Abstract
The present research work reports the fabrication and evaluation of the mechanical properties of hybrid aluminium matrix composites (HAMC). Aluminium 7075 (Al7075) alloy was reinforced with particles of boron carbide (B4C) and coconut shell fly ash (CSFA). Al7075 matrix composites were fabricated by stir casting method. The samples of Al7075 HAMC were fabricated with different weight percentages of (0, 3, 6, 9 and 12wt.%) B4C and 3wt.% of CSFA. The mechanical properties discussed in this work are hardness, tensile strength, and impact strength. Hardness of the composites increased 33% by reinforcements of 12wt.% B4C and 3wt.% CSFA in aluminium 7075 alloy. The tensile strength of the composites increased 66% by the addition of 9wt.% B4C and 3wt.% CSFA in aluminium 7075 alloy. Further addition of reinforcements decreased the tensile strength of the composites. Elongation of the composites decreased while increasing B4C and CSFA reinforcements in the matrix. The impact energy of the composites increased up to 2.3 J with 9wt.% B4C and 3wt.% CSFA addition in aluminium alloy. Further addition of reinforcement decreased the impact strength of the composites. The optical micrographs disclosed the homogeneous distribution of reinforcement particles (B4C and CSFA) in Al7075 matrix. The homogeneously distributed B4C and CSFA particles added as reinforcement in the Al7075 alloy contributed to the improvement of hardness, tensile strength, and impact strength of the composites.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Shalaby E A, Churyumov A Y, Solonin A N, et al. Preparation and characterization of hybrid A359/(SiC+Si3N4) composites synthesized by stir/squeeze casting techniques. Materials Science and Engineering: A, 2016, 674: 18–24.
Baradeswaran A, Perumal A E. Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites. Composites Part B: Engineering, 2013, 54: 146–152.
Surappa M K. Aluminium matrix composites challenges and opportunities. Sadhana, 2003, 28(1–2): 319–334.
Zhang X F, Wang D J, Xie G. Manufacturing of aluminum/fly ash composite with liquid reactive sintering technology. Acta Metallurgica Sinica English Letters, 2009, 15(5): 465–470.
Dinaharan I, Kalaiselvan K, Murugan N. Influence of rice husk ash particles on microstructure and tensile behavior of AA6061 aluminum matrix composites produced using friction stir processing. Composites Communications, 2017, 3: 42–46.
Kumar G V, Rao C S P, Selvaraj N, et al. Studies on Al6061–SiC and Al7075–Al2O3 metal matrix composites. Journal of Minerals and Materials Characterization and Engineering, 2010, 9(1): 43–55.
Senthilvelan T, Gopalakannan S, Vishnuvarthan S, et al. Fabrication and characterization of SiC, Al2O3 and B4C reinforced Al–Zn–Mg–Cu alloy (Al7075) metal matrix composites: A study. Advanced Materials Research, 2013, 622: 1295–1299.
Baradeswaran A, Perumal A E. Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites. Composites Part B: Engineering, 2014, 56: 464–471.
Alaneme K K, Sanusi K O. Microstructural characteristics mechanical and wear behaviour of aluminium matrix hybrid composites reinforced with alumina, rice husk ash and graphite. Engineering Science and Technology, an International Journal, 2015, 18(3): 416–422.
Reddy P S, Kesavan R, Ramnath B V. Investigation of mechanical properties of aluminium 6061–silicon carbide, boron carbide metal matrix composite. Silicon, 2018, 10(2): 495–502.
Singh J, Chauhan A. Characterization of hybrid aluminum matrix composites for advanced applications–A review. Journal of Materials Research and Technology, 2016, 5(2): 159–169.
Prasad D S, Shoba C, Ramanaiah N. Investigations on mechanical properties of aluminum hybrid composites. Journal of Materials Research and Technology, 2014, 3(1): 79–85.
Venkat Prasat S, Subramanian R. Tribological properties of AlSi10Mg/ fly ash/graphite hybrid metal matrix composites. Industrial Lubrication and Tribology, 2013, 65(6): 399–408.
Ramnath B V, Elanchezhian C, Jaivignesh M, et al. Evaluation of mechanical properties of aluminium alloy–alumina–boron carbide metal matrix composites. Materials & Design, 2014, 58: 332–338.
Rao V D P, Geethika V N, Krishnaveni P S. Multi–objective Optimization of Mechanical Properties of Aluminium 7075–Based Hybrid Metal Matrix Composite Using Genetic Algorithm. Advances in 3D Printing & Additive Manufacturing Technologies, 2017,–79–93.
Shorowordi K M, Laoui T, Haseeb A S M A, et al. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study. Journal of Materials Processing Technology, 2003, 142(3): 738–743.
Chelladurai S J S, Arthanari R, Nithyanandam N, et al. Investigation of mechanical properties and dry sliding wear behaviour of squeeze cast LM6 aluminium alloy reinforced with copper coated short steel fibers. Transactions of the Indian Institute of Metals, 2018, 71(4): 813–822.
Poddar P, Srivastava V C, De P K, et al. Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering: A, 2007, 460: 357–364.
Shankar S, Balaji A, Kawin N. Investigations on mechanical and tribological properties of Al–Si10–Mg alloy/sugarcane bagasse ash particulate composites. Particulate Science and Technology, 2018, 36(6): 762–770.
Ravi B, Naik B B, Prakash J U. Characterization of aluminium matrix composites (AA6061/B4C) fabricated by stir casting technique. Materials Today, 2015, 2(4–5): 2984–2990.
Karthikeyan A, Nallusamy S. Experimental analysis on sliding wear behaviour of aluminium–6063 with SiC particulate composites. International Journal of Engineering Research in Africa, 2017, 31: 36–43.
Bhushan R K, Kumar S, Das S. Fabrication and characterization of 7075 Al alloy reinforced with SiC particulates. The International Journal of Advanced Manufacturing Technology, 2013, 65(5–8): 611–624.
Amuda O S, Ibrahim A O. Industrial wastewater treatment using natural material as adsorbent. African Journal of Biotechnology, 2006, 5(16): 1483–1487.
Jiang J, Wang Y. Microstructure and mechanical properties of the rheoformed cylindrical part of 7075 aluminum matrix composite reinforced with nano–sized SiC particles. Materials & Design, 2015, 79: 32–41.
Ilandjezian R, Gopalakannan S. Mechanical and Micro–Structural Behavior of Lignite Coal Based Fly–Ash and Microsphere Reinforced Al 6061 Metal Matrix Composite. Applied Mechanics and Materials, 2016, 852: 123–129.
Ravindran P, Manisekar K, Narayanasamy P, et al. Application of factorial techniques to study the wear of Al hybrid composites with graphite addition. Materials & Design, 2012, 39: 42–54.
American Association of State Highway and Transportation Officials, & American Society for Testing and Materials. E8M–04 Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2008.
Boopathi M M, Arulshri K P, Iyandurai N. Evaluation of mechanical properties of aluminium alloy 2024 reinforced with silicon carbide and fly ash hybrid metal matrix composites. American Journal of Applied Sciences, 2013, 10(3): 219.
Rao T B. An experimental investigation on mechanical and wear properties of Al7075/SiCp composites: effect of SiC content and particle size. Journal of Tribology, 2018, 140(3): 031601–031601––8.
Patidar D, Rana R S. Effect of B4C particle reinforcement on the various properties of aluminium matrix composites: a survey paper. Materials Today: Proceedings, 2017, 4(2): 2981–2988.
Gireesh C H, Prasad K D, Ramji K, et al. Mechanical Characterization of Aluminium Metal Matrix Composite Reinforced with Aloe vera powder. Materials Today: Proceedings, 2018, 5(2): 3289–3297.
Balasubramanian I, Maheswaran R. Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir–cast AA6063/ SiC composites. Materials & Design, 2015, 65: 511–520.
Ghandvar H, Farahany S, Idris M H. Effect of wettability enhancement of SiC particles on impact toughness and dry sliding wear behavior of compocasted A356/20SiCp composites. Tribology Transactions, 2018, 61(1): 88–99.
Author information
Authors and Affiliations
Corresponding author
Additional information
Balasubramani Subramaniam Male, born in 1984, Assistant Professor. His research interests mainly focus on the manufacturing and testing of metal matrix composites.
Rights and permissions
About this article
Cite this article
Subramaniam, B., Natarajan, B., Kaliyaperumal, B. et al. Investigation on mechanical properties of aluminium 7075 - boron carbide - coconut shell fly ash reinforced hybrid metal matrix composites. China Foundry 15, 449–456 (2018). https://doi.org/10.1007/s41230-018-8105-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41230-018-8105-3