Abstract
Understanding magmatic systems and deep hydrothermal circulation beneath arc-volcanoes provides insights into deep processes associated with slab-subduction and mantle-wedge partial melting. Here we analyze hydrothermal flow below a structural high (Capo Vaticano Ridge, CVR) located offshore Capo Vaticano (western Calabria) and affected by magmatic intrusions generated from above the Ionian subducting-slab. In order to explain observations, we combine geophysical and numerical modelling results. Fluid-flow modelling shows that temperature distribution and geothermal gradient are controlled mainly by hydrothermal circulation, in turn affected by heat source, fault pattern, rock permeability, basement topography and sediment thickness. Two main faults, shaping the structural high and fracturing intensely the continental crust, enable deep hydrothermal circulation and shallow fluid discharge. Distribution of seismicity at depth supports the hypothesis of a slab below Capo Vaticano, deep enough to enable mantle-wedge partial melting above the subduction zone. Melt migration at shallow levels forms the magmatic intrusions inferred by magnetic anomalies and by δ3He enrichment in the discharged fluids at the CVR summit. Our results add new insights on the southern Tyrrhenian Sea arc-related magmatism and on the Calabrian inner-arc tectonic setting dissected by seismogenic faults able to trigger high-destructive earthquakes.
Similar content being viewed by others
Introduction
Although large steps forward have been achieved on our understanding of hydrothermal processes, deep fluid circulation is still not fully explored. Likewise, a complete view of volcanic plumbing systems is hard to obtain, mainly due to their complexity and to the difficulties in obtaining direct information. Some authors suggested that magma upwelling is commonly controlled by tectonics, namely normal faults, strike-slip faults or, even if rarely, inverse faults1,2. Normal faults are more frequently associated to volcanism and hydrothermal fluids3 due to the prevailing extension controlling the release of lithostatic pressure within rocks4,5,6. Furthermore, geochemical interaction can be activated among cooling magmatic rocks, hosting rocks and hydrothermal fluids7,8,9,10,11.
Subaerial volcanoes, back-arc systems and mid-ocean ridges have been widely investigated in terms of hydrothermal vents distribution and circulation pattern by bathymetric and backscatter, magnetics, electro-magnetics, gravity and seismic methods12,13,14,15. High-resolution multibeam bathymetry constrains spatially hydrothermal activity6,16, while vent chemistry helps to determine the source of hydrothermal fluids as well as fluid crustal residence time related to rock permeability17. However, the lack of direct information, such as drilling, makes numerical modelling an important tool in understanding fluid/rock interactions and hydrothermal circulation within an active tectonic setting18,19. Modelling of deep fluid circulation constrained by geophysical data has already been proposed, as for instance that based on Self Potential (SP) and/or electromagnetic data proposed for subaerial volcanoes20,21, also part of arc/backarc systems22,23,24.
This work aims to analyze a submarine structural high located offshore Capo Vaticano along the western coast of Calabria (SE Tyrrhenian Sea), named Capo Vaticano Ridge (Figs. 1 and 2), where shallow magma injections, probably fed by a deep seated source, and hydrothermal circulation has been suggested. The tectonic setting of this structure is complicated by the presence of two main faults: the Western Offshore Fault25 (WOF), an extensional fault that controlled the SW-deepening of the adjacent Gioia-Tauro basin from Pliocene to Pleistocene; and the Ridge 1 Fault26 (R1F), a NE-SW oriented normal fault that crosses the eastern flank of the CVR. Based on aeromagnetic data, this structural high has been interpreted as a remnant of a Pleistocenic volcanic edifice27. Indeed, the presence of magmatism in the area is suggested by evidence of hydrothermal vents and by the geochemical anomalies of seawater sampled at the summit of the CVR28. However, magmatic rocks have never been recovered from the CVR and the only volcanic products believed to be generated by this hypothetical volcanic apparatus are pumices trapped within the onshore sediments of the Gioia-Tauro basin27,29. In addition, volcanic features such as craters, small cones or lava flow morphologies have never been observed along the flanks of the CVR by swath bathymetry data25,26. An alternative scenario could be that the observed seawater geochemical anomalies at the summit of the CVR are due to cold seep related fluid flow. However, the lack of a thick sedimentary cover over the CVR summit (less than 200 m)26, the lack of morphological evidence for flares and pockmarks25,26, the strong magnetic anomaly27 and the high content of mantle derived 3He in the vent escaping fluids28 prevent to follow this hypothesis.
Forward and inverse magnetic modeling combined with seismic and morpho-bathymetric images defines some features of the magnetized body at depth and outlines the ongoing tectonics shaping the ridge26. If on the one hand previous studies suggest the presence of magmatic rocks just below the top of the tectonically-controlled CVR26, on the other hand they open some questions: for instance, is the CVR the remnant of a volcanic complex that erupted during Pleistocene time? Alternatively, are the observed magnetic anomalies related to shallow dyke intrusions fed by a deeper magmatic source, with magma never having reached the surface? What is the structure of the magmatic plumbing system and where is it rooted? In order to answer these questions, we carried out numerical modeling of hydrothermal fluids and interpreted results together with all available geophysical data.
Geological Background
The Capo Vaticano Ridge is located at the transition between the Tyrrhenian back-arc basin and the Apennine chain (Fig. 1a). This is one of the most active areas of the entire Apennine system, due to the Ionian lithosphere subduction under the Calabrian Arc and to the inner arc collapse accommodated by several normal faults: a structural complexity suggested by the depth distribution (from 0 to 400 km) of the instrumental seismicity recorded in the area. The Calabrian arc is part of the Apennine-Maghrebide fold-and-thrust belt, formed by a stack of metamorphic and sedimentary units that include Hercynian and pre-Hercynian continental basement and Jurassic to Early Cretaceous Ophiolite sequences30,31. This region, originally part of the Corsica-Sardinia block, separated from it during a first Tortonian extensional phase, and drifted southward carrying the nascent Apennine belt on its top30,32,33,34. The following E and SE-ward roll-back and retreat of the Ionian slab drove the opening of the Tyrrhenian back-arc basin32 with the formation of the Magnaghi, Vavilov and Marsili volcanic complexes35, and the migration of the associated volcanic arc toward SE.
The present day subducting lithosphere defines a 70°-dipping Wadati-Benioff zone36, that under a given range of temperature and pressure conditions favoured by dehydration of the sediments above the slab, triggers mantle wedge partial melting37,38, resulting in the formation of the Aeolian Volcanic Arc39,40. The several volcanoes of the Aeolian arc are arranged in a ring shape around the Marsili volcano, west and north of Calabria and Sicily, respectively (Fig. 1a). Among the active volcanoes, the Stromboli volcanic complex lies only 70 km away from the Capo Vaticano Promontory (Fig. 1b). Finally, the modern subducting slab is bounded by two main tear faults (Subduction Transform-Edge Propagators, STEP) (Fig. 1a): (1) the Tindari-Letojanni fault to the south41; and (2) a main northern fault not uniquely defined, i.e., the Sangineto Line41 with its offshore prolongation beneath the Palinuro volcanic complex42; or the more southern Catanzaro shear zone43.
Extensional and strike-slip faults fragment longitudinally (from N-S to SW-NE) and transversally (from E-W to ESE-WNW) the Calabrian block44,45. The N-S to SW-NE-trending normal faults accommodate the rapid uplift of the Calabrian belt since middle Pleistocene time43,45,46, in particular along the western side of the belt (western Calabria), where widespread subsidence is observed47. Normal faults extend also offshore forming partially submerged graben or half-graben systems, such as the Lamezia graben43,48. The ESE-WNW trending transcurrent faults, including the WOF, accommodate differential movements of minor blocks32 since middle Miocene49. The presence of deep ESE-WNW oriented Pleistocene basins50 suggests strike slip systems with strong extensional component.
Results
Structural constraints from seismic profiles
Faults geometry and sediment thickness were obtained from depth migrated seismic profile GSE_06 (Fig. 3a, see Methods for acquisition and processing details). We calibrated the seismo-stratigraphic units using the Marta well, drilled in the inner part of S. Eufemia Gulf (Fig. 2) by the Eni S.p.A. oil company. The small misfits between the borehole stratigraphy and the main seismic reflectors are due probably to the seismic line not crossing the borehole, located northward at a distance of 3.15 km (Fig. 3b). We identified three main seismic units from Messinian to present. The top of Messinian corresponds to a high amplitude unconformity named U2 (~950 m deep at the well site) that bounds below with a poorly reflective and chaotic unit; and above with a more stratified, although less reflective, Pliocene sedimentary unit (Fig. 3c). This last is delimited at its top by another angular unconformity named U1 (~600 m deep at well location). Above U1, well-stratified horizons terminate down-dip (Fig. 3c) with downlap truncations51. This unconformity corresponds to the Pliocene-Pleistocene, transition whose seismic character is well recognized in the sedimentary basins offshore of western Calabria25,26,48,52 and onshore of Catanzaro paleo-strait50. The detailed lithology of these units is shown in the legend of Fig. 3. Within the highly reflective and stratified Pleistocenic sequence, reflectors are interbedded with chaotic material. This is due to the location of the MCS profile that runs sub-parallel to the Angitola channel crossing slope deposits affected by channels and slides/slumps (Fig. 3b); features that move sediments from the coastal area to the basin. Along the entire section, the Plio-Quaternary sequence (PQSU) shows large lateral thickness variations, particularly SW of the CVR where it is ~650 m thick, while to the NE it is only ~200 m thick (Fig. 3a).
Along profile GSE_06 we interpreted two structural highs both bounded by a couple of main extensional faults (Fig. 3a). The north-easternmost high is buried below 300 m-thick Pleistocene sediments and is located within the S. Eufemia Basin that corresponds to the southern tip of the Paola basin (Fig. 2). The continuity of reflectors above the structural high suggests that the two bounding faults ceased their activity since the end of Pliocene. Although the depth of these faults is not well constrained by the seismic profile, we suggest that the faults do not cut the entire pre-Messinian sequence reaching the maximum depth of ~1.3 km. Offshore Capo Vaticano, the PQSU and the Messinian sequences on-lap both flanks of the southernmost structural high (CVR) imaged by a transparent unit (Uv) with a specific seismic response. The two bounding faults cut the entire sedimentary sequence up to the seafloor. These faults are the WOF, presently not active25, and the R1F, probably active26. Sparker profiles (Fig. 4) acquired across the structural high (Fig. 2) delineate the trend of the R1F. This sub-vertical normal fault is revealed by the interruption and rotation of well stratified sediments on the eastern part of the Ridge 1 (Fig. 4). This sedimentary sequence has a wedge shape (Fig. 4a,b). Given the present depth of these sediments, we interpreted them as part of a low-stand system tract deposited on the continental shelf at the end of Pleistocene during the Last Glacial Maximum25,53. The R1 fault plane reaches the seafloor as evidenced by the sharp scar in the gridded swath bathymetry (Fig. 2). Southeastward, the Plio-Quaternary sediments are affected by a set of minor faults organized in a synthetic and antithetic system, confined by a SE-dipping major fault (SP 340). To the South, R1F offsets the seafloor, the entire PQSU and also the underlying units (SPK_03; Fig. 4c,d). Accordingly, R1F is a NE-SW oriented Holocene normal fault, part of the extensional system currently deforming the Calabrian Arc.
Combining bibliographic information25,54 with the high resolution morpho-bathymetry data, we determined the geometry of these two faults. WOF strikes SE-NW, it is 50 km long and according to ref. 55 has an estimated down-dip width of 22 km, while R1F strikes SW-NE and is only 15 km long with an estimated depth of 12 km.
Magnetic data analysis
Magnetic investigations across Capo Vaticano and neighboring areas aimed at recovering details of the magnetic anomaly pattern related to the high magnetized body suggested by previous studies below the faults-controlled structural-high forming Capo Vaticano Ridge. Indeed, the new shipborne data provide high resolution magnetic anomalies over the CVR (Fig. 5a) and add further details to the aeromagnetic data discussed in ref. 27.
The CVR structure displays high amplitude magnetic anomalies ranging from −169 to 468 nT, mostly oriented E-W (Fig. 5b). The dipole is clearly centered on the morphologic high with low-frequency low-amplitude anomalies in the surrounding area suggesting no other causative sources. The total intensity magnetic anomaly field was then reduced to the magnetic pole (RTP) to remove its dipolar behavior and to address a direct correlation between the maximum of magnetic anomaly and the center of the causative source (Fig. 5c). The RTP transformation was obtained by applying a phase shift in the FFT domain using the local values of inclination (54.6°) and declination (3.0°) of the Earth’s magnetic field as provided by the IGRF model56. RTP magnetic anomaly field ranges from −74 to 578 nT with the maximum centered exactly and lined-up with the summit of the structural high. The negative low-amplitude magnetic anomalies after the RTP correction, are probably related to a low-frequency contribution associated to the surrounding old and deep crustal portion. The shallowest portion of the CVR displays a strong positive RTP magnetic anomaly suggesting a shallow positively-magnetized body having the same polarity of the induced field. This allows us to define the lower bound of the timing of the emplacement of the magnetic source during the Brunhes chron (0.78–0 Ma), as previously proposed25,26.
Qualitative interpretation of the magnetic anomaly field was carried out by computing the three dimensional analytic signal (Fig. 5d). This technique integrates horizontal and vertical gradients of the magnetic signal in order to enhance the edges of the causative source57,58. The three-dimensional analytic signal results in a bell-shaped distribution having maximum amplitude along the lateral edges of the causative body. In the case of CVR, the analytic signal shows a clear circular pattern having its maximum positive value above the shallowest portion of the structural high affected by the NE-SW fault system, namely R1F26 (Figs. 2 and 5). This seems to indicate a main causative source or a cluster of sources just below the structural high without any evidence of widespread lateral additional magnetized material.
A quantitative analysis of the magnetic data provides an estimate of the average depth of the causative bodies. The depth distribution of the centroids of the magnetic sources (Fig. 5d) was computed using the Euler’s deconvolution technique59,60, based on a least-squares inversion of the Euler’s homogeneity equation for magnetic anomaly data61, adopting a structural index (SI) equal to 1 (tabular structures, sill and other intrusive features) because it provided the highest clustering of solutions. Calculations were carried out testing different values of SI (from 0 to 3) being related to the geometry of the source. The Euler’s deconvolution was applied interactively using fixed-size dynamic windows covering the entire magnetic anomaly grid. Distribution of Euler’s solutions ranges from 700 to 1700 m below the seafloor suggesting very shallow main causative bodies (Fig. 5d). Two main magnetic sources (or ensemble of sources) are clearly observed: (1) a very shallow magnetized body located at depths between 700 to 1000 m, aligned NNE-SSW and following the main tectonic pattern and the distribution of exhalation centres; (2) an E-W oriented deeper cluster of sources having an average centroids depth between 1400–1500 m with a clear deepening trend toward WSW (Fig. 5d).
Hydrothermal flow numerical modelling
Following the geological interpretation of the seismic line GSE_06, a model box including the Plio-Quaternary sedimentary sequence, the pre-Messinian acoustic basement and the two structural highs bounded by two couples of normal faults was built. Faults were simulated as regions of higher permeability, with a constant width of 50 m (Fig. 6a). The seafloor was considered to be a permeable barrier61. Finally, a magnetized body as inferred from magnetic data inversion was included into the model by a region of lower permeability and porosity when compared with the surrounding units. The model takes also into account differences in sediment thickness and in the water column as observed in the seismic image (Fig. 3). This information was used to define the initial boundary pressure conditions at the top of the model.
There are some dominant aspects that determine the temperature distribution and the fluid flow pattern within the system: fault patterns, water column and sediment thickness variations, the presence of a magnetized body and of a deep-seated magmatic body below the base of the model. Previous magnetic inversion, based on aeromagnetic data, constrains the location and the temperature of the heat source26. The magnetized body is elongated E-W with the shallowest portion centered just below the CVR, while at greater depth, up to ~6–7 km, it becomes larger eastward and northward with the northern boundary about parallel to the R1F strike25. The magnetized body requires a temperature well below the Curie temperature for magnetite (585 °C). This suggests a cooling source centered below the R1 fault with a temperature >585 °C and deeper than the modelled magnetized body (Fig. 6a). Next, we discuss the effects of model geometry and parameters on fluid flow and temperature distribution separately.
Effects on temperatures and fluid flow of faults and pressure differences
The effects of faults permeability and water column pressure variations on hydrothermal flow were investigated focusing on faults that bound the CVR. These faults are interpreted as active pathways for fluid flow because in the seismic sections they cut the entire sedimentary sequence up to the seafloor (Figs. 3 and 4). Although in the profile GSE_06, these faults are clearly identified up to a depth of 1.5 km, in our preferred numerical model (Fig. 6) we extended them up to a depth of 10 km according to the interpretation that WO and R1 faults determine and control the geometry of the structural high of the CVR. In addition, we assumed fault’s dip angles as observed in the seismic section projected perpendicular to the fault’s planes, i.e., 85° and 60° for WOF and R1F, respectively. However, in order to evaluate how fault-dip and maximum depth may affect the deep hydrothermal flow pattern, we carried out numerical experiments adopting vertical faults (Supplementary Fig. 1) and a fault extension with depth of 1.5 km (Supplementary Fig. 2). Although fluid flow velocities and flowlines are different, all models predict a convective flow below CVR with fluid escapes at its summit.
The calculated isotherms are smooth and the temperature gradient away from the CVR and the faults (Fig. 6b) is close to the initial conductive condition. Below the CVR, the resulting isotherms run sub-parallel to the faulted flanks with a temperature gradient that decreases toward the SW flank due to a predicted downward flow along the WO fault plane. On the NE flank, uprising fluid flow determines an elevated thermal gradient with a shallow circulation pattern along the R1 fault plane and flux pathways emerging at the seafloor on the summit of the CVR (Fig. 5) with relatively low flow rates (3.2232 × 10−9 m/s) and where the estimated temperatures on outlet vents vary between 10 to 100 °C, with an average temperature of 53 °C. Porous flow in a non-deformable matrix is driven mostly by rock permeability distribution (Fig. 6 and Supplementary Figs. 3 and 4) and buoyancy forces (Fig. 6 and Supplementary Fig. 5). Although the two faults in the model are simulated with the same physical parameters, they affect differently the fluid flow pattern and the temperature distribution, mostly due to convective flow determined by the heat source location. The modelled shallow flow pattern is dominated by permeability distribution, thus WOF, overlain by a Plio-Quaternary sedimentary sequence thicker than that overlying R1F, shows a downward flow of cold seawater through the shallowest part of the model with higher velocities (Fig. 6c,d). Downward fluid flow is also predicted through the R1 fault plane down to 2.5 km from the seafloor with velocities higher along the fault than across the basement due to the higher fault permeability. In the deepest part of the model below the CVR flow paths are deflected toward the R1F and deep upward flow along the R1 fault plane is predicted. This is mostly due to the higher temperatures in the central part of the bottom of the model accounting for the assumed deep magmatic body centered below R1F. Away from the CVR and its bounding faults, low flow velocities are predicted (2 × 10−11 m/s) through the entire sedimentary sequence (Fig. 6c). The buried structural high to the NE of the section does not affect much fluid flow patterns given the resulting low velocities similar to those of the sediments above.
The effects of the magnetized body on temperatures and fluid flow
The magnetized body is simulated with a different lithological unit characterized by porosity and permeability lower than the hosting rocks. The magmatic heat source is assumed to be 12 to 28 km deep25, while the associated plumbing system, originating the shallow magmatic intrusions up to ~1 km below the CVR, represents the observed magnetized body that dips toward NE26 with an angle of ~45°. Several simulations were carried out with permeability of the magnetized body ranging between 0.1 × 10−17 and 0.5 × 10−17 m2. The results do not show any significant change in fluid flow pattern but only slight changes in flow velocities and temperature distribution. However, the numerical model predicts fluid flow pathways beneath the CVR away from the magnetized body in the shallowest part of the model (Fig. 6c,d).
Discussion
Structural model and fluid flow pattern
Seismic data define the tectonic setting of the structural high forming the CVR. The depth-migrated profile GSE_06 (Fig. 3) is crucial in defining the geometry of the structural high and of the surrounding sedimentary basins furnishing the base for the geological section used in the numerical fluid-flow modeling, whereas sparker profiles and high resolution swath bathymetry highlight surficial fault patterns and present day activity of R1 fault (Figs. 4 and 7). The Pleistocene WOF and the Holocene R1F, and the location of heat-source control the thermal convective flow pattern below the CVR where a deep hydrothermal circulation pattern is predicted that may reach the depth of 10 km with the main faults serving as main pathways for fluid flow. In our model, the calculated Rayleigh-Darcy number of 4.6 is well below the critical value (17.65) required for convective flow in an open top system62. However, these two large faults representing important crustal discontinuities are able to trigger convection below the CVR, as already suggested by other authors in similar tectonic setting63,64, favored by the presence at depth of a low permeability region (the magnetized body). Our results show that the combined effects of seafloor morphology, sediments thickness, permeability distribution and of a deep magmatic cooling body can reverse the fluid-flow pattern from downward to upward along the fault planes of the two major faults. Heat source centered below the R1F induces an upward flow along the R1 fault plane that, interacting with the shallow downward circulation, forces the fluid to escape at the summit of CVR. Also the presence of a shallow magnetized body just below the CVR changes the fluid circulation path and plays an important role in promoting fluid escape at the summit of the structural high (Fig. 6). Model results are in agreement with observations. In fact, Chirp profiles acquired during the three surveys carried out in the study area, reveal a region of fluid vents confined at the summit of the CVR focused mostly in an area closer to R1 fault (Fig. 7a,b). The relatively low rate of fluid outflow estimated from the model is in agreement with the decreasing plume-height of major vents through time observed between 2010 and 2014 (Fig. 7b,c,e), and with the presence of several minor vents detected only in 2010. Vent-location spatial variability and vent-intensity temporal variations may be explained by a weak source that need time to recharge the entire system28. In addition, numerical modelling suggests high permeability zones along both fault planes despite their different chronostratigraphic age (Fig. 6).
The region of high temperature at the model bottom, simulating a deep seated cooling magmatic body (>10 km), is required in order to reverse the downward flow and to allow fluid escapes at the summit of the CVR (Fig. 6). Seawater entering within the upper crust through the main faults may interact and trigger ionic exchange with both magmatic rocks and fluids of volcanic origin. This interaction may explain the observed enrichment in δ3He relative to δ4He of the discharged fluids, a feature frequently observed at submarine volcanoes of the Eolian arc65,66,67 or in oceanic island systems68. Modeling results are in agreement with the values of δ3He measured at CVR vents28 ranging from 5.0 to 9.68%.
High resolution shipborne magnetic anomalies (Fig. 5c) confirm the presence of a highly magnetized region (>500 nT) below the central part of the CVR and across the R1F reaching a minimum depth of ~700 m, as inferred by Euler’s deconvolution results (Fig. 5d). This refines previous interpretations based on aeromagnetic data26. Furthermore, the shipborne data show a complex trend of the shallowest part of the magnetized region, with a top surface not regular or perfectly horizontal contrary to what was suggested previously. In fact, Euler’s deconvolution (Fig. 5d) reveals that the shallowest portion (depths from 700 to 900 m) of the magnetized body dips NNE, while the portion with depths from 1000 to 1500 m dips WNW. Some scattered Euler’s solutions deeper than 1500 m are present closer to the CV promontory, suggesting a magnetic body that bends at depth toward ESE, as inferred by aeromagnetic data inversion25. The complexity added by the new magnetic data suggests that the highly magnetized region is probably due to magmatic intrusions, such as sills and dykes, whose ascent has been partially controlled by the two main faults bounding the structural high. Contrary to what suggested in previous works26,27, the ascending magma has never reached the seafloor as suggested by Euler’s solution depths (Fig. 5d), and by the absence of recovered volcanic rocks and of volcanic morphologies at the summit and along the flanks of the CVR (Fig. 7).
The δ3He/δ4He anomalies in the water column suggest a very deep source, related to mantle-wedge partial melting when compared with contents of volcanic gases from subduction setting69. Generally, the depth to which a subducting slab is capable to promote partial melting of the mantle-wedge with an associated volcanic arc ranges from 86 to 160 km37,70,71. More recently, a global compilation of slab depth variations beneath volcanic arcs extended this range from 72 to 173 km72. Following the method of ref. 73, we depicted the top of the Wadati Benioff Zone (WBZ) mapping at depth earthquake hypocenters recorded from 2000 to 2018 in the southeast Tyrrhenian basin (Fig. 8a). Focal zone locations of earthquakes with magnitude ranging from 2 to 6 (Mw) describe well the Ionian subducting lithosphere below Calabria and the Tyrrhenian sea. Accordingly, the top of the WBZ below the CVR has been estimated to be ~70 km deep (Fig. 8b), in agreement with the focal depth of the event with Mw 4.4 occurred offshore Capo Vaticano on July 14th, 2018 (Fig. 8). Figure 8b shows a depth section from Capo Vaticano to Stromboli including earthquake hypocenters, top and bottom of WBZ, Moho depth35,74, crustal tectonic features and fluid circulation pattern. The WOF likely reaches the Moho discontinuity at the estimated depth of 22 km.
Temporal evolution of geochemistry of erupted lavas from the Aeolian arc suggests that Ionian slab subduction is presently ended75. In addition, geodetic measurements indicate that also subduction-plate roll-back is almost halted76,77,78 with the western Sicily that moves together with the Nubia Plate. Instead the Calabrian inner arc, decoupled from the subduction slab, is uplifting at an average rate of ~1.6 mm/a at Capo Vaticano79. This implies a reduction in down-welling mantle flow above the WBZ and an increasing distance of the overriding plate from the WBZ with a consequent rising of mantle-wedge isotherms. Thus, we suggest that the magmatic intrusions below the CVR are related to melt migration from a deep source due to partial melting of mantle-wedge favored by subdued sediments dehydration at the top of the WBZ. We suggest that WO and R1 fault-planes act as preferred pathways for melt ascent through the crust. However, the magmatic system below the CVR cannot be linked to that giving rise to the Aeolian arc, because it is located in a much inner area. It may be related to a more recent and shallower partial melting region above the WBZ due to decoupling between the Calabrian arc and the subduction slab, extending the southern Tyrrhenian arc-related magmatic system toward the inner arc (Calabria-Peloritani).
Methods
Geophysical data
Three geological-geophysical surveys (ISTEGE, ISTEGE-2, and GEOCAL-2014) were carried out offshore western Calabria between 2010 and 2014, where we collected a multiscale and multidisciplinary dataset composed by:
2231 km2 of swath bathymetry data (MB1) covering the entire S. Eufemia Gulf. More than 800 km2 of high resolution multibeam (MB2) and shipborne magnetic data covering the shallowest part of the CVR (Fig. 2);
330 km of multichannel seismic reflection (MCS) profiles (Figs. 2 and 3), 2223 km of high resolution sub-bottom Chirp profiles and about 30 km of single channel sparker profiles (Fig. 2);
Water samples by using 24-Niskin bottle Rosette and 4 HD videos recorded by ROV have been collected along the summit of the CVR; in addition to four dredging stations located on the eastern flank of the CVR where only sediments were recovered.
MB1 data were acquired using software PDS2000 by two hull mounted multibeam systems: a RESON Seabat 8111 (110 kHz) and a Seabat 8150 (12 kHz), working at two different water depth ranges that adequately combined allow to cover depth >20 m. MB2 data were acquired with package Kongsberg SIS using the Kongsberg-Maritime EM710 multibeam system (70 kHz) operating in a water depth range of 3–1200 m. The two datasets were processed in order to remove noise due to errors of the navigation and acquisition systems, and then combined to produce a regional scale map with a 20 × 20 m grid cell size and a local scale map with 5 × 5 m grid cell size. Spatial analysis and mapping were performed using the GMT package80.
Single channel sparker profiles, with sample interval of 0.25 ms and total record length of 2 s, were processed using the commercial software Focus/Disco by Paradigm in order to remove incoherent noise and improve primary energy. Processing sequence consisted of: trace editing; resampling; trace amplitude equalization and spherical divergence correction in order to recover weaker signals at depth; f-x deconvolution in order to improve lateral continuity of shallow sedimentary layers; trace mixing to improve lateral continuity and decrease random noise; time variant band pass filter; constant velocity time migration by a finite difference method adopting the water velocity (i.e., 1500 m/s).
Pre-stack depth migration
Profile GSE_06 (Fig. 3) from the MCS dataset has been selected for Pre-Stack Depth Migration (PSDM) in order to better define geometry of reflections and faults pattern. The resulting geological section was used as basis for the fluid-flow numerical modeling. Processing was performed with GeoDepth software by Paradigm applying iteratively the PSDM (based on the Kirchhoff algorithm) and adopting at each iteration a velocity grid obtained with a tomographic method. This procedure allows to define a detailed velocity model and reliable depth information. The method uses the PSDM output, represented by the Common Image Gathers (CIGs), to determine iteratively an accurate velocity field81. The first iteration is performed by using a constant velocity model (i.e., the water velocity) that allows flattening of seafloor reflections. Then, an updated velocity grid is created by using interval velocities derived from the root-mean square (RMS) velocities obtained during the conventional processing. Finally, combining seafloor reflection picking with the updated velocity field, an initial velocity model is created including constant water velocity above the seafloor and interval velocities below. The resulting velocity grid is then used to create the first PSDM section. A residual depth move-out analysis is carried out at every gathers in order to create additional interlayers. The velocity field is then updated with these two datasets as input for tomography. Iteration is repeated until all picked horizons are flattened. The final PSDM is obtained by using the last velocity grid.
Magnetic data
Shipborne magnetic data were collected with R/V Urania during cruise GEOCAL-2014, using a SeaSpy marine magnetometer towed about 180 m astern. Total magnetic field data were sampled at 1 Hz by using the specific SeaLink software suite that also provides a synchronous DGPS layback-corrected position for the tow-fish. The magnetic survey (Fig. 5a) was conducted following a set of 21 track lines oriented NW-SE and spaced 500 m apart with the outermost profiles spaced 1000 m. Two additional NE-SW control tie-lines, spaced 5000 m, were also surveyed to acquire a set of cross-over points useful for following data processing. The resulting dataset counts about more than 103400 observation points collected along 380 km of magnetic lines. Raw magnetic data were corrected removing spikes and outliers. An additional heading correction was required in order to minimize the directional magnetic contribution of the vessel mass82. Diurnal variations of the Earth magnetic field were computed using the base station data from Duronia observatory, Italy (belonging to the InterMagnet observatories); then corrected data were levelled and smoothed applying statistical analysis of cross-over error matrix. Finally, magnetic anomalies were calculated by subtracting the IGRF (International Geomagnetic Reference field) model56 from the observed Earth’s magnetic data.
Fluid flow numerical modelling
We used two-dimensional numerical simulations of coupled fluid flow and heat transport based on the finite volume method. The commercial computational fluid dynamics software ANSYS Fluent was used to calculate the models (ANSYS User Guide, 2011). Darcy’s law is assumed to hold and the fluid has uniform thermodynamic properties (i.e., thermal expansion coefficient is constant), while the density decreases linearly with temperature obeying to the Boussinesq approximation.
Initial and boundary conditions
The model box, with sizes of 52 × 10 km and based on the geological section derived from the seismic depth section GSE_06 (Fig. 3), has been discretized by a uniform triangular mesh with an area of the faces ranging from 5 m to 250 m depending on faults distance. 70533 grid nodes and 34992 triangular elements satisfying the Delaunay criterion were used in the calculation. Each litho-stratigraphic unit has been assumed non-deformable (neglecting compaction), and isotropic and homogeneous respect with its physical properties, i.e., permeability, porosity, heat capacity and thermal conductivity (Supplementary Table 1). For modeling purposes, we have considered only two main units: the pre-Messinian acoustic basement and the Plio-Quaternary sedimentary unit (PQSU). Previous studies on individual hydrothermal systems have shown that permeability variations by one order of magnitude between lithological units represent a good approximation in numerical modelling18,19,62,83. In our preferred model we assumed permeability values of 1 × 10−15 m2, 1 × 10−16 and 1 × 10−17 m2, for faults, sediments and basement, respectively. In order to explore how permeability affects flow pattern in our numerical models we carried out experiments assuming different permeability values (Fig. 6 and Supplementary Figs. 3 and 4). An open-top rectangular model box was created to carry out the simulations. At the top of water and sediments/rocks interface we assumed an initial pressure that depends on the water column height. This pressure generates a vertical flow with fluid being free to enter into geological units at constant temperature (seafloor temperature of 10 °C) and leave the system with zero cooling rate (dT/dz = 0). At the bottom of the model we assumed fixed temperature boundary conditions (300 °C) outside a central region below the CVR and part of S. Eufemia Gulf, where we assumed a temperature of 630 °C due to heat produced by a deeper cooling magmatic body. We assumed a linear temperature change from 300 °C to 630 °C at the transition between hosting rocks and the heat source at the base of the model to increase numerical stability (Fig. 6a,b). Below the CVR, in the central part of the model, the magnetized body (assumed due to solidified and cold magmatic intrusions) was simulated by a region of reduced permeability84. The vertical sides of the model were assumed to be impermeable, resulting in no fluid or heat flow transfer across the boundaries (Fig. 6).
References
Aydin, A., Schultz, R. A. & Campagna, D. Fault-normal dilation in pull-apart basins: implications for the relationship between strike-slip faults and volcanic activity. Annales Tectonicae 4, 45–52 (1990).
Tobisch, O. T. & Cruden, A. R. Fracture-controlled magma conduits in an obliquely convergent continental magmatic arc. Geology 23, 941–944 (1995).
Ellis, M. & King, G. Structural control of flank volcanism in continental rifts. Science 254, 839–842 (1991).
Pirajno, F. Hydrothermal processes and mineral systems. Springer Science, pp 1250 (2010).
Tibaldi, A., Bonali, F. & Corazzato, C. The diverging volcanic rift system. Tectonophysics 611, 94–113 (2014).
Escartin, J. et al. Hydrothermal activity along the slow-spreading Lucky Strike ridge segment (Mid-Atlantic Ridge): Distribution, heatflux, and geological controls. Earth Planet. Sci. Lett. 431, 173–185 (2015).
Alt, J. C. Subseafloor processes in mid-ocean ridge hydrothermal systems. In: Humphris, S. E., Zierenberg, R. A., Mullineaux, L. S. & Thomson, R. E. (Eds), Seafloor Hydrothermal Systems: Physical, Chemical, Biological, and Geological Interactions: Washington, DC, Geophysical Monograph 91, 85–114 (1995).
Perfit, M. R. & Chadwick, W. W. Jr. Magmatism at mid‐ocean ridges: Constraints from volcanological and geochemical investigations. In: Buck, W. R., Delaney, P. T., Karson, J. A. & Lagabrielle, Y. (Eds), Faulting and magmatism at mid‐ocean ridges: Washington, DC, Geophysical Monograph 106, 59–115 (1998).
Kilias, S. P. et al. New insights into hydrothermal vent processes in the unique shallow-submarine arc-volcano, Kolumbo (Santorini), Greece. Scientific Reports 3(2421), 1–13 (2013).
de Ronde, C. E. J. et al. The anatomy of a buried submarine hydrothermal system, Clark volcano, Kermadec arc, New Zealand. Economic Geology 109, 2261–2292 (2014).
Yang, D. et al. Lithium isotope traces magmatic fluid in a seafloor hydrothermal system. Scientific Reports 5(13812), 1–8 (2015).
Ondreas, H. et al. Recent volcanic events and the distribution of hydrothermal venting at the Lucky Strike hydrothermal field, Mid-Atlantic Ridge. Geochemistry Geophysics Geosystems 10, 1–18 (2009).
Tivey, M. A. & Dyment, J. The magnetic signature of hydrothermal systems in slow spreading environments. American Geophysical Union, Geophysical Monograph Series 188, 43–66 (2010).
Caratori Tontini, F. et al. Near-bottom magnetic signatures of submarine hydrothermal systems at Marsili and Palinuro volcanoes, south Tyrrhenian Sea, Italy. Economic Geology 109, 2119–2128 (2014).
Stucker, V. K., Walker, S. L., de Ronde, C. E., Caratori Tontini, F. & Tsuchida, S. Hydrothermal Venting at Hinepuia Submarine Volcano, Kermadec Arc: Understanding Magmatic‐Hydrothermal Fluid Chemistry. Geochemistry Geophysics Geosystems 18, 3646–3661 (2017).
Monecke, T. et al. Explosion craters associated with shallow submarine gas venting off Panarea Island, Italy. Bulletin of Volcanology 74, 1937–1944 (2012).
Chavagnac, V. et al. Spatial Variations in Vent Chemistry at the Lucky Strike Hydrothermal Field, Mid‐Atlantic Ridge (37°N): Updates for Subseafloor Flow Geometry from the Newly Discovered Capelinhos Vent. Geochemistry Geophysics Geosystems 19, 4444–4458 (2018).
Fontaine, F. J. & Wilcock, W. Two dimensional models of hydrothermal convection at high Rayleigh and Nusselt numbers: Implications for mid‐ocean ridges. Geochemistry Geophysics Geosystems 8(Q07010), 1–7 (2007).
Fontaine, F. J., Rabinowicz, M. & Cannat, M. Can high‐temperature, high‐heat flux hydrothermal vent fields be explained by thermal convection in the lower crust along fast‐spreading Mid‐Ocean Ridges? Geochemistry Geophysics Geosystems 18, 1907–1925 (2017).
Michel, S. & Zlotnicki, J. Self‐potential and magnetic surveying of La Fournaise volcano (Réunion Island): Correlations with faulting, fluid circulation, and eruption. J. Geophys. Res. 103, 17845–17857 (1998).
Aizawa, K., Ogawa, Y. & Ishido, T. Groundwater flow and hydrothermal systems within volcanic edifices: Delineation by electric self‐potential and magnetotellurics. J. Geophys. Res. 114, B01208 (2009).
Bibby, H. M., Caldwell, T. G., Davey, F. J. & Webb, T. H. Geophysical evidence on the structure of the Taupo Volcanic Zone and its hydrothermal circulation. J. Volcanol. Geotherm. Res. 68, 29–58 (1995).
Finizola, A., Sortino, F., Lénat, J. F. & Valenza, M. Fluid circulation at Stromboli volcano (Aeolian Islands, Italy) from self-potential and CO2 surveys. J. Volcanol. Geotherm. Res. 116, 1–18 (2002).
Safipour, R. et al. A self-potential investigation of submarine massive sulfides: Palinuro volcanic complex, Tyrrhenian Sea. Geophysics 82, A51–A56 (2017).
Pepe, F. et al. Pattern and rate of post-20 ka vertical tectonic motion around the Capo Vaticano Promontory (W Calabria, Italy) based on offshore geomorphological indicators. Quaternary Intern. 332, 85–98 (2014).
Loreto, M. F. et al. Geophysical investigation of Pleistocene volcanism and tectonics offshore Capo Vaticano (Calabria, Southeastern Tyrrhenian Sea). J. Geodynamics 90, 71–86 (2015).
De Ritis, R. et al. A buried volcano in the Calabrian Arc (Italy) revealed by high‐resolution aeromagnetic data. J. Geophys. Res.: Solid 115, B11101 (2010).
Loreto, M. F., Italiano, F., Deponte, D., Facchin, L. & Zgur, F. Mantle degassing on a near shore volcano, SE Tyrrhenian Sea. Terra Nova 27, 195–205 (2015).
De Rosa, R., Dominici, R., Donato, P. & Barca, D. Widespread syn-eruptive volcaniclastic deposits in the Pleistocenic basins of South-Western Calabria. J. Volcanol. Geotherm. Res. 177, 155–169 (2008).
Bonardi, G., Cavazza, W., Perrone, V. & Rossi, S. Calabria-Peloritani terrane and northern Ionian Sea. In: Vai, G. B. & Martini, L. P. (Eds), Anatomy of an Orogen: the Apennines and adjacent Mediterranean Basins: Springer, Dordrecht, 287–306 (2001).
Iannace, A. et al. The carbonate tectonic units of northern Calabria (Italy): a record of Apulian palaeomargin evolution and Miocene convergence, continental crust subduction, and exhumation of HP–LT rocks. J. Geol. Soc. 164, 1165–1186 (2007).
Malinverno, A. & Ryan, W. B. F. Extension in the Tyrrhenian Sea and shortening in the Apennines as a result of arc migration driven by sinking of the lithosphere. Tectonics 5, 227–245 (1986).
Sartori, R. The main results of ODP Leg 107 in the frame of Neogene to Recent geology of perityrrhenian areas. In: Cita, M. B., Kastens, K. A., Mascle, J. & McCoy, F. (Eds), College Station, TX, Proceedings of the Ocean Drilling Program, Scientific Results 107, 715–730 (1990).
Patacca, F., Sartori, R. & Scandone, P. Tyrrhenian basin and Apennines. Kinematic evolution and related dynamic constraints. In: Boschi, E., Mantovani, E. & Morelli, A. (Eds), Recent Evolution and Seismicity of the Mediterranean Region: Kluwer Academic Publishers, Dordrecht, Netherlands, 161–171 (1993).
Sartori, R. et al. Crustal features along a W–E Tyrrhenian transect from Sardinia to Campania margins (Central Mediterranean). Tectonophysics. 383, 171–192 (2004).
Chiarabba, C., Jovane, L. & DiStefano, R. A new view of Italian seismicity using 20 years of instrumental recordings. Tectonophysics 395, 251–268 (2005).
Tatsumi, Y. Formation of the volcanic front in subduction zones. Geophys. Res. Lett. 13, 717–720 (1986).
Davies, J. H. & Stevenson, D. J. Physical model of source region of subduction zone volcanics. J. Geophys. Res. 97, 2037–2070 (1992).
Barberi, F., Innocenti, F., Ferrara, G., Keller, J. & Villari, L. Evolution of Eolian arc volcanism (southern Tyrrhenian Sea). Earth Planet. Sci. Lett. 21, 269–276 (1974).
Bortoluzzi, G. et al. Interactions between volcanism and tectonics in the Western Aeolian sector, Southern Tyrrhenian Sea. Geophys. J. Int. 183, 64–78 (2010).
Rosenbaum, G. & Lister, G. S. Neogene and Quaternary rollback evolution of the Tyrrhenian Sea, the Apennines, and the Sicilian Maghrebides. Tectonics 23, TC1013 (2004).
Cocchi, L., Passaro, S., Tontini, F. C. & Ventura, G. Volcanism in slab tear faults is larger than in island-arcs and back-arcs. Nature Communications 8, 1451 (2017).
Brutto, F. et al. The Neogene-Quaternary geodynamic evolution of the central Calabrian Arc: A case study from the western Catanzaro Trough basin. J. Geodynamics 102, 95–114 (2016).
van Dijk, J. P. et al. A regional structural model for the northern sector of the Calabrian Arc (southern Italy). Tectonophysics 324, 267–320 (2000).
Monaco, C. & Tortorici, L. Active faulting in the Calabrian Arc and eastern Sicily. J. Geodynamics 29, 407–424 (2000).
Westaway, R. Quaternary uplift of southern Italy. J. Geophys. Res. 98, 21741–21772 (1993).
Serpelloni, E., Faccenna, C., Spada, G., Dong, D. & Williams, S. D. Vertical GPS ground motion rates in the Euro‐Mediterranean region: New evidence of velocity gradients at different spatial scales along the Nubia‐Eurasia plate boundary. J. Geophys. Res. 118, 6003–6024 (2013).
Loreto, M. F. et al. Approaching the seismogenic source of the Calabria 8 September 1905 earthquake: New geophysical, geological and biochemical data from the S. Eufemia Gulf (S Italy). Mar. Geol. 343, 62–75 (2013).
van Dijk, J. P. & Scheepers, P. J. J. Neotectonic rotations in the Calabrian Arc; implications for a Pliocene-Recent geodynamic scenario for the Central Mediterranean. Earth Sci. Rev. 39, 207–246 (1995).
Zecchin, M., Praeg, D., Ceramicola, S. & Muto, F. Onshore to offshore correlation of regional unconformities in the Plio-Pleistocene sedimentary successions of the Calabrian Arc (central Mediterranean). Earth Sci. Rev. 142, 60–78 (2015).
Mitchum, R. M. Jr., Vail, P. R. & Thompson, S. III. The depositional sequence as a basic unit for stratigraphic analysis. In: Payton, C. E. (Ed.), Seismic stratigraphy – Application to hydrocarbon exploration: Tulsa, Oklahoma, AAPG Memoir 26, 53–62 (1977).
Argnani, A. & Trincardi, F. Paola slope basin: evidence of regional contraction on the eastern Tyrrhenian margin. Mem. Soc. Geol. It. 44, 93–105 (1988).
Chiocci, F. L. & Orlando, L. Lowstand terraces on Tyrrhenian Sea steep continental slopes. Marine Geology 134, 127–143 (1996).
Tortorici, G. et al. Quaternary normal faulting and marine terracing in the area of Capo Vaticano and S. Eufemia plain (Southern Calabria). Studi Geol. Camerti 1, 155–171 (2002).
Wells, D. L. & Coppersmith, K. J. New empirical relationships among magnitude, rupture length, rupture width, rupture area, and surface displacement. Bull. Seism. Soc. Am. 84, 974–1002 (1994).
Finlay, C. C. et al. International Geomagnetic Reference Field: the eleventh generation. Geophysical Journal International 183, 1216–1230 (2010).
Nabighian, M. N. Toward a three-dimensional automatic interpretation of potential field data via generalized Hilbert transforms: Fundamental relations. Geophysics 49, 780–786 (1984).
Roest, W. R., Verhoef, J. & Pilkington, M. Magnetic interpretation using the 3-D analytic signal. Geophysics 57, 116–125 (1992).
Reid, A. B., Allsop, J. M., Granser, H., Millett, A. T. & Somerton, I. W. Magnetic interpretation in three dimensions using Euler deconvolution. Geophysics 55, 80–91 (1990).
Fitzgerald, D., Reid, A. B. & McInerney, P. New discrimination techniques for Euler deconvolution. Computers & Geosciences 30, 461–469 (2004).
Thompson, D. T. EULDPH – New technique for making computer-assisted depth estimates from magnetic data. Geophysics 47, 31–37 (1982).
Simms, M. A. & Garven, G. Thermal convection in faulted extensional sedimentary basins: theoretical results from finite‐element modeling. Geofluids 4, 109–130 (2004).
López, D. L. & Smith, L. Fluid flow in fault zones: analysis of the interplay of convective circulation and topographically driven groundwater flow. Water Resources Res. 31, 1489–1503 (1995).
Yang, J., Large, R. R. & Bull, S. W. Factors controlling free thermal convection in faults in sedimentary basins: implications for the formation of zinc-lead deposits. Geofluids 4, 237–247 (2004).
Lupton, J. et al. Active hydrothermal discharge on the submarine Aeolian Arc. J. Geophys. Res. 116, B02102 (2011).
Ligi, M. et al. Mapping of seafloor hydrothermally altered rocks using geophysical methods: Marsili and Palinuro seamounts, southern Tyrrhenian Sea. Economic Geology 100, 2103–2117 (2014).
Petersen, S. et al. Drilling shallow-water massive sulfides at the Palinuro volcanic complex, Aeolian Island Arc, Italy. Economic Geology 100, 2129–2157 (2014).
Kurz, M. D., Jenkins, W. J. & Hart, S. R. Helium isotopic systematics of oceanic islands and mantle heterogeneity. Nature 297, 43–47 (1982).
Sano, Y. & Marty, B. Origin of carbon in fumarolic gas from island arcs. Chem. Geol. 119, 265–274 (1995).
Gill, J. B. Orogenic Andesites and Plate Tectonics. Springer-Verlag, New York Minerals Rocks and Mountains 16, pp. 392 (1981).
Tatsumi, Y. & Eggins, S. Subduction zone magmatism. Cambridge, Massachusetts, Blackwell, Frontiers in Earth Science 1, pp. 224 (1995).
Syracuse, E. M. & Abers, G. A. Global compilation of variations in slab depth beneath arc volcanoes and implications. Geochem., Geophys., Geosystems. 7, Q05017 (2006).
Isacks, B. L., & Barazangi, M. Geometry of Benioff zones: Lateral segmentation and downwards bending of the subducted lithosphere. In: Talwani M. & Pitman, W. C. III. (Eds), Island Arcs, Deep Sea Trenches and Back‐Arc Basins: Washington, D.C., AGU Ewing Series 1, 99–114 (1977).
Cassinis, R., Scarascia, S. & Lozej, A. The deep crustal structure of Italy and surrounding areas from seismic refraction data; a new synthesis. Boll. Soc. Geol. It. 122, 365–376 (2003).
De Astis, G., Ventura, G. & Vilardo, G. Geodynamic significance of the Aeolian volcanism (Southern Tyrrhenian Sea, Italy) in light of structural, seismological, and geochemical data. Tectonics 22(1040), 1–17 (2003).
Goes, S. et al. A recent tectonic reorganization. in the south-central Mediterranean. Earth Planetary Science Letters 226, 335–345 (2004).
Serpelloni, E. et al. Kinematics of the Western Africa-Eurasia plate boundary from focal mechanisms and GPS data. Geophysical Journal International 169, 180–200 (2007).
Argnani, A. Evolution of the Southern Tyrrhenian slab tear and active tectonics along the western edge of the Tyrrhenian subducted slab. Geological Society of London Special Publications 311, 193–212 (2009).
Antonioli, F. et al. Late Pleistocene to Holocene record of changing uplift rates in southern Calabria and northeastern Sicily (southern Italy, Central Mediterranean Sea). Tectonophysics 422, 23–40 (2006).
Wessel, P., Smith, W. H. F., Scharroo, R., Luis, J. F. & Wobbe, F. Generic Mapping Tools: Improved version released. EOS Transactions of AGU 94, 409–410 (2013).
Yılmaz, Ö. Seismic Data Processing. Processing, inversion and interpretation of seismic data. Doherty, S. M. (Ed.), Society of Exploration Geophysicists, Tulsa, Oklahoma, Investigations in Geophysics 10, pp. 2027 (2001).
Caratori Tontini, F. et al. Potential-field modeling of collapse-prone submarine volcanoes in the southern Tyrrhenian Sea (Italy). Geophysical Research Letters 37(L03305), 1–5 (2010).
McKenna, J. R. & Blackwell, D. D. Numerical modeling of transient Basin and Range extensional geothermal systems. Geothermics 33, 457–476 (2004).
Umakoshi, K., Shimizu, H. & Matsuwo, N. Volcano-tectonic seismicity at Unzen Volcano, Japan, 1985-1999. J. Volcanol. Geotherm. Res. 112, 117–131 (2001).
Acknowledgements
Work supported by the Italian Consiglio Nazionale Ricerche. Seismic data interpretation was carried out through IHS Kingdom Suite software, freely available to us in the frame of IHS University Grant Program. We thank V. Ferrante, F. Spagnoli and S. Canese for their support during data acquisition. We are particularly indebted to Captain V. Lubrano Lavadera and the officers and crew of the R/V Urania for their professionalism and efforts in assuring a successful GEOCAL-2014 cruise. We thank Editor J. Fernadez, E. Bonatti and four anonymous referees for their comments that helped to clarify and improve this paper. M.L. is particularly grateful to Dott. M. Brunori, and medical and para-medical staff of Ospedale Riuniti Marche Nord for their support during recovering from a serious illness. The present paper is dedicated to the memory of Serkan Uner who died prematurely. This is ISMAR‐CNR, Bologna, scientific contribution n. 1993.
Author information
Authors and Affiliations
Contributions
M.F.L. developed the ideas and the methods for this study. M.F.L. and M.L. wrote jointly the paper. M.F.L., L.C., F.M., P.G. and M.L. acquired the R/V Urania dataset used in this study. D.D.-D. and S.U. carried out the numerical fluid-flow modelling. N.O. and Y.I.-A. performed the Pre-Stack Depth Migration of profile GSE_06. L.C. and F.M. processed and interpreted the magnetic data. All the authors discussed extensively the results and the interpretations.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Loreto, M.F., Düşünür-Doğan, D., Üner, S. et al. Fault-controlled deep hydrothermal flow in a back-arc tectonic setting, SE Tyrrhenian Sea. Sci Rep 9, 17724 (2019). https://doi.org/10.1038/s41598-019-53696-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-019-53696-z
- Springer Nature Limited