Abstract
Lithium-metal batteries (LMBs) with high energy densities have aroused intensive interest in electrical energy storage devices but suffer from the risk of thermal runaway, especially under harsh conditions of high temperature or thermal abuse. Pursuing intrinsically thermally stable electrolytes with higher performance and higher safety beyond commercial liquid electrolytes is a major challenge in this field. Here we report on a unique, highly durable sulfolane-based gel electrolyte constructed by a facile gelling strategy. This method takes advantages of thermotolerant sulfolane as a plasticizer and strong dipole-dipole interactions to achieve the gelation of polymer polyvinylidene fluoride/polyethylene oxide. We systematically investigated the influence of gelled sulfolane on gel formation, lithium plating/stripping, and solid electrolyte interphase. Benefiting from favorable interface engineering, the sulfolane-based gel electrolyte remarkably enhances the cyclic and safety performances of LMBs. When used in the Li/LiCoO2 battery, the resulting gel electrolyte enables long-term cycling stability at high temperatures up to 90°C. Moreover, the thermal safety of practical Li/LiCoO2 pouch cells (up to 190°C) has also been demonstrated by accelerating rate calorimetry. These results contribute to the development of high-safety LMBs that require abuse tolerance, high energy, and long calendar life.
摘要
高能量密度锂金属电池在电化学储能领域受到了广泛关注, 但其存在热失控的风险. 尤其在高温或热滥用等恶劣条件下, 安全隐患更加凸显. 研发本征热稳定、 高安全电解质是该领域的一个主要挑战. 在该工作中, 我们提出了一种简单易操作的凝胶化策略, 制备出独特的、 高热稳定的环丁砜基凝胶电解质. 采用耐高温环丁砜作为增塑剂, 通过强偶极-偶极相互作用, 实现了聚偏氟乙烯/聚环氧乙烷基质之间的凝胶化, 并系统地研究了砜基凝胶对凝胶化过程、 锂沉积/剥离和固态电解质界面的影响. 由于良好的界面特性, 砜基凝胶电解质显著提高了锂金属电池的长循环和安全性能. 由凝胶电解质组装的Li/LiCoO2电池, 在高温(高达90°C)条件下仍然呈现出优异的循环稳定性. 此外, 通过加速量热仪证实了Li/LiCoO2软包电池的高热安全性(>190°C). 该研究工作为开发耐滥用、高比能和长寿命的高安全性锂金属电池提供了新方法.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bresser D, Hosoi K, Howell D, et al. Perspectives of automotive battery R&D in China, Germany, Japan, and the USA. J Power Sources, 2018, 382: 176–178
Li H. Practical evaluation of Li-ion batteries. Joule, 2019, 3: 911–914
Cheng XB, Zhang R, Zhao CZ, et al. Toward safe lithium metal anode in rechargeable batteries: A review. Chem Rev, 2017, 117: 10403–10473
Tarascon JM, Armand M. Issues and challenges facing rechargeable lithium batteries. Nature, 2001, 414: 359–367
Liu H, Wei Z, He W, et al. Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review. Energy Convers Manage, 2017, 150: 304–330
Wang L, Zhou Z, Yan X, et al. Engineering of lithium-metal anodes towards a safe and stable battery. Energy Storage Mater, 2018, 14: 22–48
Campion CL, Li W, Lucht BL. Thermal decomposition of LiPF6-based electrolytes for lithium-ion batteries. J Electrochem Soc, 2005, 152: A2327
Zu C, Yu H, Li H. Enabling the thermal stability of solid electrolyte interphase in Li-ion battery. InfoMat, 2021, 3: 648–661
Koch S, Fill A, Birke KP. Comprehensive gas analysis on large scale automotive lithium-ion cells in thermal runaway. J Power Sources, 2018, 398: 106–112
Wang Q, Sun J, Yao X, et al. Thermal behavior of lithiated graphite with electrolyte in lithium-ion batteries. J Electrochem Soc, 2005, 153: A329
Wu Y, Wang S, Li H, et al. Progress in thermal stability of all-solid-state-Li-ion-batteries. InfoMat, 2021, 3: 827–853
Hou LP, Zhang XQ, Li BQ, et al. Cycling a lithium metal anode at 90 °C in a liquid electrolyte. Angew Chem Int Ed, 2020, 132: 15221–15225
Hou J, Yang M, Wang D, et al. Fundamentals and challenges of lithium ion batteries at temperatures between −40 and 60 °C. Adv Energy Mater, 2020, 10: 1904152
Geng Z, Lu J, Li Q, et al. Lithium metal batteries capable of stable operation at elevated temperature. Energy Storage Mater, 2019, 23: 646–652
Yang H, Guo C, Chen J, et al. An intrinsic flame-retardant organic electrolyte for safe lithium-sulfur batteries. Angew Chem Int Ed, 2019, 58: 791–795
Xu C, Hernández G, Abbrent S, et al. Unraveling and mitigating the storage instability of fluoroethylene carbonate-containing LiPF6 electrolytes to stabilize lithium metal anodes for high-temperature rechargeable batteries. ACS Appl Energy Mater, 2019, 2: 4925–4935
Wang J, Yamada Y, Sodeyama K, et al. Fire-extinguishing organic electrolytes for safe batteries. Nat Energy, 2018, 3: 22–29
Alvarado J, Schroeder MA, Zhang M, et al. A carbonate-free, sulfone-based electrolyte for high-voltage Li-ion batteries. Mater Today, 2018, 21: 341–353
Xu K. Electrolytes and interphases in Li-ion batteries and beyond. Chem Rev, 2014, 114: 11503–11618
Tong B, Song Z, Wan H, et al. Sulfur-containing compounds as electrolyte additives for lithium-ion batteries. InfoMat, 2021, 3: 1364–1392
Ren X, Chen S, Lee H, et al. Localized high-concentration sulfone electrolytes for high-efficiency lithium-metal batteries. Chem, 2018, 4: 1877–1892
Fu J, Ji X, Chen J, et al. Lithium nitrate regulated sulfone electrolytes for lithium metal batteries. Angew Chem Int Ed, 2020, 132: 22378–22385
Cao X, Jia H, Xu W, et al. Review—Localized high-concentration electrolytes for lithium batteries. J Electrochem Soc, 2021, 168: 010522
Adams BD, Zheng J, Ren X, et al. Accurate determination of coulombic efficiency for lithium metal anodes and lithium metal batteries. Adv Energy Mater, 2018, 8: 1702097
Li J, Xi J, Song Q, et al. Microporous polymer electrolyte based on PVDF-PEO. Chin Sci Bull, 2005, 50: 368–370
Xi J, Qiu X, Li J, et al. PVDF-PEO blends based microporous polymer electrolyte: Effect of PEO on pore configurations and ionic conductivity. J Power Sources, 2006, 157: 501–506
Bae J, Qian Y, Li Y, et al. Polar polymer-solvent interaction derived favorable interphase for stable lithium metal batteries. Energy Environ Sci, 2019, 12: 3319–3327
Dhatarwal P, Sengwa RJ. Polymer compositional ratio-dependent morphology, crystallinity, dielectric dispersion, structural dynamics, and electrical conductivity of PVDF/PEO blend films. Macromol Res, 2019, 27: 1009–1023
Wu QY, Chen XN, Wan LS, et al. Interactions between polyacrylonitrile and solvents: Density functional theory study and two-dimensional infrared correlation analysis. J Phys Chem B, 2012, 116: 8321–8330
Shkrob IA, Zhu Y, Marin TW, et al. Mechanistic insight into the protective action of bis(oxalato)borate and difluoro(oxalate)borate anions in Li-ion batteries. J Phys Chem C, 2013, 117: 23750–23756
Rodrigo ND, Tan S, Shadike Z, et al. Improved low temperature performance of graphite/Li cells using isoxazole as a novel cosolvent in electrolytes. J Electrochem Soc, 2021, 168: 070527
Yan K, Wang J, Zhao S, et al. Temperature-dependent nucleation and growth of dendrite-free lithium metal anodes. Angew Chem Int Ed, 2019, 131: 11486–11490
Lu D, Xu G, Hu Z, et al. Deciphering the interface of a high-voltage (5 V-class) Li-ion battery containing additive-assisted sulfolane-based electrolyte. Small Methods, 2019, 3: 1900546
Sun HH, Dolocan A, Weeks JA, et al. In situ formation of a multi-component inorganic-rich SEI layer provides a fast charging and high specific energy Li-metal battery. J Mater Chem A, 2019, 7: 17782–17789
Jurng S, Brown ZL, Kim J, et al. Effect of electrolyte on the nanostructure of the solid electrolyte interphase (SEI) and performance of lithium metal anodes. Energy Environ Sci, 2018, 11: 2600–2608
Acknowledgements
This work was financially supported by the National Natural Science Foundation of China (51972132 and 51772116), and the Program for Huazhong University of Science and Technology Academic Frontier Youth Team (HUST, 2016QYTD04). The authors thank the Analytical and Testing Center of HUST for the FTIR, XRD and SEM measurements.
Author information
Authors and Affiliations
Contributions
Hu X conceived the idea of this work and revised the manuscript; Yu X conducted the experiments and data analysis and wrote the manuscript. All authors contributed to the general discussion.
Corresponding author
Additional information
Supplementary information Supporting data are available in the online version of the paper.
Conflict of interest
The authors declare that they have no conflict of interest.
Xinrun Yu is currently a PhD candidate at the School of Materials Science and Engineering, Huazhong University of Science and Technology (HUST) under the supervision of Prof. Xianluo Hu. His research interests focus on advanced electrolytes for high-temperature electrochemical energy storage devices.
Xianluo Hu is a full professor of materials science and engineering at HUST. He received his PhD degree from the Chinese University of Hong Kong (CUHK) in 2007 and subsequently worked as a postdoctoral researcher at CUHK and a JSPS (Japan Society for the Promotion of Science) postdoctoral fellow at the National Institute of Materials Science (NIMS) of Japan from 2007 to 2009. His current research interests focus on safe lithium batteries under extreme conditions.
Rights and permissions
About this article
Cite this article
Yu, X., Hu, X. Interface engineering by gelling sulfolane for durable and safe Li/LiCoO2 batteries in wide temperature range. Sci. China Mater. 65, 2967–2974 (2022). https://doi.org/10.1007/s40843-022-2101-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40843-022-2101-2