Abstract
A reactive compatibilizer containing flexible segment (RCFS) was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). The RCFS was used as a compatibilizer for the preparation of lignin/polypropylene (PP) wood plastic composites, and the effect of the RCFS on the properties of composites (e.g., mechanical properties, thermal properties, crystal structure, and morphology) were investigated in detail. Experimental results indicated that the lignin/PP composite displayed the best performance with the addition of 2 wt% RCFS. Its impact strength, flexural strength, and modulus were 56.8%, 37.3%, and 20.6%, respectively, which are higher than those of the untreated composites. Moreover, RCFS treatment could also increase the thermal stability, crystallization rate, and degree of crystallinity of lignin/PP composites.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
D. Brouwer, SAMPE J., 36, 18 (2000).
P. Alexy, B. Kosikova, and G. Podstranska, J. Polym., 41, 4901 (2000).
E. Ramires, J. Megiatto Jr.,_C. Gardrat, A. Castellan, and E. Frollini, Bioresour. Technol., 101, 1998 (2010).
A. Bledzki, A. Mamuna, N. Bonniac, and S. Ahmad, Ind. Crops Prod., 37, 427 (2012).
A. Alemdar and M. Sain, Compos. Sci. Technol., 68, 557 (2008).
K. Bledzki, A. Mamun, M. Lucka, and S. Gutowsk, eXPRESS Polym. Lett., 2, 413 (2008).
Z. Guo, A. Gandini, and F. Pla, Polym. Int., 27, 17 (1992).
H. Hatakeyama and T. Hatakeyama, Adv. Polym. Sci., 232, 1 (2010).
R. Thring and J. Breau, Fuel, 75, 795 (1996).
A. Y. Kharade and D. D. Kale, J. Appl. Polym. Sci., 72, 1321 (1999).
R. Pucciariello, V. Villani, and C. Bonini, Polymer, 45, 4159 (2004).
A. V. Maldhure, J. D. Ekhe, and E. Deenadayalan, J. Appl. Polym. Sci., 125, 1701 (2012).
M. Kazayawok, J. J. Balatinecs, and L. M. Matuana, J. Mater. Sci., 34, 6189 (1999).
M. Chaharmahali, M. Tajvidi, and S. K. Najafi, Polym. Compos., 29, 606 (2008).
M. N. Ichazo, C. Albano, J. Gonzalez, R. Perera, and M. V. Candal, Compos. Struct., 54, 207 (2001).
G. Toriz, F. Denes, and R. A. Young, Polym. Compos., 23, 806 (2002).
C. Xiong, R. Qi, and Y. Wang, J. Appl. Polym. Sci., 114, 1160 (2009).
X. Zhou, X. Xie, and R. Li, Mater. Sci. Technol., 13, 329 (2005).
M. N. Ichazo, C. Albano, J. Gonzalez, R. Perera, and M. V. Candal, Compos. Struct., 54, 207 (2001).
A. V. Maldhure, A. R. Chaudhari, and J. D. Ekhe, J. Therm. Anal. Calorim., 103, 625 (2011).
B. M. Wood, S. R. Coles, S. Maggs, J. Meredith, and K. Kirwan, Compos. Sci. Technol., 71, 1804 (2011).
X. Yue, F. Chen, and X. Zhou, J. Macromol. Sci. Part B: Phys., 51, 242 (2012).
C. Kum, Y. T. Sung, Y. Kim, H. Lee, W. Kim, H. Lee, and H. Yoon, Macromol. Res., 15, 308 (2007).
T. Yoo, H. Yoon, S. Choi, M. Kim, Y. Kim, and W. Kim, Macromol. Res., 18, 583 (2010).
Author information
Authors and Affiliations
Corresponding authors
Additional information
These authors contributed equally to this study.
Rights and permissions
About this article
Cite this article
Xu, X., He, Z., Lu, S. et al. Enhanced thermal and mechanical properties of lignin/polypropylene wood-plastic composite by using flexible segment-containing reactive compatibilizer. Macromol. Res. 22, 1084–1089 (2014). https://doi.org/10.1007/s13233-014-2161-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-014-2161-3