Abstract
Two diallylamine salts, diallylammonium acetate (DAA acetate) and diallylguanidinium acetate (DAGA) were cyclocopolymerized in water with acrylonitrile (AN) using power ultrasound in order to prepare acrylonitrile copolymers involving thermally stable heterocyclic rings in their polymeric matrix. The structural characterization of the copolymers was performed using FTIR, \(^{13}\)C NMR, UV/Vis spectroscopy and elemental analysis. The results revealed that the diallyl amine salts cyclopolymerized to form pyrrolidine and not piperidine rings throughout the polymeric chains. The thermal behavior of the copolymers prepared under nitrogen atmosphere was investigated using thermogravimetry, differential thermal analysis (TGA/DTA) and differential scanning calorimetry. The morphological property was also discussed using scanning electron microscopy (ESEM). The results revealed that the thermal stability of the copolymers was improved by the increase in the content of N,N-diallylammonium and N,N-diallylguanidinium acetate. The power of ultrasonic waves enhanced the homogeneity of the copolymers blend films irrespective of the copolymer compositions.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Abdel-Naby, A.: Copolymerization of acrylonitrile with N(substituted phenyl) itaconimide. J. Appl. Polym. Sci. 121, 169–175 (2011)
Korobeinyk, A.; Whitby, R.; Mikhalovsky, S.: High temperature oxidative resistance of polyacrylonitrile-methylmethacrylate copolymer powder converting to a carbonized monolith. Eur. Polym. J. 48, 97–104 (2012)
Tan, J.; Wang, X.; Tai, J.; Luo, Y.; Jia, D.: Novel blends of acrylonitrile butadiene rubber and polyurethane-silica hybrid networks. Expr. Polym. Lett. 6, 588–600 (2012)
Bajaj, P.; Sreekumar, T.; Sen, K.: Thermal behaviour of acrylonitrile copolymers having methacrylic and itaconic acid comonomers. Polymer 24, 1707–1718 (2001)
Sabaa, M.; Mikhael, M.; Yassin, A.; Elsabeè, M.: Copolymerization of acrylonitrile with N-substituted maleimides. Die. Angew. Makromol. Chem. 139, 95–112 (1986)
Abdel-Naby, A.: Ultrasound assisted copolymerization of acrylonitrile with N-amino phenyl maleimides and N-amino phenyl 2,3 dimethyl maleimides. Ultrason. Sonochem. 19, 1180–1185 (2012)
Butler, G.B.; Ingley, F.: Preparation and polymerization of unsaturated quaternary ammonium compounds. II. Halogenated allyl derivatives\(^{1,2}\). J. Am. Chem. Soc. 73, 895–896 (1951)
Kadem, K.: Cyclopolymerization of diallyamine and its condensation with carboxylic drugs. Int. J. Chem. Sci. 13(2), 725–736 (2015)
Ali, Sh; Goni, L.; Mazumder, M.: Butler’s cyclopolymerizaton protocol in the synthesis of diallylamine salts/sulfur dioxide alternate polymers containing amino acid residues. J. Polym. Res. 24(184), 1–12 (2017)
Ali, Sh; Al-Hamouz, O.: Synthesis and cyclopolymerization of diallylammoniomethanesulfonate. Polym. Eng. Sci. 53, 2378–2388 (2013)
Zaikov, G.; Malkanduev, Y.U.; Khashirova, S.; Esmurziev, A.; Mortynenko, A.; Sivova, L.; Sivov, N.: Synthesis and potential radical copolymerization of new monomers based on diallylamine. J. Appl. Sci. 91, 439–444 (2001)
Vivekanandam, T.; Gopalan, A.; Vasudevan, T.; Umapathy, S.: Sonochemical cyclopolymerization of diallylamine in the presence of peroxomonosulfate. J. Appl. Polym. Sci. 98, 1548–1553 (2005)
Kamel, M.; Helmy, H.; Mashaly, H.; Kafafy, H.: Ultrasonic assisted dyeing: dyeing of acrylic fabrics C.I. Astrazon basic red 5BL 200%. Ultrason Sonochem. 17, 92–97 (2010)
Abdel-Naby, A.; Al-Harthi, S.: Dyeability and mechanical properties of acrylonitrile–diallylamine salts copolymers. Am. J. Appl. Sci. 10, 525–532 (2013)
Sivov, N.; Martynenko, A.; Bondarenko, G.; Filatova, M.; Kabanova, E.; Popova, N.; Sivo, A.; Kruts’ko, E.: Structure and composition of guanidine acrylate, guanidine methacrylate, their homopolymers, and copolymers with diallyldimethylammonium chloride. Pet. Chem. 46, 41–59 (2006)
Beevers, R.; White, E.: A note on the glass-transition temperatures of acrylonitrile + styrene copolymers. Polym. Lett. 1, 171–176 (1963)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Al-Ghamdi, A.A., Al-Harthi, S.N., EL-Sharif, A.M. et al. Cyclocopolymerization of N,N-Diallylammonium and N,N-Diallylguanidinium Acetate with Acrylonitrile Characterization, Thermal and Morphological Properties. Arab J Sci Eng 44, 6303–6311 (2019). https://doi.org/10.1007/s13369-019-03734-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-019-03734-9