Abstract
The effects of Sm, Si and Ca on the microstructure and mechanical property of AZ91 magnesium alloy were investigated by means of optical microscopy (OM), differential scanning calorimetry (DSC), scanning electronic microscopy (SEM), X-ray diffraction (XRD) and tensile testing. The results indicated that the addition of 1.5 wt.% Sm with or without 0.8 Si/Ca led to a decrease in the volume fraction of the β-Mg17Al12 phase and the formation of the intermetallic compounds of Al-Sm, Mg2Si, MgAlCa and Al2Ca. The microstructure of AZ91 alloy was significantly refined and distribution became discrete with additions of Sm and Ca; the average grain size of the α-Mg matrix was reduced from 239.7 ± 16.9 µm to 66.34 ± 5.10 µm. The AZ91-Sm-Ca alloy exhibited a good combination of yield strength at 135 MPa, ultimate tensile strength at 199 MPa and elongation at 4.32%, which was ascribed to grain refinement strengthening. Furthermore, the T6 treated AZ91-Sm-Ca alloy possessed yield strength of 154 MPa and elongation of 7.1%, which was due to grain refinement strengthening and reduction in discontinuous precipitates.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Mordike B L, Ebert T. Magnesium: Properties-applications-potential. Materials Science & Engineering A, 2001, 302(1): 37–45.
StJohn D H, Qian M, Easton M A, et al. The interdependence theory: the relationship between grain formation and nucleant selection. Acta Materialia, 2011, 59(12): 4907–4921.
StJohn D H, Qian M, Easton M A, et al. Grain refinement of magnesium alloys. Metallurgical and Materials Transactions A, 2005, 36(7): 1669–1679.
Kumar P, Mondal A K, Chowdhury S G, et al. Influence of additions of Sb and/or Sr on microstructure and tensile creep behaviour of squeeze-cast AZ91D Mg alloy. Materials Science & Engineering A, 2017, 683: 37–45.
Liu S F, Liu L Y, Kang L G. Refinement role of electromagnetic stirring and strontium in AZ91 magnesium alloy. Journal of Alloys and Compounds, 2008, 450: 546–550.
Wang J L, Wang L D, Wu Y M, et al. Effects of samarium on microstructures and tensile properties of Mg-5Al-0.3Mn alloy. Materials Science & Engineering A, 2011, 528(12): 4115–4119.
Sun M, Hu X Y, Peng L M, et al. Effects of Sm on the grain refinement, microstructures and mechanical properties of AZ31 magnesium alloy. Materials Science & Engineering A, 2015, 620: 89–96.
Chen Y A, Jin L, Fang D, et al. Effects of calcium, samarium addition on microstructure and mechanical properties of AZ61 magnesium alloy. Journal of Rare Earths, 2015, 33(1): 86–92.
Wang C L, Dai J C, Liu W C, et al. Effect of Al additions on grain refinement and mechanical properties of Mg-Sm alloys. Journal of Alloys and Compounds, 2015, 620: 172–179.
Guan K, Li B S, Yang Q, et al. Effects of 1.5 wt% samarium (Sm) addition on microstructures and tensile properties of a Mg-6.0Zn-0.5Zr alloy. Journal of Alloys and Compounds, 2018, 735: 1737–1749.
Hu Z, Liu R L, Kairy S K, et al. Effect of Sm additions on the microstructure and corrosion behavior of magnesium alloy AZ91. Corrosion Science, 2019, 149: 144–152.
Hu Z, Li X, Hua Q, Yan H. Effects of Sm on microstructure and corrosion resistance of hot-extruded AZ61 magnesium alloys. Journal of Materials Research, 2015, 30: 3671–3681.
Hu Y, Yu Nan, Zhao L Z, et al. Effect of Sm on the microstructure and properties of Mg-9Al alloy. International Journal of Cast Metals Research, 2017: 1–5.
Li X, Hu Z, Yan H, et al. Effect of Sm-Rich phase on corrosion behavior of hot extruded AZ31-1.5Sm magnesium alloy. Journal of Materials Engineering and Performance, 2018: 1–11.
Hu X Y, Fu P H, StJohn D, e al. On grain coarsening and refining of the Mg-3Al alloy by Sm. Journal of Alloys and Compounds, 2016, 663: 387–394.
Zhang X M, Hu J L, Ye L Y, et al. Effects of Si addition on microstructure and mechanical properties of Mg-8Gd-4Y-Nd-Zr alloy. Materials & Design, 2013, 43: 74–79.
Lü Y Z, Wang Q D, Zeng X Q, et al. Effects of silicon on microstructure, fluidity, mechanical properties, and fracture behaviour of Mg-6Al alloy. Materials Science and Technology, 2001, 17(2): 207–214.
Lu Y Z, Wang Q D, Zeng X Q, et al. Effect of Si on the precipitation behavior of Mg-6Al alloy. Journal of Materials Science Letters, 2001, 20(5): 397–399.
Li S S, Tang B, Zeng D B. Effects and mechanism of Ca on refinement of AZ91D alloy. Journal of Alloys and Compounds, 2007, 437(1–2): 317–321.
Kawabata H, Yagi Y, Aoki Y, et al. Effect of Calcium on the combustion behavior of molten AZ91 magnesium alloy. Materials Transactions, 2018, 59(2): 272–279.
Yue C F, Huang S J, Chen J K, et al. Effects of neodymium and calcium on the thermal stability of AZ71 magnesium alloys. Metals and Materials International, 2018, 24(2): 307–313.
Easton M A, Qian M, Prasad A, et al. Recent advances in grain refinement of light metals and alloys. Current Opinion in Solid State and Materials Science, 2016, 20(1): 13–24.
Braszczyńska-Malik K N. Discontinuous and continuous precipitation in magnesium-aluminium type alloys. Journal of Alloys and Compounds, 2009, 477(1–2): 870–876.
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was financially supported by the National Key Research and Development Program of China (2016YFB0701204).
Hai Hao Male, born in 1969, Ph.D., Professor. His research interests mainly focus on solidification control, casting technology of light metals and porous materials. He has published more than one hundred scientific and technical papers.
Rights and permissions
About this article
Cite this article
Bonnah, R.C., Fu, Y. & Hao, H. Microstructure and mechanical properties of AZ91 magnesium alloy with minor additions of Sm, Si and Ca elements. China Foundry 16, 319–325 (2019). https://doi.org/10.1007/s41230-019-9067-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41230-019-9067-9