Abstract
Organoboron compounds play an irreplaceable role in synthetic chemistry and the related transformations based on the unique reactivity of C–B bond are potentially the most efficient methods for the synthesis of organic molecules. The synthetic importance of multiboron compounds in C–C bond formation and function transformation reactions is growing and the related borations of activated or nonactivated alkenes have been developed recently. However, introducing directly two boron moieties into the terminal sites of alkenes giving 1,1-diborylalkanes in a catalytic fashion has not been explored yet. Here we describe a synthetic strategy of 1,1-diborylalkanes via a Ni-catalyzed 1,1-diboration of readily available terminal alkenes. This methodology shows high level of chemoselectivity and regioselectivity and can be used to convert a large variety of terminal alkenes, such as vinylarenes, aliphatic alkenes and lower alkenes, to 1,1-diborylalkanes.
Similar content being viewed by others
Introduction
Organoboron compounds are recognized as versatile building blocks and fundamental intermediates in organic synthesis1,2,3,4,5. Particularly because these compounds are usually air and moisture stable and easy to handle compared with Grignard reagents, organolithium reagents, and also enable further transformations based on the unique reactivity of the C–B bond6. Transition-metal catalyzed conversion of sp2-hybridized carbon in alkenes to C(sp3)-B bond for the formation of organoboron building blocks is a more recently developed class7 (Fig. 1a). Several pioneer synthetic methods of momoborylalkanes, 1,2-diborylalkanes and 1,1,1-triborylalkanes from alkenes have been reported recently. Rh-catalyzed synthesis of 1,2-diborylalkanes from terminal vinylarenes was firstly reported by Westcott and co-workers, although the 1,2-diboration product was obtained in very low yield8. The enantioselective 1,2-diboration of terminal alkenes catalyzed by platinum catalyst, combined with Suzuki coupling reactions was achieved by Morken’s group9. Huang’s group also reported a Co-catalyzed protocol for the formation of 1,1,1-triborylalkanes, but the alkene substrates are restricted to vinylarenes10.
As an important class of organoboron compounds, it is undeniable that the 1,1-diborylalkanes show significant applications in organic synthesis. They can either be manipulated in enantioselective catalytic fashion11,12,13,14,15 (Fig. 1b) and or they can provide powerful synthetic module for concise synthesis of complex molecules through multiple C–C bond formation16,17,18,19,20,21,22 (Fig. 1c), function transformation reactions (Fig. 1d), or both. However, direct synthesis of 1,1-diborylalkanes from terminal alkenes has not been achieved yet. If successful, both synthesis of 1,1-diborylalkanes in synthetic chemistry and applications of alkenes from petrochemical industry will be greatly improved.
Results
Reaction discovery
As the major research focus of our group, efforts were devoted to discover new C–B bond forming reactions and alkenes functionalization reactions55,56,57. We now report the discovery of a synthetic method of 1,1-diborylalkanes, namely, Ni-catalyzed 1,1-diboration of terminal alkenes (Fig. 1e). This reaction provides a convenient strategy for the synthesis of 1,1-diborylalkanes from more stable and less expensive substrates (alkenes and boronic ester). The reaction shows high levels of chemo- and regio-selectivity. As reactions related to organoboron compounds have enjoyed great success in modern organic synthesis, the present reaction is expected to find important applications in synthetic chemistry.
Investigation of reaction conditions
Various bases, ligands, solvents and Ni catalysts for the 1,1-diboration reaction of 4-phenyl-1-butene 1 with bis(pinacolato)diboron (B2pin2) were screened (Table 1 and Supplementary Tables 1–4). Initially, we tried tricyclohexyl phosphine, a monodentate phosphine ligand that worked well for boration reactions. To our delight, the desired product 2 was obtained in 39% GC yield and only trace amount of 1,2-diboration byproduct 2′ was detected. Some other bases except LiOMe have weakened the 1,1-diboration and only Cs2CO3 showed a little effect giving 2 in 22% yield (entry 2–5). We then moved our attention to a sample of 1-analogs and nitrogen heterocyclic carbene (NHC) ligands. To our disappointment, these ligands were found to be ineffective and only trace amount of 2 and 2′ were detected (entries 6–8). We were enlightened by the optimization results that the ligands bearing dicyclohexylphosphine moiety may be good for the 1,1-diboration reaction. Surprisingly, when Cy-XantPhos was used, 2 was increased to 62% yield (entry 9). Higher yield (52%) could also be obtained using THF as solvent (entry 10). Further optimization of the reaction system on the basis of entry 9 and entry 10, we used NEt3 as an additive, PhMe/THF (v/v 10:1) as solvent and this diboration reaction could proceed smoothly with lower catalyst (5%) and ligand loadings (5%) in 1 h, giving 2 in 78% yield (entry 11). The 1,1-diboration could not be proceeded in the absence of Ni catalyst (entry 12). Some other nickel sources were also tested, but they were not effective (entry 13, 14 and Supplementary Table 4).
Scope of the methodology
The substrate scope for the 1,1-diboration of aliphatic alkenes was shown in Table 2. A variety of nonactivated terminal aliphatic alkenes could be readily converted to the desired products with modest to high yields (25–78%). Substrates with different chain lengths (2–7) could react smoothly. A host of different ethers, such as aryl ether (8–10), silyl ether (12) and benzyl ether (20) could participate well in the target reaction. Notably, methoxyl group amenable for Ni-catalyzed C-O cleavage did not compete with the efficacy of our 1,1-diboration event. As an important class of biologically active molecules, various nitrogen-containing moieties, such as indole (13), carbazole (14), and methyl benzylamine (16), amide (16, 17), all survived the 1,1-diboration. Interestingly, multiboron compounds (18, 19) could be smoothly synthesized from alkenes bearing Bpin moieties, thus providing an additional handle for further group transformations, cross-coupling reactions, or both. Furthermore, R-glyceraldehyde-acetonide derivative can be transformed into 20 in 78% yield. The diboration process is not affected by sterical hindrance of groups in mono-substituted alkenes (e.g., 21). Internal alkenes could be well accommodated in this reaction, albeit achieving 22 and 23 only in acceptable yield. In line with the expected reaction result, 1,1-disubstituted alkene 25 and internal alkene (e.g., 22) are ineffective substrates. Besides, B2pai2 can also be used as boron source and the desired product (24) was obtained in 56% yield. Underscoring the utility of our protocol, gram-scale diboration reactions of substrate 1-decene (5.61 g, 40.0 mmol) and 1-(hex-5-en-1-yl)-1H-indole (1.00 g, 5.0 mmol) were conducted under standard conditions respectively. Gratifyingly, there was very little lose in isolated yield of 6 (55%) and 13 (66%) (Table 2 and Supplementary Methods).
Next, we turned our attention to validate the generality of our 1,1-diboration protocol for vinylarenes (Table 3). To our disappointment, the optimized reaction conditions for terminal aliphatic alkenes have little effect on vinylarenes. However, fine-tuning of ligands on the basis of the reaction parameters, we found that tricyclohexyl phosphine could afford the desired product in satisfactory yields. Notably, similar results were obtained regardless of the electron-donating (e.g., 27, 29, 30) or electron-withdrawing (32, 33) groups on the substrates. Steric hindrance (e.g., 30) shows subtle influence on the yield of the desired products.
1,1-Diboration of sugar derivatives, LCs and lower alkenes
This 1,1-diboration reaction of terminal alkenes was utilized for the modification of sugar derivatives, liquid crystals (LCs) and even ethylene shown in Fig. 2. C-alkyl or O-alkyl glycosides are important bioactive candidates58. It would therefore be interesting to use our reaction to modify glycosides to form 1,1-diboron-containing bioactive synthons. C-allyl D-glucose derivative 35 was synthesized from tetrabenzyl-protected D-glucose 34 via fluorination and subsequent allylation. 1,1-Diboration of 35 under the optimal reaction conditions, the desired product 36 was obtained in 63% yield. Furthermore, the O-alkyl substrate 38 can be transformed into 39 in 69% yield with the protecting group acetonide well tolerated, which is a frequently used protecting group in sugar chemistry. Fluorinated Liquid crystals (LCs), because of their high birefringence and small losses in terahertzband and susceptibility for electric and magnetic field, are excellent materials to construct tunable optical devices (e.g., phase shifters, phase gratings lenses, filters and metamaterials)59. Commercial available LCs 40 possessing a side alkenyl chain was successfully modified using our protocol. The desired product 41 was obtained in 47% yield. The two newly formed C-B bonds made 41 possible to transform in a more enriched way to afford other possible LCs molecules via further C–B bond transformations. We notice that double bond in the side carbon chain of LCs is not a necessary functional group, and many other useful LCs molecules could be derived from this double bond59. To further highlight the practicality of our protocol in lower alkenes, propylene 42 was utilized and it could be successfully1,1-diborated. The desired product 43 was isolated in 82% yield. Performing diboration of another kind of lower alkenes ethylene 44 afforded the 1,1-diboration product 45 and 1,2-diboration undesired product 46 in 45% combined yield, and the ratio of 45/46 was 1:2 (Supplementary Fig. 56). Diboration results of 42 and 44 indicate that steric hindrance in alkenes plays a positive role in this site-selective matter. The above transformations demonstrated a vast application prospect of our developed reaction.
Discussion
A set of experiments were executed as additional evidence in support of our proposed catalytic cycle (Supplementary Discussions). The cross-over experiment of 1 with B2pin2 and B2pai2 to yield 2, 47 and 24 indicates that the two boron motifs in the products were supplied by two molecular bisboronic ester (Fig. 3a). The result of cross-over experiment of 1 with B2pin2 and B2pin2-d 12 is also in accordance with the above observations (Supplementary Discussions and Supplementary Fig. 61 for more details). Deuterium labeling studies were conducted by using 4-(2,2-dideuterovinyl)-1,1′-biphenyl (29a-d 2) as the substrate (93% deuterium content) and one of benzylic hydrogen atoms in the product was 92% deuterated (Fig. 3b). This deuterium experiment illustrated that one of the benzylic hydrogen atoms is originated from hydrogen atoms bonded in terminal site of alkenes. Through nickel-catalyzed alkenes boration and subsequent hydroboration process, we realize the 1,1-selective diboration of alkenes. Diboration of alkenes was all proceeded in a 1,2-selective manner before this study.
In summary, we have successfully developed a chemo- and regio-selective Ni-catalyzed 1,1-diboration reaction of terminal alkenes. Tremendous variety of terminal alkenes (vinylarenes, aliphatic alkenes and low alkenes) could react smoothly in this methodology. This reaction provides an effective and convenient way for the synthesis of 1,1-diborylalkanes. The obtained products provides an excellent platform for achieving complex structures and via C–C bond formation, function transformations and even enantioselective catalytic cross-coupling reactions. Novel reactions of 1,1-diborylalkanes are being explored in our laboratory.
Methods
General procedure for 1,1-diboration of aliphatic alkenes
In a glove box, a mixture of 5% Ni(COD)2 (2.8 mg, 0.01 mmol), 5% Cy-XantPhos (6.0 mg, 0.01 mmol), LiOMe (7.6 mg, 0.2 mmol, 1.0 equiv.) and B2pin2 (101.6 mg, 0.4 mmol, 2.0 equiv.) were added to a Schlenk tube equipped with a stir bar. The vessel was evacuated and filled with argon for three cycles. 0.55 mL PhMe/THF (v/v, 10:1), NEt3 (14 µL, 0.5 equiv.) and alkenes (0.2 mmol, 1.0 equiv.) were added respectively under a positive flow of argon. The reaction mixture was stirred at room temperature (r.t.) for seconds and then transferred to a pre-heated 130 °C oil bath. After 1 h stirring, the reaction mixture was cooled to r.t. and then diluted with DCM, filtered through silica gel with copious washings by EtOAc, concentrated, and purified by silica gel chromatography to afford the desired product.
Data availability
The authors declare that the data supporting the findings of this study are available within the article and its Supplementary Information files. For the experimental procedures, see Supplementary Methods. For NMR, GC-MS and HRMS analysis of the compounds in this article, see Supplementary Figs 1–62. For X-ray data of compound 41 (CCDC No. 1525017), see Supplementary Table 5 and Supplementary Fig. 63. The crystal data can be obtained free of charge from the Cambridge Crystallographic Data Center (www.ccdc.cam.ac.uk).
References
Ishiyama, T. & Miyaura, N. Metal-catalyzed reactions of diborons for synthesis of organoboron compounds. Chem. Rec. 3, 271–280 (2004).
Xu, L., Zhang, S. & Li, P. Boron-selective reactions as powerful tools for modular synthesis of diverse complex molecules. Chem. Soc. Rev. 44, 8848–8858 (2015).
Burns, M. et al. Assembly-line synthesis of organic molecules with tailored shapes. Nature 513, 183–188 (2014).
Bonet, A., Odachowski, M., Leonori, D., Essafi, S. & Aggarwal, V. K. Enantiospecific sp2–sp3 coupling of secondary and tertiary boronic esters. Nat. Chem. 6, 584–589 (2014).
Mei, T. S., Patel, H. H. & Sigman, M. S. Enantioselective construction of remote quaternary stereocentres. Nature 508, 340–344 (2014).
Neeve, E. C., Geier, S. J., Mkhalid, I. A., Westcott, S. A. & Marder, T. B. Diboron (4) compounds: from structural curiosity to synthetic workhorse. Chem. Rev. 116, 9091–9161 (2016).
Takaya, J. & Iwasawa, N. Catalytic, direct synthesis of bis(boronate) compounds. ACS Catal 2, 1993–2006 (2012).
Baker, R. T., Nguyen, P., Marder, T. B. & Westcott, S. A. Transition metal catalyzed diboration of vinylarenes. Angew. Chem. Int. Ed. 34, 1336–1338 (1995).
Mlynarski, S. N., Schuster, C. H. & Morken, J. P. Asymmetric synthesis from terminal alkenes by cascades of diboration and cross-coupling. Nature 505, 386–390 (2014).
Zhang, L. & Huang, Z. Synthesis of 1, 1, 1-tris(boronates) from vinylarenes by Co-catalyzed dehydrogenative borylations–hydroboration. J. Am. Chem. Soc. 137, 15600–15603 (2015).
Sun, C., Potter, B. & Morken, J. P. A catalytic enantiotopic-group-selective Suzuki reaction for the construction of chiral organoboronates. J. Am. Chem. Soc. 136, 6534–6537 (2014).
Matteson, D. S. Boronic esters in stereodirected synthesis. Tetrahedron 45, 1859–1885 (1989).
Joannou, M. V., Moyer, B. S. & Meek, S. J. Enantio- and diastereoselective synthesis of 1,2-hydroxyboronates through Cu-catalyzed additions of alkylboronates to aldehydes. J. Am. Chem. Soc. 137, 6176–6179 (2015).
Murray, S. A., Green, J. C., Tailor, S. B. & Meek, S. J. Enantio- and diastereoselective 1,2-additions to α-ketoesters with diborylmethane and substituted 1,1-diborylalkanes. Angew. Chem. Int. Ed. 55, 9065–9069 (2016).
Shi, Y. & Hoveyda, A. H. Catalytic SN2′- and enantioselective allylic substitution with a diborylmethane reagent and application in synthesis. Angew. Chem. Int. Ed. 128, 3516–3519 (2016).
Endo, K., Ohkubo, T., Hirokami, M. & Shibata, T. Chemoselective and regiospecific Suzuki coupling on a multisubstituted sp3-carbon in 1,1-diborylalkanes at room temperature. J. Am. Chem. Soc. 132, 11033–11035 (2010).
Hong, K., Liu, X. & Morken, J. P. Simple access to elusive α-boryl carbanions and their alkylation: an umpolung construction for organic synthesis. J. Am. Chem. Soc. 136, 10581–10584 (2014).
Potter, B., Szymaniak, A. A., Edelstein, E. K. & Morken, J. P. Nonracemic allylic boronates through enantiotopic-group-selective cross-coupling of geminal bis(boronates) and vinyl halides. J. Am. Chem. Soc. 136, 17918–17921 (2014).
Kim, J., Park, S., Park, J. & Cho, S. H. Synthesis of branched alkylboronates by copper-catalyzed allylic substitution reactions of allylic chlorides with 1,1-diborylalkanes. Angew. Chem. Int. Ed. 55, 1498–1501 (2016).
Cui, L. C., Zhang, Z. Q., Lu, X., Xiao, B. & Fu, Y. Pd-catalyzed cross-coupling of 1,1-diborylalkanes with aryl triflates. RSC Adv. 6, 51932–51935 (2016).
Zhang, Z. Q. et al. Copper-catalyzed/promoted cross-coupling of gem-diborylalkanes with nonactivated primary alkyl halides: an alternative route to alkylboronic esters. Org. Lett. 16, 6342–6345 (2014).
Endo, K., Ishioka, T., Ohkubo, T. & Shibata, T. One-pot synthesis of symmetrical and unsymmetrical diarylmethanes via diborylmethane. J. Org. Chem. 77, 7223–7231 (2012).
Morimoto, M., Miura, T. & Murakami, M. Rhodium-catalyzed dehydrogenative borylation of aliphatic terminal alkenes with pinacolborane. Angew. Chem. Int. Ed. 127, 12850–12854 (2015).
Tseng, K. N. T., Kampf, J. W. & Szymczak, N. K. Regulation of iron-catalyzed olefin hydroboration by ligand modifications at a remote Site. ACS Catal 5, 411–415 (2014).
Zhang, L., Peng, D., Leng, X. & Huang, Z. Iron-catalyzed, atom-economical, chemo- and regioselective alkene hydroboration with pinacolborane. Angew. Chem. Int. Ed. 125, 3764–3768 (2013).
Greenhalgh, M. D. & Thomas, S. P. Chemo-, regio-, and stereoselective iron-catalyzed hydroboration of alkenes and alkynes. Chem. Commun. 49, 11230–11232 (2013).
Obligacion, J. V. & Chirik, P. J. Highly selective bis(imino)pyridine iron-catalyzed alkene hydroboration. Org. Lett. 15, 2680–2683 (2013).
Obligacion, J. V. & Chirik, P. J. Bis(imino)pyridine cobalt-catalyzed alkene isomerization–hydroboration: a strategy for remote hydrofunctionalization with terminal selectivity. J. Am. Chem. Soc. 135, 19107–19110 (2013).
Zhang, L., Zuo, Z., Wan, X. & Huang, Z. Cobalt-catalyzed enantioselective hydroboration of 1,1-disubstituted aryl alkenes. J. Am. Chem. Soc. 136, 15501–15504 (2014).
Yamamoto, Y., Fujikawa, R., Umemoto, T. & Miyaura, N. Iridium-catalyzed hydroboration of alkenes with pinacolborane. Tetrahedron 60, 10695–10700 (2004).
Caballero, A. & Sabo-Etienne, S. Ruthenium-catalyzed hydroboration and dehydrogenative borylation of linear and cyclic alkenes with pinacolborane. Organometallics 26, 1191–1195 (2007).
Morgan, J. B., Miller, S. P. & Morken, J. P. Rhodium-catalyzed enantioselective diboration of simple alkenes. J. Am. Chem. Soc. 125, 8702–8703 (2003).
Trudeau, S., Morgan, J. B., Shrestha, M. & Morken, J. P. Rh-catalyzed enantioselective diboration of simple alkenes: reaction development and substrate scope. J. Org. Chem. 70, 9538–9544 (2005).
Kliman, L. T., Mlynarski, S. N. & Morken, J. P. Pt-Catalyzed enantioselective diboration of terminal alkenes with B2(pin)2. J. Am. Chem. Soc. 131, 13210–13211 (2009).
Iverson, C. N. & Smith, M. R. Efficient olefin diboration by a base-free platinum catalyst. Organometallics 16, 2757–2759 (1997).
Lillo, V., Mata, J., Ramírez, J., Peris, E. & Fernández, E. Catalytic diboration of unsaturated molecules with platinum(0)-NHC: selective synthesis of 1,2-dihydroxysulfones. Organometallics 25, 5829–5831 (2006).
Lillo, V. et al. A valuable, inexpensive CuI/N‐heterocyclic carbene catalyst for the selective diboration of styrene. Chem. Eur. J. 13, 2614–2621 (2007).
Ely, R. J. & Morken, J. P. Ni(0)-Catalyzed 1,4-selective diboration of conjugated dienes. Org. Lett. 12, 4348–4351 (2010).
Woodward, A. R., Burks, H. E., Chan, L. M. & Morken, J. P. Concatenated catalytic asymmetric allene diboration/allylation/functionalization. Org. Lett. 7, 5505–5507 (2005).
Bonet, A., Pubill‐Ulldemolins, C., Bo, C., Gulyás, H. & Fernández, E. Transition‐metal‐free diboration reaction by activation of diboron compounds with simple Lewis bases. Angew. Chem. Int. Ed. 50, 7158–7161 (2011).
Blaisdell, T. P., Caya, T. C., Zhang, L., Sanz-Marco, A. & Morken, J. P. Hydroxyl-directed stereoselective diboration of alkenes. J. Am. Chem. Soc. 136, 9264–9267 (2014).
Lee, J. C. H., McDonald, R. & Hall, D. G. Enantioselective preparation and chemoselective cross-coupling of 1,1-diboron compounds. Nat. Chem. 3, 894–899 (2011).
Feng, X., Jeon, H. & Yun, J. Regio- and enantioselective copper(I)-catalyzed hydroboration of borylalkenes: asymmetric synthesis of 1,1-diborylalkanes. Angew. Chem. Int. Ed. 52, 3989–3992 (2013).
Lennox, A. J. & Lloyd-Jones, G. C. Selection of boron reagents for Suzuki–Miyaura coupling. Chem. Soc. Rev. 43, 412–443 (2014).
Schmidt, J., Choi, J., Liu, A. T., Slusarczyk, M. & Fu, G. C. A general, modular method for the catalytic asymmetric synthesis of alkylboronate esters. Science 354, 1265–1269 (2016).
Ito, H. & Kubota, K. Copper (I)-catalyzed boryl substitution of unactivated alkyl halides. Org. Lett. 14, 890–893 (2012).
Zuo, Z. & Huang, Z. Synthesis of 1,1-diboronate esters by cobalt-catalyzed sequential hydroboration of terminal alkynes. Org. Chem. Front 3, 434–438 (2016).
Lee, S., Li, D. & Yun, J. Copper-catalyzed synthesis of 1,1-diborylalkanes through regioselective dihydroboration of terminal alkynes. Chem. Asian J 9, 2440–2443 (2014).
Endo, K., Hirokami, M. & Shibata, T. Synthesis of 1,1-organodiboronates via Rh(I)Cl-catalyzed sequential regioselective hydroboration of 1-alkynes. Synlett. 2009, 1331–1335 (2009).
Li, H., Wang, L., Zhang, Y. & Wang, J. Transition-metal-free synthesis of pinacol alkylboronates from tosylhydrazones. Angew. Chem. Int. Ed. 124, 2997–3000 (2012).
Abu Ali, H., Goldberg, I., Kaufmann, D., Burmeister, C. & Srebnik, M. Novel C1-bridged bisboronate derivatives by insertion of diazoalkanes into bis(pinacolato)diborane(4). Organometallics 21, 1870–1876 (2002).
Cho, S. H. & Hartwig, J. F. Iridium-catalyzed diborylation of benzylic C–H bonds directed by a hydrosilyl group: synthesis of 1, 1-benzyldiboronate esters. Chem. Sci 5, 694–698 (2014).
Palmer, W. N., Zarate, C. & Chirik, P. J. Benzyltriboronates: building blocks for diastereoselective carbon-carbon bond formation. J. Am. Chem. Soc. 139, 2589–2592 (2017).
Palmer, W. N., Obligacion, J. V., Pappas, I. & Chirik, P. J. Cobalt-catalyzed benzylic borylation: enabling polyborylation and functionalization of remote, unactivated C(sp3)–H bonds. J. Am. Chem. Soc. 138, 766–769 (2016).
Su, W. et al. Ligand-controlled regiodivergent copper-catalyzed alkylboration of alkenes. Angew. Chem. Int. Ed. 54, 12957–12961 (2015).
Lu, X. et al. Practical carbon-carbon bond formation from olefins through nickel-catalyzed reductive olefin hydrocarbonation. Nat. Commun. 7, 11129–11136 (2016).
Yang, C. T. et al. Alkylboronic esters from copper-catalyzed borylation of primary and secondary alkyl halides and pseudohalides. Angew. Chem. Int. Ed. 51, 528–532 (2012).
Regan, B. M. & Hayes, F. N. 17- and 17a-Aza-D-homosteroids. J. Am. Chem. Soc. 78, 639–643 (1956).
Kanie, K. & Muramatsu, A. Organic-inorganic hybrid liquid crystals: thermotropic mesophases formed by hybridization of liquid-crystalline phosphates and monodispersed α-Fe2O3 particles. J. Am. Chem. Soc. 127, 11578–11579 (2005).
Acknowledgements
We thank the support from the National Natural Science Foundation of China (21325208, 21472181, 21572212 and 21502184), Ministry of Science and Technology of China (2017YFA0303500), Chinese Academy of Science (XDB20000000), Youth Innovation Promotion Association of the Chinese Academy of Sciences (2015371), FRFCU and PCSIRT.
Author information
Authors and Affiliations
Contributions
L.L. designed and carried out the experimental work. X.L. and T.G. helped to complete the experimental work. B.X. and Y.F. directed the project and wrote the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, L., Gong, T., Lu, X. et al. Nickel-catalyzed synthesis of 1,1-diborylalkanes from terminal alkenes. Nat Commun 8, 345 (2017). https://doi.org/10.1038/s41467-017-00363-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-017-00363-4
- Springer Nature Limited
This article is cited by
-
Catalytic 1,1-diazidation of alkenes
Nature Communications (2024)
-
Alkyne synthesis through coupling of gem-diborylalkanes with carboxylic acid esters
Nature Synthesis (2023)
-
Cobalt-catalyzed deoxygenative triborylation of allylic ethers to access 1,1,3-triborylalkanes
Nature Communications (2020)
-
Versatile cobalt-catalyzed regioselective chain-walking double hydroboration of 1,n-dienes to access gem-bis(boryl)alkanes
Nature Communications (2020)