Abstract
In the past decades, glass/PDMS-based microfluidic systems have been rapidly developed to provide homogenous and stable microenvironment for culturing cells. Although these excellent demonstrations involve much simplified operations than traditional cell culture protocol, but they are still not readily accessible to untrained personnel and not appropriate to operate in conventional biological laboratories. In this work, cellulose filter papers were used for the substrates of the cell culture microfluidic system, which provides a convenient tool for cell-based assay. A paper was patterned with culture areas and channels by wax printing technique. Medium or tested substance can be passively perfused to the culture areas. Analyses of cyto-compatibility, cell proliferation, cell morphology, and cell chemosensitivity were performed to confirm the possibility of the paper-based system. The culture system could provide a platform for a wide range of cell-based assays with applications in drug screening and quantitative cell biology. This work demonstrated a paper-based cell culture microfluidic system and the system is inexpensive, disposable, and compatible to the existing culture facility.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Abbot, A. Cell culture: biology’s new dimension. Nature 424, 870–872 (2003).
Cukierman, E., Pankov, R., Stevens, D.R. & Yamada, K.M. Taking cell-matrix adhesions to the third dimension. Science 294, 1708–1712 (2001).
Huh, D., Hamilton, G.A. & Ingber, D.E. From 3D cell culture to organs-on-chips. Trends Cell Biol. 21, 745–754 (2011).
Benya, P.D. & Shaffer, J.D. Dedifferentiated chondrocytes reexpress the differentiated collagen phenotype when cultured in agarose gels. Cell 30, 215–224 (1982).
Lei, K.F. Microfluidic systems for diagnostic applications: a review. JALA 17, 330–347 (2012).
Kim, L., Toh, Y.C., Voldman, J. & Yu, H. A practical guide to microfluidic perfusion culture of adherent mammalian cells. Lab Chip 7, 681–694 (2007).
Hung, P.J. et al. A novel high aspect ratio microfluidic design to provide a stable and uniform microenvironment for cell growth in a high throughput mammalian cell culture array. Lab Chip 5, 44–48 (2005).
Lei, K.F., Wu, M.H., Hsu, C.W. & Chen, Y.D. Realtime and non-invasive impedimetric monitoring of cell proliferation and chemosensitivity in a perfusion 3D cell culture microfluidic chip. Biosens. Bioelectron. 51, 16–21 (2014).
Kim, L., Vahey, M.D., Lee, H.Y. & Voldman, J. Microfluidic arrays for logarithmically perfused embryonic stem cell culture. Lab Chip 6, 394–406 (2006).
Martinez, A.W., Phillips, S.T. & Whitesides, G.M. Diagnostics for the developing world: microfluidic paper-based analytical devices. Anal. Chem. 82, 3–10 (2010).
Mao, X. & Huang, T.J. Microfluidic diagnostics for the developing world. Lab Chip 12, 1412–1416 (2012).
Liu, B., Du, D., Hua, X., Yu, X.Y. & Lin, Y. Paperbased electrochemical biosensors: From test strips to paper-based microfluidics. Electroanalysis 26, 1214–1223 (2014).
Li, X., Ballerini, D.R. & Shen, W. A perspective on paper-based microfluidics: Current status and future trends. Biomicrofluidics 6, 011301 (2012).
Martinez, A.W., Philips, S.T., Wiley, B.J., Gupta, M. & Whitesides, G.M. FLASH: A rapid method for prototyping paper-based microfluidic devices. Lab Chip 8, 2146–2150 (2008).
Carrilho, E., Martinez, A.W. & Whitesides, G.M. Understanding wax printing: A simple micropatterning process for paper-based microfluidics. Anal. Chem. 81, 7091–7095 (2009).
Songjaroen, T., Dungchai, W., Chailapakul, O. & Laiwattanapaisal, W. Novel, simple and low-cost alternative method for fabrication of paper-based microfluidics by wax dipping. Talanta 85, 2587–2593 (2011).
Lu, Y., Shi, W., Jiang, L., Qin, J. & Lin, B. Rapid prototyping of paper-based microfluidics with wax for low-cost, portable bioassay. Electrophoresis 30, 1497–1500 (2009).
Li, X., Tian, J., Nguyen, T. & Shen, W. Paper-based microfluidic devices by plasma treatment. Anal. Chem. 80, 9131–9134 (2006).
Zhao, W., All, M.M., Aguirre, S.D., Brook, M.A. & Li, Y. Paper-based bioassays using gold nanoparticle colorimetric probes. Anal. Chem. 80, 8431–8437 (2008).
Delaney, J.L., Hogan, C.F., Tian, J. & Shen, W. Electrogenerated chemiluminescence detection in paperbased microfluidic sensors. Anal. Chem. 83, 1300–1306 (2011).
Dungchai, W., Chailapakul, O. & Henry, C.S. Use of multiple colorimetric indicators for paper-based microfluidic devices. Anal. Chim. Acta 674, 227–233 (2010).
Park, T.S., Baynes, C., Cho, S.I. & Yoon, J.Y. Paper microfluidics for red wine tasting. RSC Adv. 4, 24356–24362 (2014).
Ellerbee, A.K. et al. Quantifying colorimetric assays in paper-based microfluidic devices by measuring the transmission of light through paper. Anal. Chem. 81, 8447–8452 (2009).
Dungchai, W., Chailapakul, O. & Henry, C.S. Electrochemical detection for paper-based microfluidics. Anal. Chem. 81, 5821–5826 (2009).
Davaji, B. & Lee, C.H. A paper-based calorimetric microfluidics platform for bio-chemical sensing. Bios. Bioelectron. 59, 120–126 (2014).
Zang, D., Ge, L., Yan, M., Song, X. & Yu, J. Electrochemical immunoassay on a 3D microfluidic paperbased device. Chem. Commun. 48, 4683–4685 (2012).
Nie, Z. et al. Electrochemical sensing in paper-based microfluidic devices. Lab Chip 10, 477–483 (2009).
Cheng, C.M. et al. Paper-based ELISA. Angew. Chem. Int. Ed. 49, 4771–4774 (2010).
Murdock, R.C. et al. Optimization of a paper-based ELISA for a human performance biomarker. Anal. Chem. 85, 11634–11642 (2013).
Wang, H.K. et al. Cellulose-based diagnostic devices for diagnosing serotype-2 dengue fever in human serum. Adv. Healthc. Mater. 3, 187–196 (2013).
Derda, R. et al. Paper-supported 3D cell culture for tissue- based bioassays. Proc. Natl. Acad. Sci. U.S.A. 106, 18457–18462 (2009).
Derda, R. et al. Multizone paper platform for 3D cell cultures. PLoS ONE 6, e18940 (2011).
Lei, K.F. & Huang, C.H. Paper-based microreactor integrating cell culture and subsequent immunoassay for the investigation of cellular phosphorylation. ACS Appl. Mater. Inter. 6, 22423–22429 (2014).
Deiss, F. et al. Platform for high-throughput testing of the effect of soluble compounds on 3D cell cultures. Anal. Chem. 85, 8085–8094 (2013).
Simon, K.A. et al. Polymer-based mesh as supports for multi-layered 3D cell culture and assays. Biomaterials 35, 259–268 (2014).
Peppas, N.A., Hilt, J.Z., Khademhosseini, A. & Langer, R. Hydrogels in biology and medicine: From molecular principles to bionanotechnology. Adv. Mater. 18, 1345–1360 (2006).
Tibbitt, M.W. & Anseth, K.S. Hydrogels as extracellular matrix mimics for 3D cell culture. Biotechnol. Bioeng. 105, 655–663 (2009).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tao, F.F., Xiao, X., Lei, K.F. et al. Paper-based cell culture microfluidic system. BioChip J 9, 97–104 (2015). https://doi.org/10.1007/s13206-015-9202-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13206-015-9202-7