Abstract
The present investigation highlights the process parameters influencing the submerged fermentation of chitinase by Bacillus pumilus JUBCH08, purification and characterization of the enzyme and determination of antagonistic activity of the bacterium against Fusarium oxysporum. Medium supplemented with 0.5 % chitin and peptone, at initial pH 8.0, when incubated at 35 °C for 72 h favored highest chitinase production. The enzyme was purified 25.1-fold to homogeneity. The chitinase was found to be thermostable and alkali-tolerant with maximum activity at pH 8.0 and 70 °C for 1 h. The molecular weight of chitinase was found to be 64 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Mg2+, Co2+, Ca2+ and Mn2+ improved the chitinase activity. The K m and V max values of the enzyme were 0.13 mg/ml and 38.23 U/ml, respectively. When subjected to dual plate assay, the bacterium showed 45 % antagonism against F. oxysporum. Thus, it could be inferred that cultural conditions strongly affected the chitinase production by B. pumilus JUBCH08. The enzyme being thermostable and best functional under alkaline conditions could be useful for the feed industry and related biotechnological applications. Inhibition of F. oxysporum by the culture through lytic mechanism indicates its potentiality as a biocontrol agent.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Chitin, an insoluble polysaccharide, is one of the most abundant biopolymers on earth and is composed of linear chains of β-1, 4-N–acetyl glucosamine residues that are highly cross-linked by hydrogen bonds. Chitin as a structural polysaccharide is present in the fungal cell wall, nematodes, exoskeleton of insects and outer shell of crustaceans. Chitin forms a significant proportion of dry weight of the waste generated from shellfish industry (Wang and Chang 1997). Annually, shellfish production and processing industry contribute to the accumulation of a substantial amount of chitin rich waste that may prove to be an environmental hazard (Wang et al. 2002).
From the environmental point of view, chitin utilization is extremely essential for proper carbon–nitrogen balance. The utilization of chitinous wastes often involves corrosive chemicals resulting in high cost, low product yields and environmental toxicity. Chitinases (EC 3.2.1.14) are widespread in several bacteria, actinomycetes, fungi and higher plants (Swiontek Brzezinska et al. 2014).
Bacteria synthesize chitinase to breakdown chitin and metabolize it as carbon and energy sources (Lien et al. 2007). Numerous species of Bacillus had been reported to synthesize chitinase and act as biocontrol agents since they display antagonism against a wide range of plant pathogens that infect several economically important crops (Collins et al. 2003).
However, it should be noted that the use of chitinases is limited as the production and characteristics of chitinases often do not satisfy the industrial standards. Therefore, efforts must be directed toward finding newer sources of chitinases, better production strategies and ability of these chitinases to function under a wide range of temperature and pH. Studies on media optimization for chitinase production are a worthwhile approach because different media constituents may affect the production of microbial chitinases. Simultaneously, enzyme characterization is equally important to determine the optimal conditions under which the enzyme demonstrates its maximum activity. The present study aims at isolation and identification of a potent chitinolytic bacterium from marine sediment, optimized production, purification and characterization of chitinase and testing in vitro antagonistic activity of the bacterial isolate against phytopathogenic Fusarium oxysporum.
Materials and methods
Chemicals and reagents
All the analytical grade chemicals and media components used in the experiments were purchased from HiMedia, Mumbai, India.
Source of fungal culture
Fusarium oxysporum MTCC 7678 was obtained from Microbial Type Culture Collection and Gene Bank (MTCC), Chandigarh, India. The fungus was propagated on potato dextrose agar (PDA) plates and stored at 4 °C until further used.
Sampling
Bottom sediment for microbiological analysis was collected from the littoral zone (down to 5 cm) of Elliot’s Beach, Chennai Tamil Nadu, India (12.99°N 80.27°E). Following collection, sediment was aseptically transferred in a sterile zip-lock cover, stored in a container with ice and transported to the laboratory, where it was immediately processed (Donderski and Trzebiatowska 2000).
Isolation of chitinase producing bacteria
Chitinase producing bacteria were isolated from the marine sediment sample using serial dilution and spread plate technique on mineral salt medium with the following composition (g/l) along with 1 % (w/v) colloidal chitin: (NH4)2SO4, 0.28; NH4Cl, 0.23; KH2PO4, 0.0067; MgSO4·7H2O, 0.04; CaCl2·2H2O, 0.022; FeCl3·6H2O, 0.005; yeast extract, 0.2; NaCl, 0.015; NaHCO3, 1.0 and 1 ml/l of trace element solution containing (g/l) ZnSO4·7H2O, 0.01; MnCl2·4H2O, 0.1; CuSO4·5H2O, 0.392; CoCl2·6H2O, 0.248; NaB4O7·10H2O, 0.177 and NiCl2·H2O, 0.02 with glucose (1 % w/v). The plates were incubated at 30 ± 2 °C for 5 days and following incubation examined for the appearance of bacterial colonies. The colonies showing clear zones against a cream background were considered as chitinase producers and maintained on chitin agar slants.
Screening of chitinase producing bacteria
All the above isolates were individually inoculated in 100 ml of mineral salt broth supplemented with colloidal chitin (1 % w/v) and incubated at 30 ± 2 °C, 120 rpm for 5 days. Following incubation, the respective cultures were centrifuged at 10,000 rpm for 20 min at 4 °C. The cell-free supernatants were analyzed for enzyme activity (Kuddus and Ahmad 2013).
Chitinase assay
The individual reaction mixture consisted of 1 ml of individual culture supernatant, 1 ml of 1 % (w/v) colloidal chitin in citrate phosphate buffer (0.1 M, pH 5.5) and incubated at 50 °C for 30 min. Following incubation, all the reaction mixtures were put in boiling water bath for a period of 2–3 min to stop the enzyme action. The solutions were centrifuged at 5000 rpm for 10 min. The amount of reducing sugar in the supernatants was determined by dinitrosalicylic acid method (Miller 1959). One enzyme unit was defined as the amount of enzyme that liberated 1 μmol of N-acetyl-D-glucosamine per minute under the standard assay conditions. The isolate demonstrating highest chitinase activity was selected for further study. The soluble protein contents of the enzyme samples were determined by Lowry’s method (Lowry et al. 1951).
Molecular identification of selected bacterial isolate
The total genomic DNA was extracted from the bacterial cells using Bacterial Genomic DNA Isolation Kit (Chromous Biotech Pvt. Ltd., Bangalore, India) according to the manufacturer instructions and checked for its quality and concentration using 0.8 % (w/v) agarose gel electrophoresis.
16S rDNA region was amplified using universal forward 16S rDNA primer (5′-AGAGTTTGATCCTGGCTCAG-3′) and universal reverse 16S rDNA primer (5′-GGTTACCTTGTTACGACTT-3′). The PCR amplification was performed using the ABI 2720 thermal cycler (Applied Biosystems, USA) with 5 min initial denaturation at 94 °C, followed by 35 cycles that consisted of denaturation for 30 s at 94 °C, annealing for 30 s at 55 °C and extension at 72 °C for 1 min and a final extension of 5 min at 72 °C. Each reaction mixture contained 1 μl genomic DNA, 4 μl of dNTP’s (2.5 mM each); 10 μl of Taq DNA polymerase assay buffer and 1 μl Taq DNA polymerase (3 U/μl) (Chromous Biotech Pvt. Ltd., Bangalore, India) and the volume was made up to 100 μl using sterile distilled water. The PCR amplified product was eluted from the gel using Gel Extraction Spin-50 kit (Chromous Biotech Pvt. Ltd., Bangalore, India) according to the manufacturer instructions and detected by 1.2 % agarose gel (with ethidium bromide) electrophoresis.
The partial 16S rDNA sequencing of the PCR amplicon was performed at Chromous Biotech Pvt. Ltd., Bangalore, India using Big Dye Terminator Version 3.1 cycles sequencing kit and ABI 3500 XL Genetic Analyzer (Applied Biosystems, USA). The resultant nucleotide sequence was analyzed using the software Seq Scape version 5.2. The 16S rDNA sequence was aligned manually with the available nucleotide sequences retrieved from the NCBI database using BLASTn (Altschul et al. 1990). The nucleotide sequence was submitted to GenBank database (NCBI, USA) and was provided an accession number.
Optimization of chitinase production
To determine the optimum concentration of colloidal chitin for chitinase production, the isolate was grown in the presence of different concentrations (0.1–2 % w/v) of colloidal chitin. Effect of nitrogen sources (0.1 % w/v: peptone, tryptone, yeast extract, beef extract, ammonium sulfate, urea and sodium nitrate) on chitinase production was studied. Physical parameters such as initial pH (4, 5, 6, 7, 8 and 9), incubation temperature (20, 25, 30, 35, 40, 45 and 50 °C) and incubation time (24, 48, 72, 96, 120, 144 and 168 h) were optimized for maximum chitinase production by the selected isolate.
Enzyme purification
The cell-free supernatant of the chitinolytic isolate JUBCH08 was subjected to ammonium sulfate (70 % w/v) precipitation at 4 °C. The resulting precipitate obtained by centrifugation at 5000 rpm for 30 min at 4 °C was dissolved in phosphate buffer (0.2 M, pH 7.0), and dialyzed against the same buffer for 24 h. The dialyzed fraction was subjected to gel filtration chromatography using Sephadex G-200 column (1.5 × 10 cm) equilibrated with the phosphate buffer. Fractions were eluted with the same buffer at a flow rate of 1 ml/min. The fractions showing highest chitinase activity were pooled, concentrated and further purified using DEAE-Sepharose column (1.5 × 10 cm) pre-equilibrated with 10 mM Tris–HCl buffer (pH 7.6). The purified chitinase was eluted by a linear gradient of NaCl (0 to 0.5 M) in the same buffer. The flow rate was maintained at 0.5 ml/min. The active fractions having chitinase activity were collected, concentrated and used for characterization (Zhu et al. 2007). The molecular weight of purified chitinase was determined by SDS-PAGE (Laemmli 1970).
Characterization of chitinase
The effect of pH on chitinase activity was evaluated using 0.1 M sodium acetate buffer (pH 3.0–6.0), 0.1 M Tris–HCl buffer (pH 7.0–9.0), and 0.1 M glycine-NaOH buffer (pH 10.0). pH stability of the enzyme was measured by incubating the enzyme at room temperature for 0–3 h in the buffer supporting the highest enzyme activity. The effect of temperature on chitinase activity was determined by exposing the reaction mixture at 10–100 °C at the optimum pH. Thermostability of the chitinase was assessed by incubating the enzyme for 0–3 h at the temperature supporting the highest activity. In both instances aliquots of the enzyme were collected at intervals of 30 min, cooled and the residual enzyme activity was determined as per standard assay procedure. Effect of various metal ions (chloridized Ca2+, Co2+, Mg2+, Hg2+, Ag+, Fe3+ and sulfated Cu2+, Ni2+, Zn2+, Mn2+) was determined by preincubation of the enzyme with 1 mM concentration of each metal salt at the optimum pH and temperature for 30 min. The Michaelis constant (K m ) and the maximum velocity (V max) of the enzyme were determined from the double reciprocal plot by varying the colloidal chitin concentration from 0.2 to 2.0 mg/ml (Lineweaver and Burk 1934).
Antagonistic activity against phytopathogenic F. oxysporum MTCC 7678
The fungal growth inhibition capacity of the selected bacterial isolate was determined by dual plate assay (Huang et al. 2005). Pure culture of F. oxysporum MTCC 7678 (5 mm agar plug) was placed at two opposite corners of PDA plate. The bacterial culture was inoculated at the center. Plates were incubated at 28 ± 2 °C for 5 days. Following incubation, growth diameter of the fungal pathogen was measured. In the control plate, the bacterial culture was replaced by sterile distilled water. Result was expressed as mean of the percentages of inhibition of F. oxysporum MTCC 7678 growth in the presence of the bacterial isolate.
Percentage inhibition was calculated using the following formula
Mycelial morphology from the control and test plates was observed after staining with lactophenol cotton blue under binocular light microscope (Labomed, India).
Statistical analysis
All the optimization studies were conducted in triplicate and the data were analyzed using single factor analysis of variance (ANOVA). All the data are graphically presented as mean ± SD of triplicates (n = 3). ANOVA was performed using Microsoft Excel 2007. P values < 0.05 were considered significant with a confidence limit of 95 %.
Results and discussion
Isolation and screening of chitinase producing bacteria
Twenty-one chitinolytic bacterial isolates were isolated from the marine sediment sample plated on mineral salt medium supplemented with 1.0 % w/v colloidal chitin. Among these, nine isolates showed chitinolytic zones corresponding to 15–20 mm. When these nine chitinolytic isolates were introduced in liquid medium, chitinase activity ranging between 6.8 and 13.1 U/ml was recorded. Isolate JUBCH08 which showed the highest enzyme production was selected for further studies.
Molecular identification of the selected isolate
16S rDNA sequencing is a powerful tool for rapid identification and phylogenetic analysis of bacterial species. The apparent size of the PCR amplicon was ~1.5 kbp. The obtained 620 bp 16S rDNA nucleotide sequence was compared with available 16S ribosomal sequences in the NCBI database using BLASTn. The JUBCH08 isolate has been enrolled into a cluster containing Bacillus sp. and was found to be closely related to Bacillus pumilus strain XJ-117 with 99 % sequence similarity. Hence, it was designated as Bacillus pumilus JUBCH08. This nucleotide sequence submitted to GenBank was provided an accession number KC588945.
Effect of colloidal chitin concentration
Since chitinase is an inducible enzyme, maximum chitinase is produced when the production medium contains optimum concentration of colloidal chitin as the substrate. Different colloidal chitin concentrations (0.1–2 % w/v) were investigated for chitinase production by B. pumilus JUBCH08, where the bacterial culture produced maximum chitinase (16.2 U/ml) when supplemented with 0.5 % (w/v) of colloidal chitin. Beyond this substrate concentration the enzyme activity decreased to reach a level of 8.3 U/ml with 2 % w/v of chitin in the medium.
A decline in chitinase production beyond 0.5 % (w/v) colloidal chitin concentration may indicate reduced utilization of colloidal chitin as substrate, or accumulation of intermediate metabolites produced from chitin decomposition, which might have inhibited the enzyme synthesis. According to the Michaelis–Menten equation, it may be hypothesized that the rate of an enzymatic reaction is directly proportional to the substrate concentration at a lower percentage. The greater the substrate concentration, the lesser would be its influence on microbial growth and rate of enzymatic reaction (Allison et al. 2014).
While solid-state cultivation of B. thuringiensis R 176 with shrimp shells and rice straw as a substrate for chitinase production was studied, the optimal medium contained 0.5 % (w/v) ball-milled chitin (Chaiharn et al. 2013). Thus, the present findings emphasize that chitinase production could be correlated with colloidal chitin concentration in the medium.
Effect of nitrogen sources
Among the different organic and inorganic nitrogen sources added to the mineral salt broth, peptone was the most effective nitrogenous additive resulting in highest chitinase production (25.5 U/ml). Ammonium sulfate acted as the best inorganic nitrogen source (Fig. 1).
In general, chitinase production was improved by addition of organic nitrogen than inorganic nitrogen. This might be due to the fact that organic nitrogen sources contain most types of amino acids and growth factors vital for bacterial growth and could be metabolized directly by the cells, consequently promoting chitinase production. However, the present finding also indicates that ammonium sulfate acting as an inorganic nitrogen source may be used for large scale chitinase production as an alternative to peptone.
Wang et al. (2001) reported that peptone (0.1 % w/v) induced high levels of chitinase from B. cereus. Incorporation of different organic and inorganic nitrogen sources in the media resulted in maximum chitinase production by B. cereus JF68 in the presence of peptone (Jabeen and Qazi 2014).
Effect of initial pH of the medium
The pH of the immediate external environment partially governs the cytoplasmic pH and is believed to affect the rate of enzyme mediated reaction and structure of many biological molecules including proteins and nucleic acids. The present study reports appreciable chitinase production between pH 6.0 and 9.0, with the maximum (29.4 U/ml) recorded at pH 8.0. Decrease in enzyme yield was observed under acidic conditions (Fig. 2a).
The probable reason for maximum production of chitinase at pH 8.0 by B. pumilus JUBCH08 could be because most microbial extracellular enzymes are best produced at pH supporting maximum enzyme activity (Mc Tigue et al. 1994). The present observation is in corroboration with an earlier report where chitinase production by B. pabuli K1 was optimum at pH 8.0 (Frändberg and Schnürer 1994).
Effect of incubation temperature
In bioprocesses, specific temperature requirement and its regulation are the most critical parameters because cultivation temperature affects protein synthesis by influencing the rate of biochemical reactions within the microbial cell and thereby consequently inducing or repressing enzyme production (Nascimento and Martins 2004).
When B. pumilus JUBCH08 was grown at 20–50 °C, chitinase production was maximum (34.7 U/ml) at 35 °C. The enzyme production decreased above 40 °C (Fig. 2b). This result indicated the organism’s mesophilic preference for enzyme production. The present observation regarding the effect of incubation temperature on chitinase production is in complete agreement with a previous finding that reported 35 °C as the optimum temperature for chitinase production by B. amyloliquefaciens SM3 strain (Das et al. 2012).
Effect of incubation time
The chitinase yield was initially low and after a lag phase of approximately 48 h, the yield gradually increased. Maximum chitinase production (39.3 U/ml) was recorded at 72 h of incubation, beyond which the chitinase production reduced rapidly.
From the present observation, it may be anticipated that the initial linear nature of chitinase production by B. pumilus JUBCH08 was probably due to the fact that chitin being a hard-decomposable compound, longer time was needed by the bacterial culture to adapt to this substrate to produce chitinase. Till 72 h of incubation, N-acetyl glucosamine liberated by the chitinase activity was possibly used by B. pumilus JUBCH08 as a carbon and nitrogen source. Beyond 72 h, greater amount of accumulated N-acetyl glucosamine might have hampered further production of the enzyme by a feedback mechanism. The other possible reason for the decrease in chitinase yield might be due to activation of proteinase mediated degradation or inactivation of the chitinase by unclear mechanisms (Donderski and Trzebiatowska 2000).
Purification profile of chitinase
As summarized in Table 1, the chitinase from B. pumilus JUBCH08 was purified by the combination of several purification steps. The chitinase was purified to 25.1-fold in three steps with a recovery of 74.7 %. We relate the decrease in total chitinase activity to the loss of enzyme during the purification steps.
Effect of pH on chitinase activity and stability
The chitinase from B. pumilus JUBCH08 showed better enzyme activity at alkaline pH range as compared to the acidic pH range, wherein pH 8.0 supported maximum enzyme activity. At pH 8.0, the chitinase retained approximately 97 and 64 % of the original activity for 1 and 3 h, respectively (Fig. 3a).
The chitinase from B. pumilus JUBCH08 was different from many other bacterial chitinases in having its pH optima at pH 8.0. Characterization of a novel chitinase from B. brevis revealed that the enzymatic activity was stable at pH 6–10 and the enzyme was most active at pH 8.0 (Li et al. 2002). The purified chitinase from B. licheniformis SK-1 revealed activity optima at pH 6 and 8, respectively, when colloidal chitin was used as substrate (Kudan and Pichyangkura 2009).
Effect of temperature on chitinase activity and stability
In the present study, the chitinase was stable over a wide range of temperature (50–80 °C) with the maximum activity recorded at 70 °C. The enzyme retained approximately 94 and 37 % of its original activity for 1 h and 3 h, respectively, at 70 °C (Fig. 3b). Similar to the present study, the optimal temperature and pH of the chitinase produced by B. licheniformis MB-2 were 70 °C and 6.0, respectively (Toharisman et al. 2005).
Effect of metal ions on chitinase activity
The chitinase activity of B. pumilus JUBCH08 increased in the presence of Mg2+, Co2+, Ca2+ and Mn2+ ions. Zn2+, Ni2+ and Cu2+ ions slightly inhibited the chitinase activity, whereas Fe3+, Ag+ and Hg2+ proved to be inhibitory (Fig. 4). The result from the present study indicated that metal ions influenced the chitinase activity. This is in agreement with earlier studies wherein the chitinases from Bacillus MH-1 and Bacillus sp. DAU101 were activated by Mn2+ and Co2+, respectively (Sakai et al. 1998; Lee et al. 2007).
Michaelis and rate constant determination
The K m and V max values of the enzyme were 0.13 mg/ml and 38.23 U/ml, respectively. These results are significant as the small K m value indicates a high affinity of the enzyme toward the substrate (Plalmer 1987).
Determination of molecular weight
The purified chitinase was a monomer with an apparent molecular weight of 64 kDa. In corroboration to the present finding, chitinase from B. licheniformis Mb-2 was found to have a molecular weight of 67 kDa (Toharisman et al. 2005). The molecular mass of the exochitinase from B. thuringiensis subsp. pakistani was 66 kDa (Thamthianku et al. 2001).
Antagonistic activity against phytopathogenic fungus
Antagonistic activity of several Bacillus species against a number of pathogenic fungi is well documented. By the dual plate method, 45 % inhibition of F. oxysporum MTCC 7678 hyphae was observed when cultured in the presence of B. pumilus JUBCH08. However, in the control plate, no inhibition of the fungal hyphae was recorded. This antagonistic mechanism is majorly attributed to the action of bacterial chitinase on the fungal cell wall which contains chitin as a major structural component. Microscopic observation of F. oxysporum MTCC 7678 mycelia near the zone of inhibition revealed marked morphological changes in hyphae (hyphae appearing swollen, vacuolated, fragmented and distorted) compared to mycelia observed (intact without any distortion) in the control plate (Fig. 5). These morphological changes in the fungal hyphae when cultured in the presence of B. pumilus JUBCH08 are evidences of the bacterial chitinase activity on the fungal cell wall (Taechowisan et al. 2003).
Wilt is a widespread plant disease caused by many forms of soil-inhabiting Fusarium, especially F. oxysporum. Several investigations were undertaken to venture into the biological control of F. oxysporum by chitinolytic bacteria. The result of the dual plate assay presented here supports the mechanism of antagonism of B. pumilus JUBCH08 against F. oxysporum MTCC 7678 mediated through chitinase production. Several studies have demonstrated that bacterial chitinases can cause deformation and inhibition of viable fungal hyphae (Ashwini and Srividya 2014).
Conclusions
The present investigation revealed that B. pumilus JUBCH08 is a potent chitinase producer. Medium supplemented with chitin and peptone, at initial pH 8.0, when incubated at 35 °C for 72 h favored highest chitinase production. The chitinase was unique in some properties, being functional under alkaline conditions and displaying thermostability at 70 °C for 1 h. The results of the dual plate assay emphasized that the chitinolytic bacterium greatly inhibited the fungal pathogen through lytic mechanism, a characteristic that may be utilized for the formulation of a biocontrol agent as an alternative to harmful chemical pesticides.
References
Allison SD, Chacon SS, German DP (2014) Substrate concentration constraints on microbial decomposition. Soil Biol Biochem 79:43–49
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ (1990) Basic local alignment search tool. J Mol Biol 215:403–410
Ashwini N, Srividya S (2014) Potentiality of Bacillus subtilis as biocontrol agent for management of anthracnose disease of chilli caused by Colletotrichum gloeosporioides OGC1. 3. Biotech 4:127–136
Chaiharn M, Lumyong S, Hasan N, Plikomol A (2013) Solid-state cultivation of Bacillus thuringiensis R 176 with shrimp shells and rice straw as a substrate for chitinase production. Ann Microbiol 63:443–450
Collins DP, Jacobsen BJ, Maxwell B (2003) Spatial and temperal population dynamics of a phyllosphere colonizing Bacillus subtilis biological control agent of sugar beet cercospora leaf spot. Biol Control 26:224–232
Das MP, Rebecca JL, Sharmila S, Banerjee A, Kumar D (2012) Identification and optimization of cultural conditions for chitinase production by Bacillus amyloliquefaciens SM3. J Chem Pharm Res 4:4816–4821
Donderski W, Trzebiatowska M (2000) Influence of physical and chemical factors on the activity of chitinases produced by planktonic bacteria isolated from Jeziorak Lake. Pol J Environ Stud 9:77–82
Frändberg E, Schnürer J (1994) Chitinolytic properties of Bacillus pabuli K1. J Appl Bacteriol 76:361–367
Huang CJ, Wang TK, Chung SC, Chen CY (2005) Identification of an antifungal chitinase from a potential biocontrol agent, Bacillus cereus. J Biochem Mol Biol Sci 38:82–88
Jabeen F, Qazi JI (2014) Isolation of chitinase yielding Bacillus cereus JF68 from soil employing an edible crab shell chitin. J Sci Ind Res 73:771–776
Kudan S, Pichyangkura R (2009) Purification and characterization of thermostable chitinase from Bacillus licheniformis SK-1. Appl Biochem Biotechnol 157:23–35
Kuddus SM, Ahmad RIZ (2013) Isolation of novel chitinolytic bacteria and production optimization of extracellular chitinase. J Genet Eng Biotechnol 11:39–46
Laemmli UK (1970) Cleavage of structural proteins during the assembly of the head of bacteriophage T4. Nature 227:680–685
Lee YS, Park IH, Yoo JS, Chung SY, Lee YC, Cho YS, Ahn SC, Kim CM, Choi YL (2007) Cloning, purification, and characterization of chitinase from Bacillus sp. DAU101. Bioresour Technol 98:2734–2741
Li S, Zhao ZA, Li M, Gu ZR, Bai C, Huang WD (2002) Purification and characterization of a novel chitinase from Bacillus brevis. Sheng Wu Hua Xue Yu Sheng Wu Wu Li Xue Bao (Shanghai) 34:690–696
Lien TS, Yu ST, Wu ST, Too JR (2007) Induction and purification of a thermophilic chitinase produced by Aeromonas sp. DYU-too7 using glucosamine. Biotechnol Bioproc Eng 12:610–617
Lineweaver H, Burk D (1934) The determination of enzyme dissociation constants. J Am Chem Soc 56:658–666
Lowry OH, Rosebrough NJ, Farr AL, Randall RJ (1951) Protein estimation with the folin phenol reagent. J Biol Chem 193:265–275
Mc Tigue MA, Kelly CT, Fogarty WM, Doyle EM (1994) Production studies on the alkaline amylase of three alkalophilic Bacillus spp. Biotechnol Lett 16:569–574
Miller GL (1959) Use of dinitrosalicylic acid reagent for determination of reducing sugar. Anal Chem 31:426–428
Nascimento WCA, Martins MLL (2004) Production and properties of an extracellular protease from thermophilic Bacillus sp. Braz J Microbiol 35:91–96
Sakai K, Yokota A, Kurokawa H, Wakayama M, Moriguchi M (1998) Purification and characterization of three thermostable endochitinases of a noble Bacillus strain, MH-1, isolated from chitin-containing compost. Appl Environ Microbiol 64:3397–3402
Swiontek Brzezinska M, Jankiewicz U, Burkowska A, Walczak M (2014) Chitinolytic microorganisms and their possible application in environmental protection. Curr Microbiol 68:71–81
Taechowisan T, Peberdy JF, Lumyong S (2003) Chitinase production by endophytic Streptomyces aureofaciens CMUAc130 and its antagonism against phytopathogenic fungi. Ann Microbiol 53:447–461
Toharisman A, Suhartono MT, Spindler-Barth M, Hwang J, Pyun Y (2005) Purification and characterization of a thermostable chitinase from Bacillus licheniformis Mb-2. World J Microb Biot 21:733–738
Wang SL, Chang WT (1997) Purification and characterization of two bifunctional chitinases/lysozymes extracellularly produced by Pseudomonas aeruginosa K-187 in shrimp and crab shell powder medium. Appl Environ Microbiol 63:380–386
Wang SY, Moyne AL, Thottappilly G, Wu SJ, Locy RD, Singh NK (2001) Purification and characterization of a Bacillus cereus exochitinase. Enzyme Microb Technol 28:492–498
Wang SL, Hsiao WJ, Chang WT (2002) Purification and characterization of an antimicrobial chitinase extracellularly produced by Monascus purpureus CCRC31499 in a shrimp and crab shell powder medium. J Agric Food Chem 50:2249–2255
Zhu X, Zhou Y, Feng J (2007) Analysis of both chitinase and chitosanase produced by Sphingomonas sp. CJ-5. J Zhejiang Univ Sci B 8:831–838
Acknowledgments
We extend our sincere gratitude to the management of Jain University for providing the research facilities.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Bhattacharya, S., Das, A., Samadder, S. et al. Biosynthesis and characterization of a thermostable, alkali-tolerant chitinase from Bacillus pumilus JUBCH08 displaying antagonism against phytopathogenic Fusarium oxysporum . 3 Biotech 6, 87 (2016). https://doi.org/10.1007/s13205-016-0406-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13205-016-0406-x