Abstract
In this study, a Mg-X wt.%SiO2 (X = 1, 2) nanocomposite was developed using amorphous silica nanoparticles via the accumulative extrusion method. The reinforcement phase was added to the matrix between extrusion passes. The study evaluated the mechanical properties of the composite samples via compression and hardness tests, while the microstructure and texture were analyzed using optical microscopy, field emission scanning electron microscopy (FESEM) and X-ray diffractometry. To remove the deformation history and examine the effect of the reinforcement phase on mechanical properties, the samples were annealed in an argon atmosphere. In addition, monolithic magnesium samples were fabricated through the same process to serve as a basis for comparison. This study revealed that adding 1 wt% amorphous silica nanoparticles to the magnesium matrix improved the overall mechanical properties. However, the nanocomposites displayed varying properties in different directions. Along the extrusion direction, the yield strength and ductility increased up to 57% and 5%, respectively, while the ultimate compressive strength decreased by about 8%. Along the normal direction, the yield strength and ductility increased up to 37% and 45%, respectively, while the ultimate compressive strength decreased by about 9%. The Mg/2wt.%SiO2 nanocomposite sample showed superior Brinell hardness. The number of extrusion passes had a significant impact on the distribution of nanoparticles within the matrix. The optical microscope micrographs revealed that the reinforcement phase was uniformly distributed throughout the matrix, and no agglomeration of nanoparticles was observed. The X-ray diffraction results demonstrated that the texture of nanocomposite samples weakened after adding nanoparticles, resulting in improved ductility.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Data Availability
No datasets were generated or analysed during the current study.
References
Bomberg MS, Kockelman KM, Thompson MR (2008) Greenhouse gas emission control options: assessing transportation & electricity generation technologies & policies to stabilize climate change
Zachariah Z, Tatiparti SSV, Mishra S, Ramakrishnan N, Ramamurty U (2013) Tension–compression asymmetry in an extruded mg alloy AM30: temperature and strain rate effects. Mater Sci Eng: A 572:8–18
Luo AA (2002) Magnesium: current and potential automotive applications. Jom 54:42–48
Song J, She J, Chen D, Pan F (2020) Latest research advances on magnesium and magnesium alloys worldwide. J Magnes Alloys 8:1–41
Garcés G, Rodríguez M, Perez P, Adeva P (2006) Effect of volume fraction and particle size on the microstructure and plastic deformation of Mg–Y2O3 composites. Mater Sci Eng: A 419:357–364
Kongshaug DR, Ferguson J, Schultz BF, Rohatgi PK (2014) Reactive stir mixing of Al–Mg/Al 2 O 3np metal matrix nanocomposites: effects of mg and reinforcement concentration and method of reinforcement incorporation. J Mater Sci 49:2106–2116
Wu H, Shan Z, Fan J, Zhang Q, Deng K, Wu Y et al (2021) Microstructure and mechanical properties of SiCp/AZ91 composite processed with extrusion and EPT. Mater Sci Technol 37:269–279
Hassan S, Gupta M (2005) Enhancing physical and mechanical properties of mg using nanosized Al 2 O 3 particulates as reinforcement. Metall Mater Trans A 36:2253–2258
Jayalakshmi S, Sahu S, Sankaranarayanan S, Gupta S, Gupta M (2014) Development of novel Mg–Ni60Nb40 amorphous particle reinforced composites with enhanced hardness and compressive response. Mater Design 53:849–855
Nie K, Wang X, Xu L, Wu K, Hu X, Zheng M (2012) Effect of hot extrusion on microstructures and mechanical properties of SiC nanoparticles reinforced magnesium matrix composite. J Alloys Compd 512:355–360
Lv Z, Ren X, Wang W, Gao X, Li W (2016) Microstructure and mechanical properties of Mg/2 wt.% SiC p nanocomposite fabricated by ARB process. J Nanomater 2016.
Sankaranarayanan S, Nayak UP, Sabat R, Suwas S, Almajid A, Gupta M (2014) Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response. J Alloys Compd 615:211–219
Issa HK, Maleki A, Taherizadeh A, Zargaran A (2022) On the structure-properties relationship of amorphous and crystalline silica nanoparticles reinforced magnesium matrix nanocomposites. J Alloys Compd 924:166605
Karimi A, Maleki A, Taherizadeh A, Niroumand B (2023) Synthesis and characterization of Sn–Cu/SiO2 (np) lead-free nanocomposite solder through angular accumulative extrusion. J Mater Sci: Mater Electron 34:1–16
Borouni M, Niroumand B, Maleki A (2018) A study on crystallization of amorphous nano silica particles by mechanical activation at the presence of pure aluminum. J Solid State Chem 263:208–215
Borouni M, Niroumand B, Maleki A (2017) Synthesis and characterization of an in-situ Magnesium-based cast nano composite via nano-SiO2 additions to the melt. Materiali in Tehnologije 51(6):945–951
Fathian Z, Maleki A, Niroumand B (2017) Synthesis and characterization of ceramic nanoparticles reinforced lead-free solder. Ceram Int 43:5302–5310
Issa HK, Taherizadeh A, Maleki A, Ghaei A (2017) Development of an aluminum/amorphous nano-SiO2 composite using powder metallurgy and hot extrusion processes. Ceram Int 43:14582–14592
Wang Y, Tayyebi M, Assari A (2022) Fracture toughness, wear, and microstructure properties of aluminum/titanium/steel multi-laminated composites produced by cross-accumulative roll-bonding process. Arch Civ Mech Eng 22:49
Senemar M, Maleki A, Niroumand B, Allafchian A (2016) A novel and facile method for silica nanoparticles synthesis from high temperature vulcanization (HTV) silicon. Metall Mater Eng 22:1–8
Meenashisundaram GK, Seetharaman S, Gupta M (2014) Enhancing overall tensile and compressive response of pure mg using nano-TiB2 particulates. Mater Charact 94:178–188
Tsai M, Chang C (2013) Grain size effect on deformation twinning in Mg–Al–Zn alloy. Mater Sci Technol 29:759–763
Beyerlein I, Capolungo L, Marshall P, McCabe R, Tomé C (2010) Statistical analyses of deformation twinning in magnesium. Phil Mag 90:2161–2190
Ashby MF, Lewis J (1968) On the interaction of inclusions with migrating grain boundaries. Surfaces and Interfaces II: Physical and Mechanical Properties, pp 395–415
Biswas S, Suwas S, Sikand R, Gupta AK (2011) Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion. Mater Sci Engineering: A 528:3722–3729
Tekumalla S, Bibhanshu N, Shabadi R, Suwas S, Ha TMH, Gupta M (2018) Evolution of texture and asymmetry and its impact on the fatigue behaviour of an in-situ magnesium nanocomposite. Mater Sci Eng: A 727:61–69
Tromans D (2011) Elastic anisotropy of HCP metal crystals and polycrystals. Int J Res Rev Appl Sci 6:462–483
Alharbi HF, Luqman M, El-Danaf E, Alharthi NH (2018) Experimental and numerical study of texture evolution and anisotropic plastic deformation of pure magnesium under various strain paths. Adv Mater Sci Eng 2018:1–12
Nave MD, Barnett MR (2004) Microstructures and textures of pure magnesium deformed in plane-strain compression. Scripta Mater 51:881–885
Zhou G, Jain MK, Wu P, Shao Y, Li D, Peng Y (2016) Experiment and crystal plasticity analysis on plastic deformation of AZ31B mg alloy sheet under intermediate temperatures: how deformation mechanisms evolve. Int J Plast 79:19–47
Gan Y, Song W, Ning J (2016) Crystal plasticity analysis of plane strain deformation behavior and texture evolution for pure magnesium. Comput Mater Sci 123:232–243
Chao PG (2018) The formability of Magnesium and Magnesium-Rare Earth alloys under the strain path of cold rolling. Master’s thesis, The University of Manchester, United Kingdom
Al-Samman T, Gottstein G (2008) Room temperature formability of a magnesium AZ31 alloy: examining the role of texture on the deformation mechanisms. Mater Sci Eng: A 488:406–414
Mackenzie L, Davis B, Humphreys F, Lorimer G (2007) The deformation, recrystallisation and texture of three magnesium alloy extrusions. Mater Sci Technol 23:1173–1180
Hazeli K, Cuadra J, Vanniamparambil P, Kontsos A (2013) In situ identification of twin-related bands near yielding in a magnesium alloy. Scr Mater 68:83–86
Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena, 2nd edn. Elsevier Science Ltd., Pergamon
Hirsch J, Al-Samman T (2013) Superior light metals by texture engineering: optimized aluminum and magnesium alloys for automotive applications. Acta Materialia 61(3):818–843
Stanford N, Atwell D, Beer A, Davies C, Barnett M (2008) Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys. Scr Mater 59:772–775
Ramezanalizadeh H, Emamy M, Shokouhimehr M (2015) A novel aluminum based nanocomposite with high strength and good ductility. J Alloys Compd 649:461–473
Acknowledgements
Not Applicable.
Funding
The authors declare that no funds, grants, or other support were received during the preparation of this manuscript.
Author information
Authors and Affiliations
Contributions
Mohammad Moradi performed the experiment. Hasan Issa assisted in the analysis of the results. All co-authors participated in the discussion of the results. The project was carried out under the supervision of Abbas Ghaei, Ali Maleki and Aboozar Taherizadeh. Mohammad Moradi wrote the manuscript with the support of all other co-authors.
Corresponding author
Ethics declarations
Competing Interests
The authors declare no competing interests.
Ethical Approval
Not Applicable.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Moradi, M., Ghaei, A., Maleki, A. et al. Development of a Magnesium/Amorphous Nano-SiO2 Composite using Accumulative Extrusion Method. Silicon 16, 4883–4894 (2024). https://doi.org/10.1007/s12633-024-03037-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-024-03037-1