Abstract
The quality of the multi-crystalline silicon ingot mainly depends on the defects and impurity distribution. The impurities originate from the various furnace parts and feedstock. The argon gas which acts as carrier gas plays an important role to reduce the chemical reaction inside the furnace. The reduction of carbon and oxygen concentration results in the reduction of SiO, CO and SiC formation. Various argon gas flow rates (5 LPM to 30 LPM) are simulated and C, O, CO and SiO concentrations were analysed. By increasing the argon gas flow rate, the SiO gas in the melt-free surface gets reduced from 6.9E2 to 5.1E1ppma. Also, it prevents CO gas formation in the melt-free surface. Oxygen concentration is lower than the concentration required for LID for 25 LPM and 30 LPM. From the 20 LPM, mc-Si ingot has Carbon concentration lower than the critical concentration required for SiC formation. The experimental result of 25 LPM Argon gas flow rate is compared with simulation results.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Data Availability
Not applicable.
References
Green M, Dunlop E, Hohl-Ebinger J, Yoshita M, Kopidakis N, Hao X (2021) Solar cell efficiency tables (version 57). Prog Photovolt Res Appl 29(1):3–15
Li Z, Liu L, Liu X, Zhang Y, Xiong J (2012). J Crts Growth 360:87–91
Wang S, Fang HS, Zhao CJ, Zhang Z, Zhang MJ, Int JFX (2015). J Heat Mass Transf 84:370–375
Machida N, Suzuki Y, Abe K, Ono N, Kida M, Shimizu Y (1998). J. Crst. Growth 186(3):362–368
Su W, Li J, Li C, Yang W, Wang J (2021). Silicon:1–7
Li Z, Liu L, Ma W, Kakimoto K (2011). J. Crst. Growth 318(1):298–303
Bellmann MP, Lindholm D (2014). J Crst Growth 399:33–38
Li X, Yang Y-C, Hsu C-M, Tseng H-W, Zhang J, Yang C-F (2021). Sensors and Materials 33(8):2607–2618
Nakano S, Liu LJ, Chen XJ, Matsuo H, Kakimoto K, Crst J (2009). Growth 311(4):1051–1055
Kumar M, Avinash MS, Ramasamy P (2020). Silicon:1–10
Ida Z, Chen J-C, Nguyen THT (2018) In MATEC Web of Conferences, vol. 204, p. 05013. EDP Sciences,
Gao B, Nakano S, Kakimoto K (2011). J Crst Growth 318(1):255–258
Qi X, Liu L, Ma W (2017). J. Crst. Growth 468:933–938
Saitoh T, Wang X, Hashigami H, Abe T, Igarashi T, Glunz S, Rein S et al (2001). Sol Energy Mater Sol Cells 65(1–4):277–285
Kesavan V, Srinivasan M, Ramasamy P (2019) The influence of multiple-heaters on the reduction of impurities in mc-Si for directional solidification. silicon 11(3):1335–1344
Gao B, Nakano S, Kakimoto K (2013) Reduction of oxygen impurity in multicrystalline silicon production. Int J Photoener 2013
Sanmugavel S, et al. (2017) "Effect of heater design on the melt crystal interface." AIP Conf Proceed. Vol. 1832. No. 1. AIP Publishing LLC,
Vorob’ev AN, Sid’ko AP, Kalaev VV (2014). J. Crst. Growth 386:226–234
Lan CW, Hsu C, Nakajima K (2015) In handbook of crystal growth. Elsevier, pp 373–411
Giannattasio A, Senkader S, Azam S, Falster RJ, Wilshaw PR (2003). Microelectron Eng 70(1):125–130
Matsuo, H., Ganesh, R. B., Nakano, S., Liu, L., Kangawa, Y., Arafune, K., ... & Kakimoto, K. J. Crst. Growth, (2008), 310(22), 4666–4671
Kerkar F, Kheloufi A, Dokhan N, Ouadjaout D, Belhousse S, Medjahed S, Laib K (2020). Silicon 12(3):473–478
Lindroos J, Savin H (2016). Sol Energy Mater Sol 147:115–126
Hull R Ed. (1999) Properties of crystalline silicon (no. 20. IET)
Xi Z, Tang J, Deng H, Yang D, Que D (2007). Sol Energy Mater Sol 91(18):1688–1691
Smirnov AD, Kalaev VV (2008). J Crst Growth 310(12):2970–2976
Liu X, Yan G, Hong R (2015). J Mater Sci Technol 31(11):1094–1100
Kolbesen BO, Mühlbauer A (1982) Solid state. Electron Lett 25(8):759–775
Akiyama N, Yatsurugi Y, Endo Y, Imayoshi Z, Nozaki T (1973). Appl Phys Lett 22(12):630–631
Sivaraj D, Kesavan V, Keerthivasan T, Kumar MA, Srinivasan M, Ramasamy P (2022) Investigation of orientation, surface morphology, impurity concentration and reflectivity of the multi-crystalline silicon wafers. Mat Chem Phys 125932
Acknowledgements
This work is supported by the Department of Science and Technology, Government of India (Order No. DST/TMD/CERI/RES/2020/7 dated 31/12/2020).
Funding
This work is supported by the Department of Science and Technology, Government of India (Order No. DST/TMD/CERI/RES/2020/7 dated 31/12/2020).
Author information
Authors and Affiliations
Contributions
S. Sugunraj Conceptualization, Methodology, Formal analysis, Investigation, Data Curation, Resources, Writing - Original Draft, Writing - Review & Editing
G. Aravindan Methodology, Formal analysis, Investigation
M. Srinivasan Supervision, Visualization
P. Ramasamy Supervision
Corresponding author
Ethics declarations
Compliance with Ethical Standards
Not Applicable.
Consent to Participate
Not Applicable.
Consent for Publication
Not Applicable.
Conflicts of Interest/Competing Interests
The authors have no conflicts of interest to declare that are relevant to the content of this article.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Sugunraj, S., Aravindan, G., Srinivasan, M. et al. Influence of Argon Gas Flow Rate on Oxygen and Carbon Impurities Concentration in Multicrystalline Silicon Grown by Directional Solidification Furnace: Numerical and Experimental Investigation. Silicon 15, 1701–1724 (2023). https://doi.org/10.1007/s12633-022-02097-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-022-02097-5