Abstract
This research was focused on the two-step regeneration of Antheraea mylitta (tasar) fibroin in the form of electrospun 3D self-assembled nanofibrous nonwoven mats using ionic liquid and formic acid/CaCl2. The self-assembled structure of tasar nanofibrous nonwoven mats was dependent on the silk fibroin concentration and spinning voltage. The secondary conformation of tasar fibroin protein before and after electrospinning was analyzed by Fourier transformation infrared spectroscopy. The morphology of the nanofibrous mat was studied by scanning electron microscope. The self-assembled 3D tasar nonwoven nanofibrous construct was a highly porous and spongy structure with high water absorption and water vapor transmission. Highly porous 3D self-assembled tasar nonwoven nanofibrous construct favored good growth and proliferation of L929 skin fibroblast cells. Based on these properties, 3D self-assembled tasar nonwoven nanofibrous construct is a promising material for skin tissue engineering and wound dressing applications.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
V. Falanga, Wound Repair Regen., 8, 347 (2000).
T. A. Mustoe, K. O’Shauqhnessy, and O. Kloeters, Plast. Reconstr. Surg., 117, 35S (2006).
K. A. Rieger, N. P. Birch, and J. D. Schiffman, J. Mater. Chem. B, 1, 4531 (2013).
C. M. Srivastava and R. Purwar, J. Appl. Polym. Sci., 134, 1 (2017).
A. Formhals and R. S. Gastell, US1975504 A (1934).
B. Sun, Y. Z. Long, F. Yu, M. M. Li, H. D. Zhang, W. J. Li, and T. X. Xu, Nanoscale, 4, 2134 (2012).
M. Li and Y. Long, Mater. Sci. Forum, 688, 95 (2011).
H. Okuzaki, T. Takahashi, N. Miyajima, Y. Suzuki, and T. Kuwabara, Macromolecules, 39, 4276 (2006).
B. Sun, Y. Z. Long, H. D. Zhang, M. M. Li, J. L. Duvail, X. Y. Jiang, and H. L. Yin, Prog. Polym. Sci., 39, 862 (2014).
C. Acharya, S. K. Ghosh, and S. C. Kundu, Acta Biomater., 5, 429 (2009).
N. Panda, A. Biswas, L. B. Sukla, and K. Pramanik, Appl. Biochem. Biotechnol., 174, 2403 (2014).
P. Bhattacharjee, B. Kundu, D. Naskar, T. K. Maiti, D. Bhattacharya, and S. C. Kundu, 103, 271 (2015).
H. Zhao, X. Ren, Y. Zhang, and L. Huang, Bio-med Mater. Eng., 26, S89 (2015).
C. M. Srivastava and R. Purwar, Mater. Sci. Eng. C, 68, 276 (2016).
B. B. Mandal and S. C. Kundu, Biomaterials, 30, 2956 (2009).
E. S. Gadelmawla, M. M. Koura, T. M. Maksoud, M. ElewaI, and H. H. Soliman, J. Mater. Process Technol., 123, 133 (2002).
S. E. Wharram, X. Zhang, D. L. Kaplan, and S. P. McCarthy, Macromol. Biosci., 10, 246 (2010).
Z. Pei, Q. Sun, X. Sun, Y. Wang, and P. Zhao, Biomed. Mater. Eng., 26, S111 (2015).
M. A. Moraes, R. F. Weska, and M. M. Beppu, J. Biomed. Mater. Res. B: Appl. Biomater., 102, 869 (2014).
J. Ayutsede, M. S. Gandhi, M. Sukigara, H. E. Micklus, and F. K. Chen, Polymer, 46, 1625 (2005).
N. Kasoju, R. R. Bhonde, and U. Bora, J. Tissue Eng. Regen. Med., 3, 539 (2009).
X. Wang, K. Zhang, M. Zhu, H. Yu, Z. Zhou, Y. Chen, and B. S. Hsiao, Polymer, 49, 2755 (2008).
P. Bhattacharjee, B. Kundu, D. Naskar, T. K. Maiti, D. Bhattacharya, and S. C. Kundu, Biopolymers, 103, 271 (2015).
N. N. Panda, A. Biswas, K. Pramanik, and S. Jonnalagadda, J. Biomed. Mater. Res., 103, 971 (2015).
D. Chouhan, B. Chakraborty, S. K. Nandi, and B. B. Mandal, Acta Biomater., 48, 157 (2017).
B. B. Mandal and S. C. Kundu, Macromol. Biosci., 8, 807 (2008).
Y. Zhang and S. J. Park, J. Polym. Sci. B, 55, 1890 (2017).
R. R. Mallepally, M. A. Marin, V. Surampudi, B. Subia, R. R. Rao, S. C. Kundu, and M. A. McHugh, Biomed. Mater., 10, 035002 (2015).
B. Kundu and S. C. Kundu, Biomed. Mater., 8, 55003 (2013).
J. Pan, N. Liu, H. Sun, and F. Xu, PLoS One, 9, e112885 (2014).
J. E. W. Ahlfors and K. L. Billiar, Biomaterials, 28, 2183 (2007).
N. Panda, A. Biswas, L. B. Sukla, and K. Pramanik, Appl. Biochem. Biotechnol., 174, 2403 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Acknowledgments: Authors would like to thank the Council of Scientific and Industrial Research (CSIR-HRDG) for providing SRF grant (08/133(0009)/2014-EMR-I). Authors acknowledge Dr. Amit Misra and coworker Mr. Deepak Sharma, CSIR-CDRI Lucknow for providing lab facilities to carry out cytocompatibility tests.
Rights and permissions
About this article
Cite this article
Srivastava, C.M., Purwar, R. Fabrication of 3D Self-Assembled Nonmulberry Antheraea Mylitta (tasar) Fibroin Nonwoven Mats for Wound Dressing Applications. Macromol. Res. 26, 872–881 (2018). https://doi.org/10.1007/s13233-018-6121-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-018-6121-1