Abstract
Femtosecond modelocked lasers with multi-gigahertz pulse repetition rates are attractive sources for all applications that require individually resolvable frequency comb lines or high sampling rates. However, the modelocked laser architectures demonstrated so far have several issues, including the need for single-mode pump lasers, limited output power, Q-switching instabilities and challenging cavity geometries. Here, we introduce a technique that solves these issues. In a two-dimensionally patterned quasi-phase-matching (QPM) device, we create a large, low-loss self-defocusing nonlinearity, which simultaneously provides SESAM-assisted soliton modelocking in the normal dispersion regime and suppresses Q-switching induced damage. We demonstrate femtosecond passive modelocking at 10-GHz pulse repetition rates from a simple straight laser cavity, directly pumped by a low-cost highly spatially multimode pump diode. The 10.6-GHz Yb:CaGdAlO4 (Yb:CALGO) laser delivers 166-fs pulses at 1.2 W of average output power. This enables a new class of femtosecond modelocked diode-pumped solid-state lasers with repetition rates at 10 GHz and beyond.
Similar content being viewed by others
Introduction
The advancement of passively modelocked solid-state lasers has provided the basis for the development of reliable low-noise frequency combs, which have nowadays become important tools for a large variety of metrology and spectroscopy applications. Frequency combs with line spacings above 10 GHz are powerful tools for spectroscopy with resolved comb lines1, the calibration of astronomical spectrographs2,3,4, arbitrary waveform generation5, terabit optical transmission systems6 and other applications that require easy access to the individual comb lines. Dual-combs in the gigahertz regime for spectroscopic applications with fast acquisition times have recently attracted the attention of the scientific community7,8,9,10. Furthermore, the ultrastable pulse train in the time domain can be used for low-noise microwave photonics11 and emerging optical computation systems based on coupled degenerate optical parametric oscillators12,13,14. Recently, pulse trains with multi-gigahertz repetition rates have also been used to generate dense pulse bursts that allowed micro-machining experiments to be performed in the ablation-cooled regime15.
To date, there are several approaches for generating frequency combs with large comb-line spacings such as electro-optic (EO) combs16,17,18, microresonator combs19, 20, Kerr lens modelocked (KLM) solid-state lasers21, 22 or comb-line filtering of e.g. modelocked fibre lasers in the few-hundred MHz-regime. There are different benefits and trade-offs for these techniques. Parametric comb generation using electro-optical modulators or microresonators offers a way to easily produce combs with >10 GHz line spacings. However, the formation of stable high-power femtosecond pulses is less straight-forward than with modelocked lasers23. EO combs, for example, require a series of nonlinear broadening and laser amplification stages, while microresonator combs require locking of a high-coherence parametric pump laser (single-spatial mode and single-optical frequency) to a high-Q resonator. On the other hand, in modelocked lasers the pulse train in the time domain and the spectral comb structure are instrinsically linked via Fourier transformation, and the intense output pulses are well suited to subsequent nonlinear frequency conversion. KLM modelocked solid-state lasers at 10-GHz or 15-GHz pulse repetition rates provide high-quality frequency combs, but the relatively low intracavity pulse energy at these high pulse repetition rates makes it more difficult to support KLM. The very tight focusing of the pump and laser beam required to initiate KLM via the gain medium requires an excellent pump beam quality (typically M2 ≈ 1)21, 22. Moreover, modelocking has to be initiated at the edge of the cavity stability region. As an alternative to GHz KLM lasers, a robust fibre-based oscillator with a repetition rate of a few 100 MHz and filtering the comb lines using Fabry–Pérot cavitites has also been sucessfully demonstrated as a way to reach comb-line spacings in the multi-gigahertz regime24. The complexity of such a system can however rapidly increase depending on the number of external cavities that need to be locked to achieve sufficient supression of the unwanted intermediate comb lines.
Semiconductor saturable absorber mirrors (SESAMs)25 enable robust stable passive soliton modelocking without any critical cavity stability criteria26. However, at multi-gigahertz repetition rates, Q-switching instabilities are a principal concern27. The high peak powers that occur during Q-switching instabilities damage the intracavity components before achieving sufficient power to exceed the threshold for stable continuous wave (cw) modelocking. To avoid these issues, V-shaped and Z-shaped cavities have been designed with properly placed curved mirrors to avoid focusing on critical cavity elements28. However, scaling these methods to the 10-GHz-regime has been elusive, since the small cavity size demands multi-functional optical components and severely limits their spatial arrangement.
A straight-cavity design with the SESAM as one of the end mirrors strongly relaxes those alignment constraints, but self-focusing of the beam and hence damage will occur in the cavity when operating in the conventional soliton modelocking regime. In this article, we introduce a new class of ultrafast lasers based on a simple straight cavity which solves the problems described above.
Results
Self-defocusing straight-cavity design
Instead of relying on the intrinsic (weak) nonlinearity of the gain medium and negative dispersion compensating elements (conventional soliton modelocking regime, Fig. 1a), we engineer a device with a nonlinear refractive index (n2,eff) that is large and negative in sign, thus enabling femtosecond soliton modelocking at very low intracavity pulse energies and with net positive material dispersion (Fig. 1b).
Simultaneously, the negative n2,eff implies a dynamic self-defocusing lens which suppresses damage: if an energetic pulse builds up due to Q-switching instabilities, the beam experiences strong self-defocusing, thus keeping the intensity below the damage threshold of the intracavity components.
A compelling approach to obtain such a tuneable self-defocusing nonlinearity is via the cascading of quadratic nonlinearities (CQN)29. In CQN, a second-harmonic generation (SHG) crystal is used to generate a second-harmonic wave, which subsequently acts back upon the fundamental wave, thereby simulating a Kerr-like nonlinearity with an effective nonlinear refractive index n2,eff. Varying the phase-mismatch of the SHG process allows the sign and magnitude of n2,eff to be engineered, which has enabled soliton modelocking in the normal dispersion regime30,31,32,33,34,35. A potential drawback of the CQN technique are the losses associated to residual SHG. The losses one obtains using conventional CQN, e.g. in birefringent crystals, can easily exceed 0.5%34 which is intolerable for a SESAM-modelocked laser in the multi-gigahertz regime. The solution comes in the form of quasi-phase matching (QPM) materials: lithographic patterning of such materials now allows us to engineer a large, self-defocusing nonlinearity that is adiabatically excited via a non-uniform QPM structure in order to suppress the SHG losses by more than an order of magnitude (Methods). The device used here consists of a 2-mm-long periodically poled lithium niobate crystal (PPLN) that is two-dimensionally patterned (Fig. 2). In earlier work33, we have presented the operating principles of this type of device, whose functionality has now for the first time been leveraged to enable a new type of multi-gigahertz all-self-defocusing straight cavity.
Values for the effective nonlinear index n2,eff ranging from −1 × 10−18 to −7 × 10−18 m2W−1 can be achieved in this PPLN device, which is approximately two orders of magnitude higher than the intrinsic third-order material nonlinearities of conventional wide band-gap materials. For example, the nonlinear index of the gain material Yb:CALGO36 amounts only to n2,intrinsicCALGO ≈ + 8 × 10−20 m2W−1. The best modelocking results (presented in Figs. 3 and 4) were obtained at transverse position 2, indicated in Fig. 2a. This position corresponds to a grating vector Kg = 889 mm−1, leading to a phase mismatch of 44.9 mm−1 at 1052 nm. The net total intracavity GDD amounts to ≈ + 1280 fs2 per roundtrip (material dispersion of the 2-mm-long PPLN and the 1.5-mm-long Yb:CALGO crystal, the SESAM was measured to have a reasonably flat GDD profile with a negligible contribution of −66 fs2 at 1050 nm).
Modelocking results
The lasing operation can be divided into two regions: at low pump power, mode-beating and Q-switching instabilities are observed. When increasing the pump power further, the laser reliably transitions into self-starting soliton modelocking at around 734 mW average output power (Fig. 4a) initiated and stabilized by the SESAM. Stable cw modelocking with a TEM00 beam profile and an M2 = 1.01 (measured with the Thorlabs BP104-IR beam profiler) is maintained up to an average power of 1.2 W. At this power, the laser can be operated for several hours a day without noticeable degradation of the modelocking parameters and repeatable performance over several months has been observed. A frequency-dependent amplitude noise measurement is shown in Supplementary Fig. 1 (and discussed in Supplementary Note 1). If the pump power is further increased, higher order spatial modes start to lase, which become visible in the laser beam profile and appear as sidepeaks in the radio-frequency trace. The onset of higher order modes can be explained by the strong beam divergence of the multimode pump within the length of the gain medium, which allows for non-TEM00-modes to experience sufficient gain above a certain pump power. Using a pump with a lower M2-value and/or a shorter gain crystal would mitigate this effect. Over this range, the duration of the transform-limited pulses decreases from 227 to 166 fs, consistent with the prediction of soliton modelocking, and the centre wavelength shifts from 1052 to 1050 nm. Shorter pulse durations could be achieved by decreasing the net positive intracavity dispersion, i.e. by using a Gires–Tournois interferometer-type coating on the output coupler.
Laser cavity dynamics
To understand the threshold for cw modelocking, the influence of soliton shaping and gain filtering, as well as the role of the PPLN device on the Q-switching threshold has been quantified using numerical simulations (Fig. 4b). These results show that the PPLN device helps to reduce the Q-switching threshold (Methods).
However, a low Q-switching threshold alone is not sufficient to guarantee successful modelocking. Damage may still occur due to Q-switching instabilities that inevitably build up inside the cavity while ramping up the pump power. By exploiting dynamical self-defocusing effects, we are able to suppress damage while transitioning through this regime. In Fig. 5a we show the mode radius on all the cavity elements as a function of the negative Kerr lens, which is induced in the PPLN device. The Kerr lens power F can be expressed as a function of the pulse energy Ep, the corresponding soliton pulse duration τFWHM, the mode radius in the PPLN wPPLN and the length of the PPLN crystal LPPLN37:
This defocusing lens depends on n2,eff (Fig. 5b), and thus on the position of the PPLN as described in Fig. 2. As a result of this dynamic defocusing Kerr lens, the fluence on the SESAM does not increase linearly anymore, but instead shows a clamping behaviour as the mode size increases (Fig. 5c). Moreover, the laser mode size in the gain crystal also increases with stronger Kerr lensing in the PPLN, and hence for a fixed pump power and pump mode size, the gain will eventually drop below unity at a certain pulse energy (Fig. 5d). Based on this energy, we estimate the maximum fluence that may occur during Q-switching (yellow crosses in Fig. 5). For the experimental modelocking parameters (PPLN at position 2) and for a pump power corresponding to the Q-switching threshold, we obtain an upper limit of ~40 nJ, beyond which the pulse energy is clamped (the same calculation was performed to obtain the clamping points in Fig. 5c for the other values of n2,eff). Next we evaluate the response of the SESAM. The AlAs-embedded single-InGaAs-quantum well SESAM used has a saturation fluence of Fsat ≈ 8 µJ cm−2, a modulation depth ΔR ≈ 1%, non-saturable losses ≈ 0.12% and an inverse saturable absorption coefficient F2 ≈ 500 mJ cm−2. These parameters were extracted from fitting the SESAM reflectivity curve for a Gaussian beam38 to the reflectivity values measured at a fixed 170-fs pulse duration and constant spot size on the SESAM. To mimic the real response of the SESAM inside the 10-GHz cavity, we need to incorporate the change in mode size due to the PPLN Kerr lens for each energy point. Additionally, since the pulse duration of the soliton decreases with energy, the pulse duration-dependent F2 coefficient39 needs to be scaled for each energy value as well. This leads to the effective intracavity SESAM reflectivity curve shown in Fig. 5e. This curve shows how the lens effect prevents operation too far into the rollover of the reflectivity, which in turn prevents strong absorption in the SESAM and thus potential damage.
Discussion
In conclusion, by combining SESAM modelocking with adiabatic excitation of cascaded quadratic nonlinearities, we overcome the issues faced by conventional femtosecond modelocked lasers that have strongly limited access to 10-GHz repetition rates until now. We demonstrated a straight-cavity 10-GHz SESAM-modelocked laser that operates in the positive GDD regime. The intracavity multi-functional 2D-QPM PPLN crystal shapes the pulses in time by providing negative SPM for soliton formation while minimizing the intracavity loss, and simultaneously acts as a dynamic self-defocusing lens, which protects the cavity elements from Q-switching related damage. Combining these effects allowed us to achieve for the first time femtosecond Watt-level fundamental modelocking of a diode-pumped solid-state laser with a repetition rate above 10 GHz. The SESAM as well as the PPLN device are fabricated on a wafer scale, with the custom QPM pattern on the latter defined by a lithographic mask. The pulsed nature of this 1-µm laser source makes it well suited to various frequency conversion techniques with novel nonlinear platforms, such as low-energy supercontinuum generation in silicon nitride waveguides40 or high-gain optical parametric amplification41 to reach the mid-infrared spectral region. The modelocking technique based on self-defocusing nonlinearities can furthermore be deployed at other wavelengths and is expected to be especially favourable at longer wavelengths due to the reduced group velocity mismatch between the fundamental and the second harmonic in the PPLN crystal. The new class of ultrafast lasers enabled by this technique represents an important step towards compact high-power optical frequency combs beyond 10-GHz.
Methods
Laser cavity details
The 1.5-mm-long Yb:CALGO gain crystal is pumped by an internally wavelength-stabilized, spatially multimode diode (Lissotschenko Mikrooptik GmbH, M2 ≈ 36) capable of providing up to 60 W at 980 nm. The pump beam is focused through a 12-mm-radius pump-transparent mirror that acts as a 2.8% output coupler for the 1050 nm laser centre wavelength. In order to minimize the thermal load inside the laser cavity, the vertically polarized pump light, which would only be weakly absorbed in the gain crystal, is removed using a polarizing beam splitter. The beam splitter at the same time allows the vertically polarized laser beam to exit.
PPLN device operating principle
The principle behind the self-defocusing nonlinearity is phase-mismatched SHG, often referred to as CQN. Far from phase-matching, the fundamental experiences an effective third-order nonlinear response that can be expressed as a nonlinear index contribution n2,CQN tunable via the phase-mismatch ∆k. Adding it to the intrinsic material nonlinear index n2,intr, yields the total effective nonlinear index n2,eff:
(λF: wavelength of the fundamental, nF/SH: linear refractive index at the fundamental/second harmonic, deff: effective nonlinear coefficient).
In our PPLN device, the QPM periods vary transversely across the chip. By translating this 2D-QPM PPLN device with respect to the incident laser beam, a tunable phase mismatch \(\Delta k(x) = k_{{\mathrm{SH}}} - 2k_{\mathrm{F}} - K_{\mathrm{g}}(x)\) can be obtained, where \(k_{{\mathrm{F/SH}}} = 2\pi n_{{\mathrm{F/SH}}}/\lambda _{{\mathrm{F/SH}}}\) denotes the wave vector of the fundamental wave (F) and its second harmonic (SH) respectively.
In order to obtain the largest magnitude of n2,eff, the phase mismatch Δk has to be made as small possible within the validity of the CQN regime. However, in a normal CQN device, the fraction of power lost to SHG increases according to \(\alpha \sim 1/(\Delta k)^2\). Such losses resemble an inverse saturable absorption in the laser, limiting the nonlinearity available before modelocked operation is destabilized. This issue is especially critical at high repetition rates, where large nonlinearities are required due to the low intracavity pulse energy.
We have developed a new technique to suppress these losses: adiabatic excitation of quadratic solitons33. In this technique, the QPM period is rapidly but smoothly moved far from phase-matching at the input and output sides of the device. In this way, the second-harmonic light, which mediates the large effective nonlinear refractive index, is adiabatically switched “on” via the input segment, is large in the middle segment (leading to a large and negative n2,eff in that segment), and is switched “off” via the output segment, as illustrated in Fig. 2 of the main text. With this technique, the resulting nonlinear losses can be decreased by an order of magnitude or more compared to a non-apodized device33. The nonlinear chirp QPM profiles used are analogous to apodization in chirped QPM devices42, 43, where they efficiently excite adiabatic three-wave mixing processes44.
PPLN operating point
In our PPLN device, the value of the grating k-vector Kg in the interaction region (as indicated in Fig. 2a) varies continuously across the transverse position in the device (i.e. perpendicular to the beam propagation direction). This value varies from 854 to 934 mm−1 across the transverse profile of the device. The three example operating points depicted in Fig. 2a and the corresponding values of n2,eff in Fig. 2b illustrate the trade-offs involved in optimizing modelocking performance. When operating closer to position (1) (large phase-mismatch, Kg = 854 mm−1), the self-defocusing lens effect becomes too weak and Q-switching damage can be observed (Fig. 5c). When moving towards a too-small phase mismatch (position (3), Kg = 910 mm−1), the nonlinear losses increase and are accompanied by a self frequency shift effect45. These effects cause the laser to react by shifting to a shorter centre wavelength, which however at the same time moves the pulse away from the spectral region with highest gain in the Yb:CALGO crystal. Optimum modelocking performance was obtained between these extrema, with the PPLN device placed in position (2) (Kg = 889 mm−1).
Numerical prediction of the Q-switching threshold
In a general sense, stable cw modelocking can be characterized as a state where small deviations around the steady-state gain gs and pulse energy Es will be damped by the system, instead of being amplified as it is the case for Q-switching instabilities. Mathematically, these linearized equations for pulse energy E and gain g can be expressed in vector form46,
where TR denotes the cavity round-trip time, Esat,L the saturation energy of the laser gain medium, τL is the upper-state lifetime of the gain medium (420 µs for Yb:CALGO36) and G corresponds to the total gain (sum of all cavity gain and loss terms), which is zero for the steady state. For stability, the trace of this matrix needs to be negative46. The Q-switching threshold can thus be defined as the pulse energy Eth for which trace(A) = 0. In cases where the only saturable losses arise from the SESAM, gain filtering is neglected and the laser is operating many times above threshold, i.e. \((E\tau _{\mathrm{L}})/(E_{{\mathrm{L,sat}}}T_{\mathrm{R}}) > > 1\), the Q-switching threshold condition above leads to the following (often cited) simplified equation39:
(Esat,A: saturation energy of the SESAM, AA: beam area on SESAM, F2: inverse saturable absorption coefficient, ΔR: modulation depth). Evaluating this expression for the parameters of this 10-GHz laser yields a predicted intracavity pulse energy threshold of 9.9 nJ, corresponding to an average output power of 2.9 W (red dashed line in Fig. 4), which is about 4 times higher than we experimentally observe. Although Eq. 4 may be convenient to use, it does not provide the full picture.
We have developed a complete calculation of trace(A) in the steady-state for quasi-three-level modelocked lasers. We include soliton shaping, gain filtering using directly measured cross section data for Yb:CALGO47, as well as the exact SESAM and PPLN responses, accounting for the transverse beam profile of the laser and pump beams in each intracavity component (a flat-top pump beam is assumed for simplicity).
Neglecting the PPLN crystal losses, this precise calculation already reduces the predicted threshold to an average power of ~900 mW. To further improve the accuracy, the total gain G needs to contain the residual nonlinear SHG losses in the PPLN crystal, which are analogous to inverse saturable absorption effects. Although the nonlinear losses are minimized by QPM design as described above, we need to assume random duty cycle (RDC) errors due to imperfect fabrication48. Assuming a realistic QPM period jitter of 0.2 µm increases the nonlinear losses from ideally 0.01 to 0.05%. Including these RDC errors, the predicted Q-switching threshold output power drops to 724 mW, which is in very good agreement with the experimentally observed threshold.
Data availability
The data and simulations codes that support the findings of this study are available from the corresponding authors upon request.
Change history
11 April 2018
The original version of this Article contained an error in Fig. 3a, in which the delay axis was incorrectly labeled in increments of 0.5 ps instead of the correct 0.2 ps. This has been corrected in both the PDF and HTML versions of the Article.
References
Diddams, S. A., Hollberg, L. & Mbele, V. Molecular fingerprinting with the resolved modes of a femtosecond laser frequency comb. Nature 445, 627–630 (2007).
Steinmetz, T. et al. Laser frequency combs for astronomical observations. Science 321, 1335–1337 (2008).
Yi, X. et al. Demonstration of a near-IR line-referenced electro-optical laser frequency comb for precision radial velocity measurements in astronomy. Nat. Commun. 7, 10436 (2016).
McCracken, R. A., Charsley, J. M. & Reid, D. T. A decade of astrocombs: recent advances in frequency combs for astronomy [Invited]. Opt. Express 25, 15058–15078 (2017).
Cundiff, S. T. & Weiner, A. M. Optical arbitrary waveform generation. Nat. Photon. 4, 760–766 (2010).
Hillerkuss, D. et al. 26 Tbit s−1 line-rate super-channel transmission utilizing all-optical fast Fourier transform processing. Nat. Photon. 5, 364–371 (2011).
Villares, G., Hugi, A., Blaser, S. & Faist, J. Dual-comb spectroscopy based on quantum-cascade-laser frequency combs. Nat. Commun. 5, 5192 (2014).
Coddington, I., Newbury, N. & Swann, W. Dual-comb spectroscopy. Optica 3, 414–426 (2016).
Link, S. M., Maas, D. J. H. C., Waldburger, D. & Keller, U. Dual-comb spectroscopy of water vapor with a free-running semiconductor disk laser. Science 356, 1164–1168 (2017).
Ideguchi, T. et al. Coherent Raman spectro-imaging with laser frequency combs. Nature 502, 355–359 (2013).
Fortier, T. M. et al. Generation of ultrastable microwaves via optical frequency division. Nat. Photon. 5, 5 (2011).
McMahon P. L. et al. A fully-programmable 100-spin coherent Ising machine with all-to-all connections. Science 354, 614–617 (2016).
Inagaki, T. et al. A coherent Ising machine for 2000-node optimization problems. Science 354, 603–606 (2016).
Marandi, A., Wang, Z., Takata, K., Byer, R. L. & Yamamoto, Y. Network of time-multiplexed optical parametric oscillators as a coherent Ising machine. Nat. Photon. 8, 937–942 (2014).
Kerse, C. et al. Ablation-cooled material removal with ultrafast bursts of pulses. Nature 537, 84–88 (2016).
Kourogi, M., Nakagawa, K. & Ohtsu, M. Wide-span optical frequency comb generator for accurate optical frequency difference measurement. IEEE J. Qantum Electron. 29, 2693–2701 (1993).
Ishizawa, A. et al. Phase-noise characteristics of a 25-GHz-spaced optical frequency comb based on a phase- and intensity-modulated laser. Opt. Express. 21, 29186–29194 (2013).
Beha, K. et al. Electronic synthesis of light. Optica 4, 406–411 (2017).
Del’Haye, P. et al. Optical frequency comb generation from a monolithic microresonator. Nature 450, 1214–1217 (2007).
Kippenberg, T. J., Holzwarth, R. & Diddams, S. A. Microresonator-based optical frequency combs. Science 332, 555–559 (2011).
Bartels, A., Heinecke, D. & Diddams, S. A. Passively mode-locked 10 GHz femtosecond Ti:sapphire laser. Opt. Lett. 33, 1905–1907 (2008).
Endo, M., Ito, I. & Kobayashi, Y. Direct 15-GHz mode-spacing optical frequency comb with a Kerr-lens mode-locked Yb:Y2O3 ceramic laser. Opt. Express. 23, 1276–1282 (2015).
Herr, T. et al. Temporal solitons in optical microresonators. Nat. Photon. 8, 145–152 (2014).
Steinmetz, T. et al. Fabry–Pérot filter cavities for wide-spaced frequency combs with large spectral bandwidth. Appl. Phys. B. 96, 251–256 (2009).
Keller, U. et al. Semiconductor saturable absorber mirrors (SESAMs) for femtosecond to nanosecond pulse generation in solid-state lasers. IEEE J. Sel. Topics Quantum Electron. 2, 435–453 (1996).
Kärtner, F. X., Jung, I. D. & Keller, U. Soliton mode-locking with saturable absorbers. IEEE J. Sel. Topics Quantum Electron. 2, 540–556 (1996).
Hönninger, C., Paschotta, R., Morier-Genoud, F., Moser, M. & Keller, U. Q-switching stability limits of continuous-wave passive mode locking. J. Opt. Soc. Am. B 16, 46–56 (1999).
Klenner, A. & Keller, U. All-optical Q-switching limiter for high-power gigahertz modelocked diode-pumped solid-state lasers. Opt. Express 23, 8532–8544 (2015).
Stegeman, G. I., Hagan, D. J. & Torner, L. χ(2) cascading phenomena and their applications to all-optical signal processing, mode-locking, pulse compression and solitons. Opt. Quant. Electron. 28, 1691–1740 (1996).
Cerullo, G., De Silvestri, S., Monguzzi, A., Segala, D. & Magni, V. Self-starting mode locking of a cw Nd:YAG laser using cascaded second-order nonlinearities. Opt. Lett. 20, 746–748 (1995).
Qian, L. J., Liu, X. & Wise, F. W. Femtosecond Kerr-lens mode locking with negative nonlinear phase shifts. Opt. Lett. 24, 166–168 (1999).
Holmgren, S. J., Pasiskevicius, V. & Laurell, F. Generation of 2.8 ps pulses by mode-locking a Nd:GdVO4 laser with defocusing cascaded Kerr lensing in periodically poled KTP. Opt. Express 13, 5270–5278 (2005).
Phillips, C. R., Mayer, A. S., Klenner, A. & Keller, U. Femtosecond mode locking based on adiabatic excitation of quadratic solitons. Optica 2, 667–674 (2015).
Phillips, C. R., Mayer, A. S., Klenner, A. & Keller, U. SESAM modelocked Yb:CaGdAlO4 laser in the soliton modelocking regime with positive intracavity dispersion. Opt. Express 22, 6060–6077 (2014).
Aleksandrov, V. S., Iliev, H. & Buchvarov, I. in Advanced Solid State Lasers, ATh2A.40 (Optical Society of America, Berlin, 2015).
Petit, J., Goldner, P. & Viana, B. Laser emission with low quantum defect in Yb:CaGdAlO4. Opt. Lett. 30, 1345–1347 (2005).
Herrmann, J. Theory of Kerr-lens mode locking: role of self-focusing and radially varying gain. J. Opt. Soc. Am. B. 11, 498–512 (1994).
Haiml, M., Grange, R. & Keller, U. Optical characterization of semiconductor saturable absorbers. Appl. Phys. B. 79, 331–339 (2004).
Grange, R. et al. New regime of inverse saturable absorption for self-stabilizing passively mode-locked lasers. Appl. Phys. B. 80, 151–158 (2005).
Klenner, A. et al. Gigahertz frequency comb offset stabilization based on supercontinuum generation in silicon nitride waveguides. Opt. Express 24, 11043–11053 (2016).
Mayer, A. S. et al. Offset-free gigahertz midinfrared frequency comb based on optical parametric amplification in a periodically poled lithium niobate waveguide. Phys. Rev. Appl. 6, 054009 (2016).
Mayer, B. W., Phillips, C. R., Gallmann, L., Fejer, M. M. & Keller, U. Sub-four-cycle laser pulses directly from a high-repetition-rate optical parametric chirped-pulse amplifier at 3.4 µm. Opt. Lett. 38, 4265–4268 (2013).
Phillips, C. R. et al. Apodization of chirped quasi-phasematching devices. J. Opt. Soc. Am. B 30, 1551–1568 (2013).
Suchowski, H., Prabhudesai, V., Oron, D., Arie, A. & Silberberg, Y. Robust adiabatic sum frequency conversion. Opt. Express 17, 12731–12740 (2009).
Ilday, F. Ö., Beckwitt, K., Chen, Y.-F., Lim, H. & Wise, F. W. Controllable Raman-like nonlinearities from nonstationary, cascaded quadratic processes. J. Opt. Soc. Am. B 21, 376–383 (2004).
Schibli, T. R., Thoen, E. R., Kärtner, F. X. & Ippen, E. P. Suppression of Q-switched mode locking and break-up into multiple pulses by inverse saturable absorption. Appl. Phys. B 70, S41–S49 (2000).
Hasse, K., Calmano, T., Deppe, B., Liebald, C. & Kränkel, C. Efficient Yb3+:CaGdAlO4 bulk and femtosecond-laser-written waveguide lasers. Opt. Lett. 40, 3552–3555 (2015).
Phillips, C. R., Pelc, J. S. & Fejer, M. M. Parametric processes in quasi-phasematching gratings with random duty cycle errors. J. Opt. Soc. Am. B 30, 982–993 (2013).
Gayer, O., Sacks, Z., Galun, E. & Arie, A. Temperature and wavelength dependent refractive index equations for MgO-doped congruent and stoichiometric LiNbO3. Appl. Phys. B 91, 343–348 (2008).
Acknowledgements
This work was supported by the Swiss Innovation Promotion Agency with the CTI contract No. 17137.1 PFMN-NM.
Author information
Authors and Affiliations
Contributions
A.S.M. designed the 10 GHz laser cavity and carried out the measurements. C.R.P. designed the PPLN device. C.R.P. and A.S.M. performed the numerical simulations. U.K. led the project. All authors contributed to the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Mayer, A.S., Phillips, C.R. & Keller, U. Watt-level 10-gigahertz solid-state laser enabled by self-defocusing nonlinearities in an aperiodically poled crystal. Nat Commun 8, 1673 (2017). https://doi.org/10.1038/s41467-017-01999-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-017-01999-y
- Springer Nature Limited
This article is cited by
-
Absolute SESAM characterization via polarization-resolved non-collinear equivalent time sampling
Applied Physics B (2022)
-
Nonlinear-mirror mode-locked 1052 nm Yb:CALGO laser
Optical and Quantum Electronics (2019)