Abstract
Effects of friction stir processing (FSP) parameters and reinforcements on the wear behavior of 6061-T6 based hybrid composites were investigated. A mathematical formulation was derived to calculate the wear volume loss of the composites. The experimental results were contrasted with the results of the proposed model. The influences of sliding distance, tool traverse and rotational speeds, as well as graphite (Gr) and titanium carbide (TiC) volume fractions on the wear volume loss of the composites were also investigated using the prepared formulation. The results demonstrated that the wear volume loss of the composites significantly increased with increasing sliding distance, tool traverse speed, and rotational speed; while the wear volume loss decreased with increasing volume fraction of the reinforcements. A minimum wear volume loss for the hybrid composites with complex reinforcements was specified at the inclusion ratio of 50% TiG+50% Al2O3 because of improved lubricant ability, as well as resistance to brittleness and wear. New possibilities to develop wear-resistant aluminum-based composites for different industrial applications were proposed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
D. Das, P. Mishra, S. Singh, S. Pattanaik, Int. J. Mech. Mater. Eng. 9 (2014) 1–15.
C. M. L. Wu, G. W. Han, Mater. Charact. 58 (2007) 416–422.
S. P. Rawal, JOM 53 (2001) 14–17.
J. Hooker, P. Doorbar, Mater. Sci. Technol. 16 (2000) 725–731.
C. Leyens, M. Peters, Titanium and Titanium Alloys, Wiley Online Library, 2003.
A. Macke, B. F. Schultz, P. Rohatgi, Adv. Mater. Processes 170 (2012) 19–23.
T. V. Christy, N. Murugan, S. Kumar, J. Min. Mater. Charact. Eng. 9 (2010) 57–65.
D. Lu, Y. Jiang, R. Zhou, Wear 305 (2013) 286–290.
K. M. Shorowordi, A. S. M. A. Haseeb, J. P. Celis, Wear 261 (2006) 634–641.
N. Murugan. B. Ashok Kumar, Mater. Des. 51 (2013) 998–1007.
N. Yuvaraj, S. Aravindan, J. Mater. Res. Technol. 4 (2015) 398–410.
X. Tong, Thermally Conductive Ceramic Matrix Composites, Advanced Materials for Thermal Management of Electronic Packaging, Springer, New York, 2011, pp. 277–304.
S. R. Anvari, F. Karimzadeh, M. H. Enayati, Wear 304 (2013) 144–151.
K. Funatani, K. Kurosawa, Adv. Mater. Processes 146 (1994) 27–30.
M. Skibo, P. Morris, D. Lloyd, Proceedings of the World Materials Congress, Chicago, 1988, pp. 257–262.
D. Huda, M. E. Baradie, M. Hashmi, J. Mater. Process. Technol. 37 (1993) 513–528.
D. C. Hofmann, K. S. Vecchio, Mater. Sci. Eng. A 402 (2005) 234–241.
A. Dolatkhah, P. Golbabaei, M. K. Besharati Givi, F. Molaiekiya, Mater. Des. 37 (2012) 458–464.
M. Raaft, T. S. Mahmoud, H. M. Zakaria, T. A. Khalifa, Mater. Sci. Eng. A 528 (2011) 5741–5746.
H. I. Kurt, Composites Part B: Engineering 93 (2016) 26–34.
R. Nandan, T. DebRoy, H. K. D. H. Bhadeshia, Progress in Materials Science 53 (2008) 980–1023.
Y. Morisada, H. Fujii, T. Nagaoka, M. Fukusumi, Mater. Sci. Eng. A 419 (2006) 344–348.
E. R. I. Mahmoud, M. Takahashi, T. Shibayanagi, K. Ikeuchi, Sci. Technol. Weld. Join. 14 (2009) 413–425.
S. J. Vijay, N. Murugan, Mater. Des. 31 (2010) 3585–3589.
R. Ashok Kumar, M. Thansekhar, Advanced Materials Research, Trans. Tech. Publ. 2014, pp. 586–591.
S. M. Aktarer, D. M. Sekban, O. Saray, T. Kucukomeroglu, Z. Y. Ma, G. Purcek, Mater. Sci. Eng. A 636 (2015) 311–319.
Z. Y. Ma, S. R. Sharma, R. S. Mishra, Scripta Mater. 54 (2006) 1623–1626.
Y. Bozkurt, H. Uzun, S. Salman, J. Compos. Mater. 45 (2011) 2237–2245.
D. Aruri, K. Adepu, K. Adepu, K. Bazavada, J. Mater. Res. Technol. 2 (2013) 362–369.
A. Devaraju, A. Kumar, B. Kotiveerachari, Trans. Nonferrous Met. Soc. China 23 (2013) 1275–1280.
R. Sathiskumar, T. Dinaharan, N. Murugan, S. J. Vijay, Trans. Nonferrous Met. Soc. China 25 (2015) 95–102.
A. Thangarasu, N. Murugan, I. Dinaharan, S. J. Vijay, Archives of Civil and Mechanical Engineering 15 (2015) 324–334.
C. M. Rejil, I. Dinaharan, S. J. Vijay, N. Murugan, Mater. Sci. Eng. A 552 (2012) 336–344.
E. R. I. Mahmoud, M. Takahashi, T. Shibayanagi, K. Ikeuchi, Wear 268 (2010) 1111–1121.
H. I. Kurt, M. Oduncuoglu, Mathematical Problems in Engineering 2015 (2015) 710526.
H. I. Kurt, M. Oduncuoglu, Int. J. Polym. Sci. 2015 (2015) 315710.
S. A. Hosseini, K. Ranjbar, R. Dehmolaei, A. R. Amirani, J. Alloys Comp. 622 (2015) 725–733.
H. Kurt, M. Oduncuoglu, Metals 5 (2015) 371–382.
H. Kurt, M. Oduncuoglu, M. Kurt, Metals 5 (2015) 836–849.
D. J. Lloyd, Int. Mater. Rev. 39 (1994) 1–23.
A. C. Lund, C. A. Schuh, Mechanical Properties: Strengthening Mechanisms in Metals A2-Wyder, Franco BassaniGerald L. LiedlPeter, Encyclopedia of Condensed Matter Physics, Elsevier, Oxford, 2005, pp. 306–311.
A. P. Semenov, J. Frict. Wear 28 (2007) 401–408.
A. Siddharth Sharma, K. Biswas, B. Basu, Wear 319 (2014) 160–171.
T. Mang, W. Dresel, Lubricants and Lubrication, 2nd ed., Wiley, Germany, 2007.
A. Shafiei-Zarghani, S. F. Kashani-Bozorg, A. Zarei-Hanzaki, Mater. Sci. Eng. A 500 (2009) 84–91.
R. V. Barenji, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2015: 1464420715584950.
C. Sharma, D. K. Dwivedi, P. Kumar, Mater. Des. 36 (2012) 379–390.
A. V. Kolubaev, E. A. Kolubaev, O. V. Sizova, A.A. Zaikina, V. E. Rubtsov, S. Y. Tarasov, P. A. Vasiliev, J. Frict. Wear 36 (2015) 127–131.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kurt, H.I., Oduncuoglu, M. & Asmatulu, R. Wear Behavior of Aluminum Matrix Hybrid Composites Fabricated through Friction Stir Welding Process. J. Iron Steel Res. Int. 23, 1119–1126 (2016). https://doi.org/10.1016/S1006-706X(16)30165-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(16)30165-0