Abstract
Erebus volcano, Antarctica, with its persistent phonolite lava lake, is a classic example of an evolved, CO2-rich rift volcano. Seismic studies provide limited images of the magmatic system. Here we show using magnetotelluric data that a steep, melt-related conduit of low electrical resistivity originating in the upper mantle undergoes pronounced lateral re-orientation in the deep crust before reaching shallower magmatic storage and the summit lava lake. The lateral turn represents a structural fault-valve controlling episodic flow of magma and CO2 vapour, which replenish and heat the high level phonolite differentiation zone. This magmatic valve lies within an inferred, east-west structural trend forming part of an accommodation zone across the southern termination of the Terror Rift, providing a dilatant magma pathway. Unlike H2O-rich subduction arc volcanoes, CO2-dominated Erebus geophysically shows continuous magmatic structure to shallow crustal depths of < 1 km, as the melt does not experience decompression-related volatile supersaturation and viscous stalling.
Similar content being viewed by others
Introduction
Alkalic volcanoes in rift settings stand in stark contrast to calc-alkaline volcanoes in arcs, such as the ring of fire around the Pacific Ocean. Arc magmas typically have volatiles dominated by H2O from dehydration of subducted oceanic crust. Basaltic alkalic magmas are CO2-rich because they result from low degrees of partial melting of a mantle source often showing signs of being complexly metasomatized1. Rift settings and alkalic magmas contribute enormous amounts of CO2 to the global exosphere budget, with climate-forcing level increases of atmospheric concentrations documented several times during Earth’s history2. Phonolitic-series magma is alkali-rich and highly evolved from its parental basanite. Mount Erebus is the only phonolitic volcano with a persistent summit lava lake3. Compositionally uniform phonolitic lavas have dominated Erebus volcano eruptions for the last 17 ka4 (Fig. 1). Phonolite magmas in other settings have been explosively destructive5. However, they also provide important resources such as rare earth elements and precious metals and thus are important to understand6,7. Erebus offers a unique opportunity to investigate magmatic system processes from the mantle source to the surface and the enigmatic tectonic-structural controls of extensional magmatism and volatile release.
The alkali-rich Erebus phonolite has been modeled as evolving by fractional crystallization of a parental basanite sourced from an enriched upper mantle through a series of intermediate composition magma reservoirs3,8,9. Simplistic calculations suggest the formation of Erebus volcano requires >4000 km3 of basanite, which in turn requires low degrees of partial melting of >80,000 km3 of the upper mantle peridotite3. CO2 emissions from the Erebus lava lake and fumaroles exceed the rates possible from estimated magmatic solubilities and crystallization, thus requiring deep-sourced, upper mantle CO2 streaming through the plumbing system. This gas flux is an important heat supply, buffering the conditions of final phonolite differentiation that is modeled to be near 1000 °C in the 4–7.5 km depth range9,10,11,12. Its desiccating effect raises the solidus temperature of the magma promoting crystallization and differentiation. Despite intriguing insights from igneous petrology, no geophysical images have been obtained to date which reveal the source-to-eruption magmatic process including external controls on pathways and staging.
Ross Island lies at the southern end of the late Miocene to Recent Terror Rift (Fig. 1), which is located within the larger and older Victoria Land Basin13,14. The Terror Rift terminates to the south across a broad region called the Discovery accommodation zone (Fig. 1) via a series of high-angle, antithetic shears14,15,16 trending roughly E–W. Often included in these is the inferred Ross fault, conjectured based on aeromagnetic data15,17. Globally, accommodation zones are strongly associated with magmatism and alteration, and both may be influenced by pre-existing structures18,19. Erebus volcano dominates Ross Island and is radially surrounded at roughly 120 degrees by volcanic systems at Mount Bird and Mount Terror and on the Hut Point peninsula3. These visible edifices on Ross Island clearly demonstrate the late Miocene-present, Phase II basanite-phonolite trend of the broader Erebus volcanic province that extends into Victoria Land20. Erebus started forming about 1.3 Ma and is still active with many recent eruptions of lava flows around and to the southwest of the summit21,22. The magmatic evolution of the Erebus lineage contrasts with rocks sampled by the Dry Valley Drilling Project (DVDP) at the surrounding centers3,8. Olivine-hosted melt inclusions show that all magmas on Ross Island were very CO2-rich. However, the DVDP eruptions were short-lived and possessed greater water contents. No primitive mantle-derived basanites have been reported at Erebus itself, but those from the surrounding volcanic centers are considered to represent its parental magmas3,8.
The lack of deep-seated magmatic seismicity and crustal-scale earthquakes on Ross Island area reduces the resolution of seismic exploration of the volcanic system at all but the shallowest levels. Available sources for seismic imaging of Mount Erebus summit area include Strombolian eruptions, icequakes, very long-period gas slug ascent signals, surface and body wave interferometric effects, and shallow artificial explosions23,24,25. These seismic results indicate a complex velocity distribution in the uppermost few kilometers potentially corresponding to multiple intrusions and alteration zones. A common feature of the seismic models is a low-velocity channel dipping west-northwest for a few kilometers from the summit crater that appears to contain the source region for very long-period seismic signals26. However, seismic survey limitations leave a large gap in imaging, from a few kilometers depth in the crust through to the uppermost mantle. Global teleseismic tomography provides velocity models at scales tens of km or greater27,28,29.
We are able to achieve a whole-system description of an active, CO2-dominated rift volcano using the magnetotelluric (MT) geophysical technique. The MT data interpreted here provide structural resolution superior to seismic studies to date by imaging the electrical resistivity of the Erebus system continuously from the near-surface to a depth of tens of kilometers. This is possible due to the very broad bandwidth of the MT signals (~0.005–900 s wave period) and the relatively dense site spacing (1–5 km) covering the entirety of Ross Island. Polar regions such as Ross Island present additional challenges for MT data collection and processing30 (i.e., high-impedance electrical contact, non-plane wave source effects). A rigorous approach31 is applied to ensure high fidelity MT data and models (“Methods”, Supplementary Information and Supplementary Figs. S1–S4). Our study identifies the magmatic system beneath Erebus volcano from its upper mantle source through the crust. We argue that dynamic intersection of the Terror rift and accommodation zone fault structure may control the geometry and style of magma transport and storage in the Mount Erebus system. We also show that this CO2-dominated volcano possesses a unique geophysical structure compared to H2O-rich subduction arc andesitic systems due to their fundamentally different chemical physics of volatile exsolution.
Results
Phase-tensor analysis
Even before formal data inversion is undertaken, first-order features of the internal structure of Mount Erebus can be seen in the measured MT data, such as the impedance phase tensor32,33,34 (Φ) (“Methods” and Supplementary Information). The quantity Φ has the advantage that it can distinguish local changes in the shallow geology from deeper structural zones (e.g., static distortion). Φ can be defined graphically by an ellipse, where ellipse fill color represents a quantity termed (Φ2) the geometric mean of maximum and minimum phase that is not dependent on the coordinate system. The ellipticity represents the way that the data vary with azimuth i.e., is data 1D or 2D/3D. A value of Φ2 > 45o (denoted by warm fill color) indicates decreasing resistivity with depth, while Φ2 < 45o (cool fill color) implies resistivity increasing with depth, for the depth range sensed by the periods in question35.
The observed Φ ellipse response map over Ross Island at a mid-range period of 10.7 s (Fig. 1 and Supplementary Fig. S5) shows warm colors (high values) southwest of Erebus summit extending towards Capes Royds and Evans to the west and Turks Head to the south. The area of warm ellipses (Fig. 1) lies within the sector of younger phonolitic vents and flows noted previously southwest of Erebus crater21 corresponds with a general drop in apparent resistivities in that area (Supplementary Fig. S6). The cooler colors of Φ2 north and east of Erebus summit and over central and eastern Ross Island imply higher resistivity with depth, suggesting a lack of crustal-scale magmatic activity, while orientations are responding to large-scale resistivity structural grain. The observed vertical magnetic field transfer function or induction arrows K where Hz = −K · H point toward regions of lower resistivity (“Methods” and Supplementary Information). They come in two main groupings (Supplementary Fig. S7), one local to and pointing toward the summit crater, and the other clustered around the island shore and pointing toward the seawater and other possible offshore structures.
Inverse modeling
The resistivity model of Ross Island and Mount Erebus obtained by 3D nonlinear inversion explicitly includes topography and bathymetry (Supplementary Fig. S8) The adequacy of the mesh discretization was demonstrated through convergence calculations and the physical behavior of refracted EM waves36. The starting model for the inversion was a uniform 100 Ωm half-space. This value is a typical bulk crustal resistivity for active terrains in our experience, and also is consistent with volatile-free upper mantle peridotite at average thermal conditions37. The starting model included the surrounding bathymetry where seawater resistivity of 0.3 Ωm was imposed38. The phase ellipse, invariant apparent resistivity and induction arrow responses of the starting model (Supplementary Figs. S9–S11) highlight the need to include topography and bathymetry in the inversion. In particular, the Erebus crater edifice induces a pronounced drop in apparent resistivity that could be misinterpreted as anomalous volcanic structure if the topographic effect was not included36,39. The cluster of induction arrows local to and pointing toward the summit crater appears explainable largely by the topography alone.
The final models we show emphasize inversion of the four complex elements of the impedance tensor Z defined as E = ZH (“Methods” and Supplementary Information). A 5% impedance element floor was applied (see Supplementary Information). We could not define good constraints on possibly thick sedimentary sections offshore16,40 and the MT vertical magnetic field transfer function is comprised entirely of secondary vertical magnetic field variations sensitive to lateral changes (“Methods” and Supplementary Information). The vertical magnetic field transfer function data hence were down-weighted with an error floor of 0.075 and restricted to periods less than 100 s in separate trial inversions. The impedance inversion exhibited monotonic convergence (Supplementary Fig. S12) and achieved an overall good normalized root-mean-square (nRMS) fit of 1.29 (Supplementary Fig. S13). The computed phase ellipses and apparent resistivities of this model compare closely to the observations (Supplementary Figs. S14 and S15). Example sounding curves west and east of Erebus summit crater are shown together with inversion model computed responses in Supplementary Fig. S16. The vertical magnetic field response is broadly consistent with the presented model structure (Supplementary Information and Supplementary Fig. S17). Inversion modeling using the vertical magnetic field transfer function in a constrained fashion yields a similar structure (Supplementary Figs. S18 and S19).
The 3D inverse resistivity model is displayed in a series of slices in both map and section views (Figs. 2 and 3). Spanning Ross Island and its near offshore areas in the upper 3–5 km is a rather clumped, low-resistivity layer beneath an irregular resistive thin quasi-layer (Figs. 2a, b and 3). That sequence is consistent with being a low-temperature clay alteration blanket that is typical of volcanic systems41,42,43, overlain by the youngest volcanic rocks, which are not altered significantly due to low temperatures and lack of a well-developed groundwater/hydrothermal system. This blanket is thickest in the southwest sector of Ross Island where the young lava flows are concentrated (Fig. 3) and explains the concentration there of phase ellipse values exceeding 45o (warmer colors) at 10.7 s and nearby periods (Fig. 1 and Supplementary Fig. S20). Oxygen isotope trends in the phonolitic lavas can be explained by limited incorporation of this hydrothermally altered rock9. We do not discuss this zone further.
The most striking and important feature of the 3D model is an elongate low-resistivity volume shown projecting from upper mantle depths, extending through the crust, and reaching Erebus summit (Figs. 2 and 3). The low-resistivity trend changes abruptly from being steeply upward, to possessing a shallow dip from 15–20 km depth in the lower crust and heading eastward. This low-resistivity segment continues to beneath the active crater, where it again turns steep and narrows toward the surface. The most visible impact of this conductor on the measured data is to induce warmer-colored phase ellipses of high ellipticity under the west-central portion of Ross Island at longer periods (Supplementary Fig. S21). A secondary compact and less conductive body lies between Mounts Terra Nova and Terror east of the main low-resistivity conduit (Figs. 2 and 3), but does not appear to extend to depth. Resistive middle to deep crust and uppermost mantle characterizes the eastern extent of Ross Island beneath the older Mount Terror area (Fig. 3).
Model testing
Beyond the prior tests on crustal contributions to the observed MT response, it is important to assess the requirement that low-resistivity structure extends into upper mantle depths where the basanite parental magma is generated3. To do this, we have run a constrained inversion (Fig. 4) where the model is clamped at the starting guess of 100 Ωm below the Ross Island Moho27,28 (~23 km depth). The inversion test differs from the simpler forward runs (Supplementary Information) in that the constrained inversion allows the additional structure to form elsewhere in the crust in an effort to compensate for the prevention of structure in the upper mantle. The inversion converged in 18 iterations to a nRMS minimum of 1.33, which is a modest increase from that of the preferred model at 1.29. Systematics to the nRMS increase are subtle although we suggest a slight preponderance of increases west of the crater (Supplementary Fig. S22).
The preferred unconstrained inversion model is compared with the Moho constrained model in W–E and N–S sections (Fig. 4). As expected, the constrained inversion pushes additional conductivity (low resistivity) vertically into the lower crust from the upper mantle where it was prevented from forming in order to replicate the response. The lowest resistivities fall to as small as 0.3 Ωm in the core of the main conductor at depths around 10 km; a value barely reached in the unconstrained inversion, it is significantly more prominent in the constrained. In addition, the constrained inversion shows higher resistivities flanking the main central conductor so that there also is an overall increase in resistivity contrast relative to the unconstrained inversion. Hence, more extreme model characteristics are required in the constrained model to achieve a similar data fit.
To investigate further, we have taken the computed response of the constrained inversion models (Fig. 4b, e), and added Gaussian noise to each response value equal to each data error in the field observation set. Gaussian noise was computed using the routines Ran2 and Gasdev44. The synthetic dataset was then inverted using the same inversion parameters as the preferred model (Figs. 2 and 3). If the extension of significant low-resistivity structure into the upper mantle in the preferred model is merely the result of regularization (smoothing), then a similar feature should form in this synthetic inversion even though the causative response structure has been confined to the crust. The model formed after 18 iterations from the synthetic, noise-added data appears in Fig. 4c, f. The nRMS achieved was 0.93, which is lower than values achieved for the natural dataset due to modest non-idealities in the latter (e.g., occasional data scatter apparently greater than the nominal error values).
Nevertheless, the recovered model low resistivity resides almost entirely in the crust (Fig. 4c, f) with little extension below the Moho. The slight extension that does appear continues to the southwest and does not become vertical, which is as expected with no information to the contrary. Hence, while the precise characteristic of the observations leading to the upper mantle low resistivity in the model (Figs. 2, 3, and 5) is not obvious, this test inversion implies that extension vertically downward west of the summit crater is required. Additional volumetric renderings (Supplementary Fig. S23) further illustrate the orientation of the westward dipping, high conductivity zone.
Discussion
In light of the low resistivity expected for melts, it is compelling to associate the rising volume of low resistivity from west of Mount Erebus with the main conduit delivering magma and CO2 vapor upward45. The steep upper mantle portion of the conductor lies approximately in the southward projection of the eastern bounding normal fault of the Discovery half-graben14 (Fig. 1), which shows >4 km of offset through the Miocene to the present. It is hence reasonable to correlate the concentrated active extension with upper mantle upwelling and partial fusion. Lab studies46 have shown that phono-tephrite magma at a plausible temperature of 1250 °C has a resistivity of 1–0.3 Ωm for water contents of 0–3 wt. %. The nominal lowest resistivity in our inversion model at depths of 40–50 km is ~3 Ωm although uncertainty is substantial (Supplementary Information). Nevertheless, the deeper aspects of our model could be explained by a few 10 s % melt by volume.
For crustal levels, the resistivity of dry phonolite melt at 1000 °C, the interpreted temperature of the magma storage zone in the 4–7.5 km depth range9,10,11, is ~1 Ωm46. At somewhat higher temperatures with limited water contents that may pertain to greater crustal depths10,11, resistivities46 could be as low as 0.3 Ωm for 1050 °C, 1.1 wt % H2O. This would suggest almost pure liquid melt in the core of the inverted resistivity structure (Figs. 2 and 3), although exact melt fraction estimates using crystal-melt mixing models45 may not be justified given the effect of model regularization. In addition, a change in melt temperature by a mere 50 °C may lead to melt resistivity46 changing by a factor of at least 1.5. Dry CO2 is a nonpolar molecule, which in principle should not carry significant solute47 and thus not be conductive. However, speculatively there may be yet unrecognized minority volatile phases that could contribute to the conductivity thereby reducing the melt fraction needed to explain the observed resistivity anomaly.
It also seems inescapable that the abrupt turn in magma/fluid trajectory in the deep crust from being steep below the Moho, to being east-moving upward to the summit, is structurally controlled (Fig. 5a). We argue that this sharp turn represents a sort of choke-point or bottleneck where magma evolution and degassing may be promoted (Fig. 5). It is at the appropriate depth to represent the inferred “nozzle”10 across which periodic injections of parental basanite and less evolved tephrophonolite together with mantle-sourced CO2 appear to take place. Melt inclusions within anorthoclase crystals in expelled phonolitic lava bombs suggest incorporation depths approaching 15 km10, which lie toward the deeper reaches of our moderately west-dipping mid-crustal conductor.
The inferred magmatic/volatile cycling, together with the implication from the low-resistivity geometry that the oblique Terror Rift and accommodation zone structures may intersect in the deep crust, are strongly suggestive of fault-valve behavior48,49. In this phenomenon, externally sourced fluids from depth build in pressure near the mid-crustal, brittle-to-ductile rheological transition. Sufficient pressure increases may trigger dilational rock rupture or shear activation of favorably oriented planes of pre-existing weakness48,50. Such structural failure, in concept, temporarily extends embrittlement downward into otherwise ductile material tapping pressurized fluids or, in this case, CO2 vapor and melt. Upward channelized escape of CO2 could entrain deeper less evolved magma such as evident in the melt inclusions10 (Fig. 5b). This process may repeat if the vapor supply continues for a prolonged period. Unless differential stresses are already great, the requisite fluid pressures will be a significant fraction of lithostatic, and well above hydrostatic, across the range of extensional to compressional stress regimes49. The build-up of magma and CO2 originating in the upper mantle plausibly occurs at the deep crustal transition from relatively ductile behavior below to brittle behavior above the sharp turn in the major conductor. Seismic activity since first recorded in 1973 has been dominated by Strombolian eruptions and infrequent tremor, with no crustal earthquakes reported51, but seismic array coverage has been limited.
That pulsed mantle CO2 streaming may reflect opening of crustal fractures to release deep fluid overpressures has been suggested previously10. The E–W trend of our main crustal conductor, which we portray as lying in a hypothetical Erebus fault zone (Figs. 1 and 5), is somewhat oblique to, but not strongly disoriented from, the interpreted regional Ross fault. We hence suggest that accommodation zone structures effecting southward termination of the Terror Rift may control the geometry of the pathway transporting Erebus magmas and CO2 vapor toward the surface. The portrayed Erebus fault zone closely parallels the trend of the summits of Erebus, Terra Nova and Terror, which were proposed to occupy a large-scale, E–W fissure generated by upward mantle plume pressure centered on Erebus3,8. That fissure was not postulated to extend west of Mount Erebus, nor do we see low-resistivity trends projecting toward Mount Bird or Hut Point peninsula in any companion fissures, but some form of E–W structural weakness along Ross Island is still proposed.
The probable extension of the main conductor into the upper mantle is comparable to the petrological source region of the parental basanite magmas plus deep differentiation with upwelling to tephri-phonolitic compositions10 (Fig. 5b). This seems the likely pathway also for the steady CO2 streaming from the upper mantle that provides the principal heat source and controlling volatile environment for the crustal phonolite differentiation. Mount Erebus volcano is unique in the Southern Victoria Land region in possessing a sustained connection of upper mantle parental magma and CO2 gas, whereas the surrounding magmatic vents Hut Point, Dry Valleys, Mount Terror, and Mount Bird districts are characterized by higher water content and were short-lived with little heat/melt resupply8. Deep extension and its complex termination associated with the southern end of the Discovery graben may be required to make space for buoyant ascent of magma and gas through a region of ductile lithology from the source region of CO2-rich basanite melt. The origin of carbon dioxide in volcanic regions is typically ascribed to previously subducted carbonates or to plumes52, although the depth and age of the source for Ross Island and Victoria Land are debated53,54.
It is significant that the low-resistivity zone beneath Erebus volcano extends continuously upward to within ~1 km of the surface under the crater (Figs. 3 and 5a). This illustrates a fundamental difference between CO2-dominated volcanoes and the more familiar H2O-dominated subduction arc systems. Low-resistivity zones under arc volcanoes are typically confined to depths greater than 5 km, as exemplified by Mounts Ruapehu55, St Helens35,39,56, Tongariro43,57, Naruko42, and Azumayama58. Coincident seismic low velocity or high attenuation structures in the middle crust have been widely reported58,59,60,61,62. The depth of magma bodies beneath subduction zone volcanoes may be controlled by the amount of H2O that is dissolved in the magma63,64, although rheology could play a role65. Magma bodies beneath subduction arc volcanoes at such depths are water-saturated at ~4 wt % H2O, which in turn is the water content typically inferred from crystal-melt inclusions in arc eruptive products63,64. Because the water solubility of such magmas decreases as pressure decreases, upward motion of magma can lead to supersaturation, water exsolution and viscous stalling63,64.
Phonolitic magmas at similar depths certainly are capable of carrying a similar content of dissolved water6. However, the upper crustal phonolite magma at Mount Erebus, as inferred from crystal-melt inclusions, is very dry, on the order of 0.1 wt. % H2O10. This water content would result in saturation only within a few hundred meters of the surface6,63,64. The dry state at shallow depths is believed to be the result of magma dessication via streaming of the dominant mantle-sourced CO2 vapor10. The amount of CO2 dissolved in the present phonolite magma is relatively small, <1 wt %, which degasses mostly passively in the Erebus crater lava lake10. As a result, the upwelling Erebus phonolite magma does not stall through volatile exsolution as observed in arc volcanos. This results in the continuous magmatic system that is clearly imaged by MT data as a low-resistivity pathway extending from the upper mantle to the summit crater of Mount Erebus. The lack of volatile exsolution-related stalling may in part explain the unusually long-standing, open conduit/lava lake conditions that characterize the Mount Erebus system. The primary tectono-structural fault-valve dynamic of the Erebus magmatic system represents an inherited tectonic control that regulates magma movement to the upper crust and CO2 flow to Earth’s atmosphere. Further data collection to increase survey aperture to the southwest could provide improved resolution of the deeper magmatic system in the upper mantle.
Methods
The magnetotelluric method
MT exploits natural electromagnetic (EM) wavefields, generated by global lightning and ionospheric electrical current sources, to resolve Earth resistivity (sometimes referred to by its inverse, conductivity) structure. The broadband nature of the sources (0.002 to >1000 s wave period, or 500 to <0.001 Hertz frequency) allows resolution from ~100 m depth (high-frequency or short-period data) to the upper mantle (low-frequency or long-period data)66. Resistivity is sensitive to small amounts of fluids (including melts)45 and has yielded insightful images of shield volcanic systems, revealing likely source zones, pathways, and inherited controlling structures. However, to date, this method has been applied mainly in subduction arc regimes35,42,43,55,56,57,67,68.
Magnetotelluric survey
During three-austral summer field campaigns from 2014 to 2017, MT measurements were completed mainly via helicopter deployment yielding 129 high-quality sites over Mount Erebus and the greater Ross Island region (Fig. 1). Station occupation times varied from a minimum of 3 days to a maximum of 12 days. Station spacing was 1.5–2 km surrounding the Erebus edifice and increased to ~5 km for distal sites on the McMurdo and Ross ice shelves. To overcome the high contact impedance of polar ice sheets when measuring the electric field component, custom buffer preamplifiers were deployed at each bipole electrode (Supplementary Information and Supplementary Fig. S1), as is now standard30,31,69,70,71,72.
High-quality MT tensor impedance (Z) and vertical magnetic field (K, induction arrow) transfer functions generally were obtained for the period band of 0.004–1000 s through robust remote reference outlier removal66, using both magnetic and electric reference fields. Nonplanar EM wave components that did not meet the MT assumption were either negligible or successfully removed, as verified by comparing MT response functions during high and low diurnal signal intervals30,31,72 (Supplementary Information, Supplementary Figs. S2–S4). Data at each station were collected in geomagnetic co-ordinates, and then rotated to a coordinate system having the x-axis aligned with Mercator north as shown in Fig. 1 for modeling.
Phase-tensor analysis and inversion
The electric field recorded in MT measurements is commonly distorted through near-surface heterogeneity (e.g., complex surficial geology including alteration zones, and different volcanic units/structure) of the resistivity structure33. The phase tensor Φ, preserves the underlying regional phase information free from distortion32,34. The phase relationship intrinsic to the impedance tensor Z forms a second rank 2D tensor32,34 defined by the matrix equation Φ = X−1 Y where X = Re(Z) and Y = Im(Z). Φ is an observational indication of the inherent large-scale variations in resistivity structure32,33,34,35, illustrated graphically as an ellipse with the greatest and least phase corresponding to the principal axes of the ellipse.
Because the propagation of EM wavefields in the Earth at typical periods is diffusive, and measured data are finite in number and contain errors, constructing a stable 3D resistivity model of the Erebus magmatic system requires stabilized nonlinear inversion. To create this we apply the HexMT finite element algorithm36,39 which can accommodate the steep topography of Ross Island and Mount Erebus in the MT response through vertical deformation of its hexahedral elements. Stabilization (regularization) of the isotropic resistivity model was achieved using the common approach of damping (smoothing) of the model. Diffusive propagation also means that signals attenuate downward according to frequency; thus, structural resolving scales broaden with depth. Model robustness and feature necessity were verified through resolution testing (Supplementary Information), where features are perturbed and resultant change in data misfit or model plausibility assessed.
Data availability
The observed MT dataset in community standard edi format has been uploaded to the USAP-DC repository with https://doi.org/10.15784/601493.
Change history
13 July 2022
A Correction to this paper has been published: https://doi.org/10.1038/s41467-022-31694-6
References
DasGupta, R., Hirschmann, M. M. & Smith, N. D. Partial melting experiments of peridotite+CO2 at 3 GPa and genesis of alkalic ocean island basalts. J. Petrol. 48, 2093–2124 (2007).
Foley, S. F. & Fischer, T. P. An essential role for continental rifts and lithosphere in the deep carbon cycle. Nat. Geosci. 10, 897–902 (2017).
Kyle, P. R., Moore, J. A. & Thirlwall, M. F. Petrologic evolution of anorthoclase phonolite lavas at Mount Erebus, Ross Island, Antarctica. J. Petrol. 33, 849–875 (1992).
Kelly, P. J., Kyle, P. R., Dunbar, N. W. & Sims, K. W. W. Geochemistry and mineralogy of the phonolite lava lake, Erebus, Antarctica:1972-2004 and comparison with older lavas. J. Volc. Geoth. Res. 177, 589–605 (2008).
Self, S., Gertisser, R., Thordarson, T., Rampino, M. R., & Wolff, J. A. Magma volume, volatile emissions, and stratospheric aerosols from the 1815 eruption of Tambora. Geophys. Res. Lett. 31, https://doi.org/10.1029/2004GL020925 (2004).
Webster, J. D., Goldoff, B., Sintoni, M. F., Shimizu, N. & De Vivo, B. C-O-H-Cl-S-F volatile solubilities, partitioning, and mixing in phonolitic-trachytic melts and aqueous-carbonic vapor ± saline liquid at 200 MPa. J. Petrol. 55, 2217–2248 (2014).
Dostal, J. Rare earth element deposits of alkaline igneous rocks. Resources 6, 12 (2017).
Iacovino, K., Oppenheimer, C., Scaillet, B. & Kyle, P. Storage and evolution of mafic and intermediate alkaline magmas beneath Ross Island, Antarctica. J. Petrol. 57, 93–118 (2016).
Owens, L., Kyle, P. R., Sharp, Z. & Campbell, A. Origin of low oxygen isotopic compositions in alkalic lavas from Erebus volcano, Antarctica. Geochim. Cosmochim. Acta 308, 310–325 (2021).
Oppenheimer, C. et al. Mantle to surface degassing of alkalic magmas at Erebus volcano, Antarctica. Earth Planet. Sci. Lett. 306, 261–271 (2011).
Moussallam, Y., Oppenheimer, C., Scaillet, B. & Kyle, P. Experimental phase equilibrium constraints on the phonolite magmatic system of Erebus volcano. Antarctica. J. Petrol. 54, 1285–1307 (2013).
Rasmussen, D. J. et al. Understanding degassing and transport of CO2-rich alkalic magmas at Ross Island, Antarctica using olivine-hosted melt inclusions. J. Petrol. 58, 841–861 (2017).
Storti, F., Balestrieri, M. L., Balsamo, F., & Rossetti, F. Structural and thermochronological constraints to the evolution of the West Antarctic Rift System in central Victoria Land. Tectonics 27, https://doi.org/10.1029/2006TC002066 (2008).
Sauli, C. et al. Neogene development of the Terror Rift, Western Ross Sea, Antarctica. Geochem. Geophys. Geosys. 22, https://doi.org/10.1029/2020GC009076 (2021).
Wilson, T. Cenozoic structural segmentation of the Transantarctic Mountains rift flank in southern Victoria Land. Glob. Planet. Change 23, 105–127 (1999).
Aitken, A. R. A., Wilson, G. S., Jordan, T., Tinto, K. & Blakemore, H. Flexural controls on late Neogene basin evolution in southern McMurdo Sound, Antarctica. Glob. Planet. Change 80–81, 99–112 (2012).
Behrendt, J. et al. Patterns of late Cenozoic volcanic and tectonic activity in the West Antarctic rift system revealed by aeromagnetic surveys. Tectonics 15, 660–676 (1996).
Curewitz, D. & Karson, J. A. Structural settings of hydrothermal outflow: fracture permeability maintained by fault propagation and interaction. J. Volc. Geotherm. Res. 79, 149–168 (1997).
Faulds, J. E., & Varga, R. J. The role of accommodation zones and transfer zones in the regional segmentation of extended terranes: in, Accommodation zones and transfer zones. The regional segmentation of the Basin and Range province. ed. by Faulds, J. E., & J. H. Stewart. Geol. Soc. of Amer. Spec. Pap. 323, 1–46 (1998).
Martin, A., Cooper, A. F., Price, R., Kyle, P., & Gamble, J. Erebus Volcanic Province II. Petrology. In: J. L. Smellie, K. S. Panter, A. Geyer (Eds.), Volcanism in Antarctica: 200 Million Years of Subduction, Rifting and Continental Break-Up. Geol. Soc. Lon. Mem. 55, 447-489 (2021).
Esser, R. P., Kyle, P. R. & McIntosh, W. C. 40Ar/39Ar dating of the eruptive history of Mount Erebus, Antarctica: volcano evolution. Bull. Volc. 66, 671–686 (2004).
Parmelee, D. E. F., Kyle, P. R., Kurz, M. D., Marrero, S. M. & Phillips, F. M. A new Holocene eruptive history of Erebus volcano, Antarctica using cosmogenic 3He and 36Cl exposure ages. Quat. Geochronol. 30, 114–131 (2015).
Chaput, J., Zandomeneghi, Z., Aster, R. C., Knox, H. & Kyle, P. R. Imaging of Erebus volcano using body wave seismic interferometry of Strombolian eruption coda. Geophys. Res. Lett. 39, L07304 (2012).
Zandomeneghi, D. et al. Internal structure of Erebus volcano, Antarctica imaged by high-resolution active-source seismic tomography and coda interferometry. J. Geophys. Res. 118, 1067–1078 (2013).
Blondel, T., Chaput, J., Derode, A., Campillo, M. & Aubry, A. Matrix approach of seismic imaging: application to the Erebus volcano, Antarctica. J. Geophys. Res. 123, 10936–10950 (2018).
Knox, H. A., Chaput, J. A., Aster, R. C. & Kyle, P. R. Multiyear shallow conduit changes observed with lava lake eruption seismograms at Erebus volcano, Antarctica. J. Geophys. Res. 123, 3178–3196 (2018).
Lawrence, J. F. et al. Crust and upper mantle structure of the Transantarctic Mountains and surrounding regions from receiver functions surface waves, and gravity: implications for uplift models. Geochem. Geophys. Geosys 7, Q10011 (2006).
Finotello, M., Nyblade, A., Julia, J., Wiens, D. & Anandakrishnan, S. Crustal Vp–Vs ratios and thickness for Ross Island and the Transantarctic Mountain front, Antarctica. Geophys. J. Int. 185, 85–92 (2011).
Brenn, G., Hansen, S. & Park, Y. Variable thermal loading and flexural uplift along the Transantarctic Mountains, Antarctica. Geology 45, 463–466 (2017).
Hill, G. J. On the use of electromagnetics for earth imaging of the polar regions. Surv. Geophys. 41, 5–45 (2020).
Wannamaker, P. et al. Uplift of the central transantarctic mountains. Nat. Commun. 8, 1–11 (2017).
Caldwell, T. G., Bibby, H. M. & Brown, C. The magnetotelluric phase tensor. Geophys. J. Int 158, 457–469 (2004).
Bibby, H. M., Caldwell, T. G. & Brown, C. Determinable and non-determinable parameters of galvanic distortion in magnetotellurics. Geophys. J. Int 163, 915–930 (2005).
Booker, J. R. The magnetotelluric phase tensor: a critical review. Surv. Geophys. 35, 7–40 (2014).
Hill, G. J. et al. Distribution of melt beneath Mount St Helens and Mount Adams inferred from magnetotelluric data. Nat. Geosci. 2, 785–789 (2009).
Kordy, M., Wannamaker, P., Maris, V., Cherkaev, E. & Hill, G. 3-D magnetotelluric inversion including topography using deformed hexahedral edge finite elements and direct solvers parallelized on SMP computers - Part I: Forward problem and parameter Jacobians. Geophys. J. Int. 204, 74–93 (2016).
Yoshino, T. & Katsura, T. Electrical conductivity of mantle minerals: role of water in conductivity anomalies. Annu. Rev. Earth Planet. Sci. 41, 605–628 (2013).
Filloux, J. H. Instrumentation and experimental methods for oceanic studies. In Geomagnetism, Vol. 1 (ed. Jacobs, J. A.) 143–248 (Academic Press, 1987).
Kordy, M., Wannamaker, P., Maris, V., Cherkaev, E. & Hill, G. 3-dimensional magnetotelluric inversion including topography using deformed hexahedral edge finite elements and direct solvers parallelized on symmetric multiprocessor computers—part II: direct data-space inverse solution. Geophys. J. Int 204, 94–110 (2016).
LeMasurier, W. E. Neogene extension and basin deepening in the West Antarctic rift inferred from comparisons with the East African rift and other analogs. Geology 36, 247–250 (2008).
Moore, J. et al. The evolution of volcano-hosted geothermal systems based on deep wells from Karaha-Telaga Bodas, Indonesia. Am. J. Sci. 308, 1–48 (2008).
Ogawa, Y., Ichiki, M., Kanda, W., Mishina, M., & Asamori, K. Three-dimensional magnetotelluric imaging of crustal fluids and seismicity around Naruko volcano, NE Japan. Earth Planets Space 66, https://doi.org/10.1186/s40623-014-0158-y (2014).
Hill, G. J. et al. Structure of the Tongariro Volcanic system: insights from magnetotelluric imaging. Earth Planet. Sci. Lett. 432, 115–125 (2015).
Press, W., Teukolsky, A., Vetterling, T. & Flannery, P. Numerical Recipes in Fortran 77: The Art of Scientific Computing. 1003 (University of Cambridge Press, 1992).
Pommier, A. & Roberts, J. Understanding electrical signals from below Earth’s surface. EOS 99, https://doi.org/10.1029/2018EO108517 (2018).
Pommier, A., Gaillard, F., Pichavant, M. & Scaillet, B. Laboratory measurements of electrical conductivities of hydrous and dry Mount Vesuvius melts under pressure. J. Geophys. Res. 113, B05205 (2008).
Manning, C. E. Fluids of the lower crust: deep is different. Annu. Rev. Earth Planet. Sci. 46, 67–97 (2018).
Sibson, R. H. Au-quartz mineralization near the base of the continental seismogenic zone. Geol. Soc. Lon. Spec. Publ. 272, 519 LP–519532 (2007).
Sibson, R. H. Earthquake rupturing in fluid-overpressured crust: how common? Pure Appl. Geophys. 171, 2867–2885 (2014).
Wannamaker, P. E. et al. Fluid and deformation regime of an advancing subduction system at Marlborough, New Zealand. Nature 460, 733–736 (2009).
Rowe, C. A., Aster, R. C., Kyle, P. R., Dibble, R. R. & Schlue, J. W. Seismic and acoustic observations at Mount Erebus Volcano, Ross Island, Antarctica, 1994–1998. J. Volc. Geotherm. Res. 101, 105–128 (2000).
Plank, T. & Manning, C. E. Subducting carbon. Nature 574, 343–352 (2019).
Panter, K. S. et al. Melt origin across a rifted continental margin: a case for subduction-related metasomatic agents in the lithospheric source of alkaline basalt, NW Ross Sea, Antarctica. J. Petrol. 59, 517–558 (2018).
Phillips, E. H. et al. The nature and evolution of mantle upwelling at Ross Island, Antarctica, with implications for the source of HIMU lavas. Earth Planet. Sci. Lett. 498, 38–53 (2018).
Ingham, M. R. et al. A magnetotelluric study of Mount Ruapehu volcano, New Zealand. Geophys. J. Int 179, 887–904 (2009).
Bedrosian, P. A., Peacock, J. R., Bowles-Martinez, E., Schultz, A. & Hill, G. J. Crustal inheritance and a top-down control on arc magmatism at Mount St Helens. Nat. Geosci. 11, 865–870 (2018).
Hill, G. J. et al. Temporal magnetotellurics reveals mechanics of the 2012 Mount Tongariro, NZ, Eruption. Geophys. Res. Lett. 47, https://doi.org/10.1029/2019GL086429 (2020).
Ichiki, M. et al. Magma reservoir beneath Azumayama Volcano, NE Japan, as inferred from a three-dimensional electrical resistivity model explored by means of magnetotelluric method. Earth, Planets Space 73, 30 (2021).
Rowlands, D. P., White, R. S. & Haines, A. J. Seismic tomography of the Tongariro Volcanic Centre, New Zealand. Geophys. J. Int. 163, 1180–1194 (2005).
Koulakov, I. & Shapiro, N. Seismic tomography of volcanoes. Encycl. Earthq. Eng. https://doi.org/10.1007/978-3-642-36197-5_51-1 (2015).
Kiser, E. et al. Magma reservoirs from the upper crust to the Moho inferred from high-resolution Vp and Vs models beneath Mount St. Helens, Washington State, USA. Geology 44, 411–414 (2016).
Ulberg, C. W. et al. Local Source Vp and Vs tomography in the Mount St. Helens region with the iMUSH Broadband Array. Geochem. Geophys. Geosys. 21, https://doi.org/10.1029/2019GC008888 (2020).
Plank, T., Kelley, K. A., Zimmer, M. M., Hauri, E. H. & Wallace, P. J. Why do mafic arc magmas contain ~4 wt% water on average? Earth Planet. Sci. Lett. 364, 168–179 (2013).
Rasmusesen, D. J., Plank, T. A., Roman, D. C. & Zimmer, M. M. Magmatic water content controls the pre-eruptive depth of arc magmas. Science 375, 1169–1172 (2022).
Huber, C., Townsend, M., Degruyter, W. & Bachmann, O. Optimal depth of subvolcanic magma chamber growth controlled by volatiles and crust rheology. Nat. Geosci. https://doi.org/10.1038/s41561-019-0415-6 (2019).
Chave, A. D. & Jones, A. G. The Magnetotelluric Method: Theory and Practice (Cambridge University Press, 2012).
Worzewski, T., Jegen, M., Kopp, H., Brasse, H. & Castillo, W. T. Magnetotelluric image of the fluid cycle in the Costa Rican subduction zone. Nat. Geosci. 4, 108–111 (2011).
Wannamaker, P. E. et al. Segmentation of plate coupling, fate of subduction fluids, and modes of arc magmatism in Cascadia, inferred from magnetotelluric resistivity. Geochem. Geophys. Geosys. 15, https://doi.org/10.1002/2014G204 (2014).
Wannamaker, P. E., Stodt, J. A. & Olsen, S. L. Dormant state of rifting below the Byrd Subglacial Basin, West Antarctica, implied by magnetotelluric (MT) profiling. Geophys. Res. Lett. 23, 2983–2986 (1996).
Wannamaker, P. E., Stodt, J. A., Olsen, S. L., Pellerin, L. & Hall, D. Structure and thermal regime beneath the South Pole region, East Antarctica, from magnetotelluric measurements. Geophys. J. Int. 157, 36–54 (2004).
Peacock, J. R. & Selway, K. Magnetotelluric investigation of the Vestfold Hills and Rauer Group, East Antarctica. J. Geophys. Res. 121, https://doi.org/10.1002/2015JB012677 (2016).
Wannamaker, P. E., Stodt, J. A., Hill, G. J., Maris V. & Kordy, M. A. Thermal regime and state of hydration of the Antarctic upper mantle from regional-scale electrical properties. Geol. Soc. Lon. Mem. 56, 14 https://doi.org/10.1144/M56-2020-4 (2021).
Acknowledgements
Logistical support was provided by Antarctic New Zealand and the United States Antarctic Program including flight support from Southern Lakes Helicopters—S. Clarke, M. Deaker, M. Hayes, A. Hefford, J. Laing, S. Mullally; and Petroleum Helicopters Inc.—H. Blake, K. Cox, S. Firth, J. Heaslet, M. Jansen, J. Radford, R. Skoreki, & B. Wilson. Mountaineering support from T. Arnold, P. Biskind, R. Bottomley, A. Christophers, R. Hunter, M. Kingsbury, & B. Nicholson; and field assistance from K. Allen, E. Buys, M. Cloutier, K. Grenfell, B. Goodsell, A. Hindle, C. Lodge, & S. Parker is appreciated. Base maps and digital elevation models were provided by M. Cloutier at the Polar Geospatial Center, University of Minnesota. Discussions with S. Bannister and H. Bibby of GNS Science improved the clarity of the manuscript. Alternate color map versions of Figs. 2–4 are provided as Supplementary Figs. S24–S26. The authors suggest the use of the Visolve (https://www.ryobi.co.jp/products/visolve/en/) online utility by readers interested in alternate color scales for other figures. Any use of trade, firm, or product names is for descriptive purposes and does not imply endorsement by the U.S. Government. New Zealand Royal Society Marsden award: ASL-1301 to G.H. Lumina Quaeruntur Fellowship: LQ100121901 to G.H. US National Science Foundation Office of Polar Programs award: AES-1443522 to P.W. US Department of Energy Geothermal Technologies Office contract: DE-EE0002750 to P.W. Natural Science and Engineering Research Council Discovery Grant to M.U. US National Science Foundation Office of Polar Programs awards ANT1141534, PLR1644234 to P.K.
Author information
Authors and Affiliations
Contributions
G.H. and P.W. designed the research program with assistance from P.K. G.H., P.W., V.M., J.S., M.K., M.U., P.B., E.W., and D.U. conducted the data collection. D.U. and G.H. developed the field operations and safety plan. G.H. carried out the time series and phase-tensor analysis. V.M., P.W., and M.K. computed the inverse models. G.H., V.M., and P.W. constructed the figures. J.S. designed and built the electric field measurement buffer amplifiers. G.H. and P.W. wrote the initial draft. All authors contributed to the interpretation and preparation of the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Richard Aster, Juanjo Ledo and Samer Naif for their contribution to the peer review of this work. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Hill, G.J., Wannamaker, P.E., Maris, V. et al. Trans-crustal structural control of CO2-rich extensional magmatic systems revealed at Mount Erebus Antarctica. Nat Commun 13, 2989 (2022). https://doi.org/10.1038/s41467-022-30627-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-022-30627-7
- Springer Nature Limited