Abstract
Effects of face-sheet thickness and core thickness of sandwich panels, and shape of projectiles on the penetration resistance of sandwich panels were discussed, while typical penetration failure modes were presented. It was shown that the anti-penetration performance of sandwich panels was enhanced with the increase of face-sheet or core thickness; The penetration resistance of sandwich panels was shown to be strongest to blunt-shaped projectile impacts, weaker to hemispherical-nose-shaped projectile impacts, and weakest to conical-shaped projectile impacts. The corresponding numerical simulation was carried out using the finite element code LS-DYNA V970. Numerical results showed that the penetration time decreased with the increase of projectile impact velocity.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Lu, G. and Yu, T.X., Energy Absorption of Structures and Materials. Cambridge: Woodhead Publishing Ltd, 2003.
Caprino, G. and Teti, R., Impact and post-impact behavior of foam core sandwich structures. Composite Structures, 1994, 29(1): 47–55.
Lopatnikov, S.L., Gama, B.A., Jahirul Haque, M., Krauthauser, C., Gillespie Jr, J.W., Guden, M. and Hall, I.W., Dynamics of metal foam deformation during Taylor cylinder–Hopkinson bar impact experiment. Composite Structures, 2003, 61(1): 61–71.
Jing, L., Wang, Z., Ning, J. and Zhao, L., The dynamic response of sandwich beams with open-cell metal foam cores. Composites Part B: Engineering, 2011, 42(1): 1–10.
Bernard, M.L. and Lagace, P.A., Impact resistance of composite sandwich plates. Journal of Reinforced Plastics and Composites, 1989, 8(5): 432–445.
Shih, W.K. and Jang, B.Z., Instrumented impact testing of composite sandwich panels. Journal of Reinforced Plastics and Composites, 1989, 8(3): 270–298.
Kiratisaevee, H. and Cantwell, W.J., Low-velocity impact response of high-performance aluminum foam sandwich structures. Journal of Reinforced Plastics and Composites, 2005, 24(10), 1057–1072.
Ma, J., Yan, Y., Liu, Y.J. and Yang, L., Compression strength of stitched foam-core sandwich composites with impact induced damage. Journal of Reinforced Plastics and Composites, 2012, 31(18): 1236–1246.
Wang, Z., Jing, L., Ning, J. and Zhao, L., The structural response of clamped sandwich beams subjected to impact loading. Composite Structures, 2011, 93(4): 1300–1308.
Zhu, F., Zhao, L., Lu, G. and Wang, Z., Deformation and failure of blast-loaded metallic sandwich panels—Experimental investigations. International Journal of Impact Engineering, 2008, 35(8): 937–951.
Qin, Q.H. and Wang, T.J., Low-velocity heavy-mass impact response of slender metal foam core sandwich beam. Composite Structures, 2011, 93(6): 1526–1537.
Jing, L., Wang, Z. and Zhao, L., Dynamic response of cylindrical sandwich shells with metallic foam cores under blast loading—Numerical simulations. Composite Structures, 2013, 99: 213–223.
Jing, L., Yang, F., Wang, Z. and Zhao, L., A numerical simulation of metallic cylindrical sandwich shells subjected to air blast loading. Latin American Journal of Solids and Structures, 2013, 10(3): 631–645.
Fatt, H. and Park, K.S., Perforation of honeycomb sandwich plates by projectiles. Composites Part A: Applied Science and Manufacturing, 2000, 31(8): 889–899.
Wen, H.M., Reddy, T.Y., Reid, S.R. and Soden, P.D., Indentation, penetration and perforation of composite laminate and sandwich panels under quasi-static and projectile loading. Key Engineering Materials, 1997, 141–143: 501–552.
Dean, J., Energy absorption during projectile perforation of lightweight sandwich panels with metallic fibre cores. Composite Structures, 2011, 93(3): 1089–1095.
Hou, W., Zhu, F., Lu, G. and Fang, D.N., Ballistic impact experiments of metallic sandwich panels with aluminum foam core. International Journal of Impact Engineering, 2010, 37(10): 1045–1055.
Buitrago, B.L., Santiuste, C., Sánchez-Sáez, S., Barbero, E. and Navarro, C., Modelling of composite sandwich structures with honeycomb core subjected to high-velocity impact. Composite Structures, 2010, 92(9): 2090–2096.
Hanssen, A.G., Girard, Y., Olovsson, L., Berstad, T. and Langseth, M., A numerical model for bird strike of aluminum foam-based sandwich panels. International Journal of Impact Engineering, 2006, 32(7): 1127–1144.
Meo, M., Vignjevic, R. and Marengo, G., The response of honeycomb sandwich panels under low-velocity impact loading. International Journal of Mechanical Sciences, 2005, 47(9): 1301–1325.
LS-DYNA970 KEYWORD USER’S MANUAL. Livermore Software Technology Corporation, 2003, Version970, 1088–1093
Lemaitre, J. and Lippmann, H., A Course on Damage Mechanics (Vol. 2). Berlin: Springer, 1996.
Author information
Authors and Affiliations
Corresponding author
Additional information
Project supported by the National Natural Science Foundation of China (Nos.11172196, 11572214 and 11402216), the Top Young Academic Leaders of Higher Learning Institutions of Shanxi and the opening foundation for State Key Laboratory of Explosion Science and Technology and the State Key Laboratory of Traction Power (No. 2014TPL_T09).
Rights and permissions
About this article
Cite this article
Yang, F., Niu, W., Jing, L. et al. Experimental and Numerical Studies of the Anti-Penetration Performance of Sandwich Panels with Aluminum Foam Cores. Acta Mech. Solida Sin. 28, 735–746 (2015). https://doi.org/10.1016/S0894-9166(16)30013-1
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S0894-9166(16)30013-1