Abstract
Effects of micro-alloying elements and production process on microstructure, mechanical properties and precipitates of 600 MPa grade rebars were studied by using pilot test, metallographic observation, tensile test, thermodynamic calculation and transmission electron microscopy. The results show that the tested steels are composed of ferrite and pearlite, in which the content range of pearlite is 33%–45%. For vanadium micro-alloyed steel, interphase precipitation strengthening effect of V can be promoted and the yield strength of tested steels can be increased with increasing V content and decreasing finishing rolling temperature. The temperature of terminated cooling should be more than 700 °C when the water cooling is used. When niobium is added to the steel, more coarse (Nb, V)C,N precipitates are generated at high temperature, so that the solid solubility of precipitated phases of vanadium is reduced and the precipitation strengthening effect of vanadium is weakened.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
H. W. Kuang, W. Pan, L. Y. Ye, Ind. Const. 46 (2016) 620–626 (in Chinese).
C. F. Yang, Iron and Steel 45 (2010) No. 11, 1–11 (in Chinese) .
J. W. Pan, Experimental Research on Mechanical Properties of 600 MPa Steel Bars under High Temperature, Qingdao University of Technology, Qingdao, 2015 (in Chinese).
H. Khalifa, G. M. Megahed, R. M. Hamouda, M. A. Taha, J. Mater. Process. Technol. 230 (2016) 244–253.
M. Mukherjee, C. Dutta, A. Haldar, Mater. Sci. Eng. A 543 (2012) 35–43.
S. K. Paul, S. Majumdar, S. Kundu, Mater. Des. 58 (2014) 402–411.
X. D. Huo, L. J. Li, Z. W. Peng, S. J. Chen, J. Iron Steel Res. Int. 23 (2016) 593–601.
Q. Y. Zhang, J. Zhang, G. P. Liu, L. T. Wang, in: CSM, Baosteel Group Corp. (Ed.), Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, Metallurgical Industry Press, Shanghai, 2015, pp. 1–8.
H. L. Wei, G. Q. Liu, Mater. Des. 56 (2014) 437–444.
S. Ghosh, A. K. Singh, S. Mula, P. Chanda, V. V. Mahashabde, T. K. Roy, Mater. Sci. Eng. A 684 (2017) 22–36.
C. F. Yang, Y. Q. Zhang, R. Z. Wang, The Principle and Application of Vanadium Steel Metallurgy, Metallurgical Industry Press, Beijing, 2012 (in Chinese).
F. Z. Bu, X. M. Wang, S. W. Yang, C. J. Shang, R. D. K. Misra, Mater. Sci. Eng. A 620 (2015) 22–29.
P. Gong, E. J. Palmiere, W. M. Rainforth, Acta Mater. 97 (2015) 392–403.
Y. Guan, X. Z. Zhang, J. Y. Ma, Adv. Mater. Res. 311–313 (2011) 817–821.
C. F. Yang, Q. L. Wang, J. Iron Steel Res. Int. 15 (2008) No. 2, 81–86.
L. Qi, A. M. Zhao, Z. Z. Zhao, Y. Huang, Mater. Sci. Technol. 20 (2012) No. 6, 29–34 (in Chinese).
T. N. Baker, Mater. Sci. Technol. 25 (2009) 1083–1107.
F. Fang, Q. L. Yong, C. F. Yang, H. Su, J. Iron Steel Res. Int. 17 (2010) No. 2, 36–42.
M. A. Bepari, Metall. Trans. A 21 (1990) 2839–2855.
S. Shanmugam, R. D. K. Misra, T. Mannering, D. Panda, S. G. Jansto, Mater. Sci. Eng. A 437 (2006) 436–445.
S. F. Medina, Acta Mater. 84 (2015) 202–207.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pan, Hb., Zhang, Mj., Liu, Wm. et al. Effects of micro-alloying and production process on precipitation behaviors and mechanical properties of HRB600. J. Iron Steel Res. Int. 24, 536–543 (2017). https://doi.org/10.1016/S1006-706X(17)30081-X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(17)30081-X