Abstract
Fly ash (FA) based geopolymers are affected by the reactive nature of FA, concentration and quantity of alkali activators and the curing conditions. However, for the geopolymer production, researchers are still focusing on the concentration and quantity of alkali activators and the curing conditions. In the present study, FAs from two distinct thermal power plants and their activated geopolymer paste were investigated under physical, chemical, spectroscopic, mineralogical and microstructural characterizations. Based on the characterizations, the suitability of FAs for the geopolymer production was determined and validated by the compressive strength of geopolymer concrete. Additionally, the effect of critical parameters such as sodium hydroxide (NaOH) molarity, alkaline to FA ratio, curing time and curing temperature were studied. From the results, it is inferred that the FA’s potential reactivity is to be identified through its characterization techniques before the synthesis of geopolymers. The quantity of vitreous silica (Si) and alumina (Al) contents in the FA significantly affects the geopolymerisation process. In order to choose the right source of FA, it is required to characterize the FA and its activated geopolymer paste. Thereby, the wide variation of the geopolymer synthesis parameters that leads to undesirable production cost and hazardous work environment can be avoided.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Data Availability
All the data are available in the form of figures and tables.
Code Availability
Not applicable.
References
Central Electricity Authority (2020) Report on fly ash generation at coal/lignite based Thermal Power Stations and its utilization in the country for the year 2018-19, Minister of Power, New Delhi, India January, 2020. https://cea.nic.in/reports/others/thermal/ tcd/flyash_201819.pdf. Accessed 04.11.2020
Palomo A, Grutzeck MW, Blanco MT (1999) Alkali-activated fly ashes: A cement for the future. Cem Concr Res 29:1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9
Fernandez-Jimenez A, Palomo A (2005) Mid-infrared spectroscopic studies of alkali-activated fly ash structure. Micropor Mesopor Mat 86:207–214. https://doi.org/10.1016/j.micromeso.2005.05.057
Chithambaram SJ, Kumar S, Prasad MM, Adak D (2018) Effect of parameters on the compressive strength of fly ash based geopolymer concrete. Struct Concr 19:1202–1209. https://doi.org/10.1002/suco.201700235
Joseph B, Mathew G (2012) Influence of aggregate content on the behavior of fly ash based geopolymer concrete. Sci Iran 19:1188–1194. https://doi.org/10.1016/j.scient.2012.07.006
Vora PR, Dave UV (2013) Parametric studies on compressive strength of geopolymer concrete. Procedia Eng 51:210–219. https://doi.org/10.1016/j.proeng.2013.01.030
Somna K, Jaturapitakkul C, Kajitvichyanukul P, Chindaprasirt P (2011) NaOH-activated ground fly ash geopolymer cured at ambient temperature. Fuel 90:2118–2124. https://doi.org/10.1016/j.fuel.2011.01.018
Ahmed MF, Nuruddin MF, Nasir Shafiq N (2011) Compressive strength and workability characteristics of low-calcium fly ash-based self compacting geopolymer concrete. Int J Arch Civ Constr Sci Environ Eng. https://doi.org/10.5281/zenodo.1330481
Nath P, Sarker PK (2015) Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature. Cem Concr Compos 55:205–214. https://doi.org/10.1016/j.cemconcomp.2014.08.008
Hardjito D, Rangan BV (2005) Development and properties of low calcium fly ash based geopolymer concrete. Curtin University of Technology, Perth. http://hdl.handle.net/20.500.11937/5594. Accessed 04.11.2020
Gunasekara C, Law DW, Setunge S (2016) Long term engineering properties of fly ash geopolymer concrete. SCMT4 LasVegas, USA. http://www.claisse.info/2016%20papers/S109.pdf. Accessed 04.11.2020
Hardjito D, Wallah SE, Sumajouw DMJ, Rangan BV (2004) On the development of fly ash-based geopolymer concrete. Mater J 101:467–472
Olivia M, Nikraz H (2012) Properties of fly ash geopolymer concrete designed by taguchi method. Mater Des 36:191–198. https://doi.org/10.1016/j.matdes.2011.10.036
Sumajouw DMJ, Hardjito D, Wallah SE, Rangan BV (2007) Fly ash-based geopolymer concrete: study of slender reinforced columns. J Mater Sci 42:3124–3130. https://doi.org/10.1007/s10853-006-0523-8
Krishnan T, Purushothaman R (2017) Effect of molarity of sodium hydroxide and curing temperature on the strength of geopolymer concrete containing recycled concrete aggregate. In: Proceeding of the International Conference on Advances in Construction Materials and Systems (ICACMS) 4:45–53
Junaid MT, Kayali O, Khennane A, Black J (2015) A mix design procedure for low calcium alkali activated fly ash-based concretes. Construct Build Mater 79:301–310
Bakharev T (2005) Geopolymeric materials prepared using class F fly ash and elevated temperature curing. Cem Concr Res 35:1224–1232. https://doi.org/10.1016/j.cemconres.2004.06.031
Criado M, Palomo A, Fernandez-Jimenez A (2005) Alkali activation of fly ashes. Part 1: Effect of curing conditions on the carbonation of the reaction products. Fuel 84:2048–2054. https://doi.org/10.1016/j.fuel.2005.03.030
Rickard WDA, Williams R, Temuujin J, Riessen AV (2011) Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications. Mater Sci Eng A 528:3390–3397. https://doi.org/10.1016/j.msea.2011.01.005
Temuujin J, Rickard W, Riessen AV (2013) Characterization of various fly ashes for preparation of geopolymers with advanced applications. Adv Powder Technol 24:495–498. https://doi.org/10.1016/j.apt.2013.01.013
Williams RP, Riessen AV (2010) Determination of the reactive component of fly ashes for geopolymer production using XRF and XRD. Fuel 89:3683–3692. https://doi.org/10.1016/j.fuel.2010.07.031
Valcke SLA, Pipilikaki P, Fischer HR, Verkuijlen MHW, Eck ERHV (2015) FT-IR and 29Si-NMR for evaluating aluminium–silicate precursors for geopolymers. Mater Struct 48:557–569. https://doi.org/10.1617/s11527-014-0432-2
Nikolic V, Komljenovic M, Bascarevic Z, Marjanovic N, Miladinovic Z, Petrovic R (2015) The influence of fly ash characteristics and reaction conditions on strength and structure of geopolymers. Constr Build Mater 94:361–370. https://doi.org/10.1016/j.conbuildmat.2015.07.014
Korniejenko K, Łach M, Marczyk J, Ziejewska C, Halyag NP, Mucsi G (2019) Fly ash as a raw material for geopolymerisation-mineralogical composition and morphology. IOP Conf Seri: Mater Sci Eng 706:012006. https://doi.org/10.1088/1757-899X/706/1/012006
Korniejenko K, Halyag NP, Mucsi G (2019) Fly ash as a raw material for geopolymerisation - chemical composition and physical properties. IOP Conf Seri: Mater Sci Eng 706:012002. https://doi.org/10.1088/1757-899X/706/1/012002
Hadi MNS, Al-Azzawi M, Yu T (2018) Effects of fly ash characteristics and alkaline activator components on compressive strength of fly ash-based geopolymer mortar. Constr Build Mater 175:41–54. https://doi.org/10.1016/j.conbuildmat.2018.04.092
Kumar S, Mucsi G, Kristály F, Pekker P (2017) Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers. Adv Powder Technol 28:805–813. https://doi.org/10.1016/j.apt.2016.11.027
Wang T, Ishida T, Gu R (2020) A study of the influence of crystal component on the reactivity of low-calcium fly ash in alkaline conditions based on SEM-EDS. Constr Build Mater 243:1–14. https://doi.org/10.1016/j.conbuildmat.2020.118227
Risdanareni P, Puspitasari P, Jaya EJ (2017) Chemical and physical characterization of fly ash as geopolymer material. MATEC Web Conf 97:01031. https://doi.org/10.1051/matecconf/20179701031
Diaz EI, Allouche EN, Eklund S (2010) Factors affecting the suitability of fly ash as source material for geopolymers. Fuel 89:992–996. https://doi.org/10.1016/j.fuel.2009.09.012
Assi LN, Carter K, Deaver E, Ziehl P (2020) Review of availability of source materials for geopolymer/sustainable concrete. J Clean Prod 263:1–13.https://doi.org/10.1016/j.jclepro.2020.121477
Fernandez-Jimenez A, Torre AGDL, Palomo A, López-Olmo G, Alonso MM, Aranda MAG (2006) Quantitative determination of phases in the alkali activation of fly ash. Part II: Degree of reaction. Fuel 85:1960–1969. https://doi.org/10.1016/j.fuel.2006.04.006
Criado M, Fernandez-Jimenez A, Torre AGDL, Aranda MAG, Palomo A (2007) An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash. Cem Concr Res 37:671–679. https://doi.org/10.1016/j.cemconres.2007.01.013
Komljenovi M, Bacarevic Z, Bradic V (2010) Mechanical and microstructural properties of alkali-activated fly ash geopolymers. J Hazard Mater 181:35–42. https://doi.org/10.1016/j.jhazmat.2010.04.064
ASTM C618-12a (2012) Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken. www.astm.org
Palomo A, Alonso S, Fernandez-Jimenez A, Sobrados I, Sanz J (2004) Alkaline activation of fly ashes: NMR study of the reaction products. J Am Ceram Soc 87:1141–1145. https://doi.org/10.1111/j.1551-2916.2004.01141.x
Palomo A, Fernndez-Jimenez A, Criado M (2004) Geopolymers: same basic chemistry, different microstructures. Mater Constr 54:77–91
Criado M, Fernandez Jimenez A, Sobrados I, Palomo A, Sanz J (2012) Effect of relative humidity on the reaction products of alkali activated fly ash. J Eur Ceram Soc 32:2799–2807. https://doi.org/10.1016/j.jeurceramsoc.2011.11.036
Guo X, Shi H, Dick WA (2010) Compressive strength and microstructural characteristics of class C fly ash geopolymer. Cem Concr Compos 32:142–147. https://doi.org/10.1016/j.cemconcomp.2009.11.003
Barbosa VFF, MacKenzie KJD, Thaumaturgo C (2000) Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers. Int J Inorg Mater 2:309–317. https://doi.org/10.1016/S1466-6049(00)00041-6
Engelhardt G, Lippmaa E, Magi M (1981) Ordering of silicon and aluminum ions in the framework of NaX zeolites - A solid-state high-resolution 29Si n.m.r. study. J Chem Soc Chem Commun 14:712–713
Davidovits J (2015) Geopolymer chemistry and applications, 4th edn. Geopolymer Institute, Saint- Quentin
Engelhardth G, Michel D (1987) High resolution solid state NMR of silicates and zeolites. Wiley, New York
Fernandez-Jimenez A, Palomo A, Sobrados I, Sanz J (2006) The role played by the reactive alumina content in the alkaline activation of fly ashes. Micropor Mesopor mater 91:111–119. https://doi.org/10.1016/j.micromeso.2005.11.015
Alvarez-Ayuso E, Querol X, Plana F et al (2008) Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes. J Hazard Mater 154:175–183. https://doi.org/10.1016/j.jhazmat.2007.10.008
Fernandez-Jimenez A, Palomo A (2005) Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cem Concr Res 35:1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003
Ryu GS, Lee YB, Koh KT, Chung YS (2013) The mechanical properties of fly ash-based geopolymer concrete with alkaline activators. Constr Build Mater 47(2013):409–418. https://doi.org/10.1016/j.conbuildmat.2013.05.069
Criado M, Fernandez-Jimenez A, Palomo A, Sobrados I, Sanz J (2008) Effect of the SiO2/Na2O ratio on the alkali activation of fly ash. Part II: 29Si MAS-NMR Survey. Micropor Mesopor Mat 109:525–534. https://doi.org/10.1016/j.micromeso.2007.05.062
Marjanovic N, Komljenovic M, Bascarevic Z, Nikolic V (2014) Improving reactivity of fly ash and properties of ensuing geopolymers through mechanical activation. Construct Build Mater 57:151–162. https://doi.org/10.1016/j.conbuildmat.2014.01.095
Hajimohammadi A, Provis JL, Van Deventer JSJ (2011) The effect of silica availability on the mechanism of geopolymerisation. Cem Concr Res 41:210–216. https://doi.org/10.1016/j.cemconres.2011.02.001
Acknowledgements
The authors whole-heartily wish to acknowledge the financial support provided by the University Grants Commission, India.
Funding
This work was funded by University Grants Commission (UGC), India through Major Research Project Scheme. (Grant no: F. No-43-259/2014(SR) and 28.07.2015)
Author information
Authors and Affiliations
Contributions
Thulasirajan Krishnan: Conceptualization, Methodology, Formal analysis and investigation, Writing - original draft preparation and Writing - editing.
Revathi Purushothaman: Supervision, Funding acquisition and Writing - review.
Corresponding author
Ethics declarations
This manuscript has been published elsewhere in any form or language and has not been submitted to more than one journal for simultaneous consideration.
Conflicts of Interest/Competing Interests
The authors have no conflicts of interest to declare that are relevant to the content of this article.
Consent to Participate
Not applicable.
Consent for Publication
Not applicable.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Krishnan, T., Purushothaman, R. Characterization of Fly Ash Sources in the Synthesis of Geopolymer. Silicon 14, 2635–2646 (2022). https://doi.org/10.1007/s12633-021-01048-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-021-01048-w