Abstract
Poly(vinyl alcohol)/hydroxyapatite(PVA/HA) composite hydrogel was successfully in-situ synthesized via three cycles of freezing-thawing. The composition and structure of products were investigated by X-ray diffraction(XRD), Fourier transformed infrared spectroscopy(FTIR) and scanning electron microscopy(SEM). The influence of different preparation methods and contents of material on the mechanical properties of PVA/HA composite hydrogel was discussed through tensile and compressive tests. The template of PVA could avoid the agglomeration of HA particles, which improves the mechanical properties of the composite hydrogel effectively. The tensile strength, modulus and compressive performances of the PVA/HA composite hydrogel prepared by the in-situ synthesis method were better than those of hydrogel obtained by the simple blend method. In addition, the effect of the content of PVA, HA, and the pH value on the properties of the PVA/HA composite hydrogel has been discussed in detail.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Slaughter B. V., Khurshid S. S., Fisher O. Z., Khademhosseini A., Peppas N. A., Advanced Materials, 2009, 21(32/33), 3307
Spiller K. L., Holloway J. L., Gribb M. E., Lowman A. M., J. Tissue Eng. Regen. M, 2011, 5(8), 636
Zhang H. J., Xia H. S., Zhao Y., ACS Macro Lett., 2012, 1(11), 1233
Stammen J. A., Williams S., Ku D. N., Guldberg R. E., Biomaterials, 2001, 22(8), 799
Kumar A., Han S. S., Int. J. Polym. Mater. Po., 2017, 66(4), 159
Kamoun E. A., Chen X., Eldin M. S. M., Kenawy E. R. S., Arab. J. Chem., 2015, 8(1), 1
Zhang L., Zhao J., Zhu J. T., He C. C., Wang H. L., Soft Matter., 2012, 8(40), 10439
Baker M. I., Walsh S. P., Schwartz Z., Boyan B. D., J. Biomed. Mater. Res. B, 2012, 100B(5), 1451
Bhowmick S., Koul V., Mat. Sci. Eng. C: Mater., 2016, 59, 109
Moreau D., Villain A., Ku D. N., Corte L., Biomatter, 2014, 4, e28764
Ferraz M. P., Monteiro F. J., Manuel C. M., Journal of Applied Biomaterials & Biomechanics(JABB), 2004, 2(2), 74
Xu F., Li Y., Wang X., Wei J., Yang A., Journal of Materials Science, 2004, 39(18), 5669
Maiolo A. S., Amado M. N., Gonzalez J. S., Alvarez V. A., Materials Science & Engineering C, 2012, 32(6), 1490
Li W., Wang D., Yang W., Song Y., RSC Advances, 2016, 6(24), 20166
Sinha A., Das G., Sharma B. K., Roy R. P., Pramanick A. K., Nayar S., Mat. Sci. Eng. C: Bio. S, 2007, 27(1), 70
Nayar S., Pramanick A. K., Sharma B. K., Das G., Kumar B. R., Sinha A., J. Mater. Sci.-Mater. M, 2008, 19(1), 301
Pang Y. X., Bao X., Journal of the European Ceramic Society, 2003, 23(10), 1697
Poursamar S. A., Rabiee M., Samadikuchaksaraei A., Tahriri M., Karimi M., Azami M., J. Ceram. Process Res., 2009, 10(5), 679
Sang S. B., Wu Q. M., Gan Z., Electrochim. Acta, 2008, 53(15), 5065
Swain S. K., Bhattacharyya S., Mat. Sci. Eng. C: Mater., 2013, 33(1), 67
Pan Y. S., Xiong D. S., J. Wuhan Univ. Technol., 2010, 25(3), 474
Gupta S., Webster T. J., Sinha A., J. Mater. Sci.-Mater. M, 2011, 22(7), 1763
Paradossi G., Cavalieri F., Chiessi E., Spagnoli C., Cowman M. K., J. Mater. Sci.-Mater. M, 2003, 14(8), 687
Gu Z. Q., Xiao J. M., Zhang X. H., Bio-Medical Materials and Engineering, 1998, 8(2), 75
Sardinha V. M., Lima L. L., Belangero W. D., Zavaglia C. A., Bavaresco V. P., Gomes J. R., Wear, 2013, 301(1/2), 218
Sinha A., Guha A., Mat. Sci. Eng. C: Bio S., 2009, 29(4), 1330
Hassan C. M., Peppas N. A., Adv. Polym. Sci., 2000, 153, 37
Mansur H. S., Orefice R. L., Mansur A. A. P., Polymer, 2004, 45(21), 7193
Mansur H. S., Sadahira C. M., Souza A. N., Mansur A. A. P., Mat. Sci. Eng. C: Bio. S, 2008, 28(4), 539
Gonzalez J. S., Alvarez V. A., Journal of the Mechanical Behavior of Biomedical Materials, 2014, 34, 47
Lee Y. J., Lee G. H., Hwang J. S., Jeong S. W., Kim H. C., Kim E., Oh T. H., Lee S. J., Lee S. G., Fiber Polym., 2016, 17(4), 502
Tudorachi N., Chiriac A. P., J. Polym. Environ., 2011, 19(2), 546
Pan Y., Xiong D., Journal of Materials Science Materials in Medicine, 2009, 20(6), 1291
Wei Q., Wang Y., Li X., Yang M., Chai W., Wang K., Zhang Y., Journal of the Mechanical Behavior of Biomedical Materials, 2016, 57, 190
Nugent M. J. D., Hanley A., Tomkins P. T., Higginbotham C. L., J. Mater. Sci.-Mater. M, 2005, 16(12), 1149
Chen Y. N., Peng L., Liu T., Wang Y., Shi S., Wang H., ACS Applied Materials & Interfaces, 2016, 8(40), 27199
Ma R., Xiong D., Miao F., Zhang J., Peng Y., Materials Science & Engineering C, 2009, 29(6), 1979
Zhang D. K., Wang D. G., Duan J. J., Ge S. R., J. Bionic. Eng., 2009, 6(1), 22
Pan Y. S., Xiong D. S., Gao F., J. Mater. Sci.-Mater. M, 2008, 19(5), 1963
Ricciardi R., Auriemma F., Gaillet C., de Rosa C., Lauprêtre F., Macromolecules, 2004, 37(25), 9510
Jin R., Teixeira L. S. M., Dijkstra P. J., Karperien M., Zhong Z., Feijen J., J. Control. Release, 2008, 132(3), E24
Pan Y., Xiong D., Chen X., Journal of Materials Science, 2007, 42(13), 5129
Yang Y., Wang X., Yang F., Shen H., Wu D., Advanced Materials, 2016, 28(33), 7178
Sun Y., Xiang N., Jiang X., Hou L., Materials Letters, 2017, 194, 34
Author information
Authors and Affiliations
Corresponding authors
Additional information
Supported by the Science and Technology Development Plan of Changchun, China(No.17DY019) and the Cooperative Project of Changchun JA Biotech Co., Ltd. and Jilin University, China(No.3R116W751412).
Rights and permissions
About this article
Cite this article
Meng, D., Zhou, X., Zheng, K. et al. In-situ Synthesis and Characterization of Poly(vinyl alcohol)/Hydroxyapatite Composite Hydrogel by Freezing-thawing Method. Chem. Res. Chin. Univ. 35, 521–529 (2019). https://doi.org/10.1007/s40242-019-8341-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40242-019-8341-0