Abstract
A spherical Fe matrix composite powder containing a high volume fraction (82vol%) of fine TiC reinforcement was produced using a novel process combining in situ synthesis and plasma techniques. The composite powder exhibited good sphericity and a dense structure, and the fine sub-micron TiC particles were homogeneously distributed in the α-Fe matrix. A TiC–Fe cermet was prepared from the as-prepared spherical composite powder using powder metallurgy at a low sintering temperature; the product exhibited a hardness of HRA 88.5 and a flexural strength of 1360 MPa. The grain size of the fine-grained TiC and special surface structure of the spherical powder played the key roles in the fabrication process.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
H.C. Man, S. Zhang, F.T. Cheng, and T.M. Yue, In situ synthesis of TiC reinforced surface MMC on Al6061 by laser surface alloying, Scripta Mater., 46(2002), No. 3, p. 229.
S.F. Wei, K.Q. Feng, H.S. Chen, J. Xiong, H.Y. Fan, G.M. Zhang, and H. Wang, Combustion synthesis of TiC/Fe–Cu composites under an electric field, J. Alloys Compd., 541(2012), p. 186.
H. Zhang, Y. Zou, Z.D. Zou, and C.W. Shi, Effects of chromium addition on microstructure and properties of TiC–VC reinforced Fe-based laser cladding coatings, J. Alloys Compd., 614(2014), p. 107.
S. Corujeira Gallo, N. Alam, and R. O'Donnell, In-situ synthesis of titanium carbides in iron alloys using plasma transferred arc welding, Surf. Coat. Technol., 225(2013), p. 79.
S.C. Tjong and Z.Y. Ma, Microstructural and mechanical characteristics of in situ metal matrix composites, Mater. Sci. Eng. R, 29(2000), No. 3-4, p. 49.
K. Das, T.K. Bandyopadhyay, and S. Das, A review on the various synthesis routes of TiC reinforced ferrous based composites, J. Mater. Sci., 37(2002), No. 18, p. 3881.
L.S. Zhong, Y.H. Xu, M. Hojamberdiev, J.B. Wang, and J. Wang, In situ fabrication of titanium carbide particulates-reinforced iron matrix composites, Mater. Des., 32(2011), No. 7, p. 3790.
K. Das and T.K. Bandyopadhyay, Effect of form of carbon on the microstructure of in situ synthesized TiC-reinforced iron-based composite, Mater. Lett., 58(2004), No. 12-13, p. 1877.
J. Wang and Y.S. Wang, In-situ production of Fe–TiC composite, Mater. Lett., 61(2007), No. 22, p. 4393.
M. Razavi, M.S. Yaghmaee, M.R. Rahimipour, and S.S. Razavi-Tousi, The effect of production method on properties of Fe–TiC composite, Int. J. Miner. Process., 94(2010), No. 3-4, p. 97.
K.Q. Feng, Y. Yang, B.L. Shen, and L.B. Guo, In situ synthesis of TiC/Fe composites by reaction casting, Mater. Des., 26(2005), No. 1, p. 37.
P. Persson, A.E.W. Jarfors, and S. Savage, Self-propagating high-temperature synthesis and liquid-phase sintering of TiC/Fe composites, J. Mater. Process. Technol., 127(2002), No. 2, p. 131.
P. Rai, J.S. Park, G.G. Park, W.M. Lee, Y.T. Yu, S.K. Kang, S.Y. Moon, and B.G. Hong, Influence of carbon precursors on thermal plasma assisted synthesis of SiC nanoparticles, Adv. Powder Technol., 25(2014), No. 2, p. 640.
S. Choi, L.D.S. Lapitan Jr, Y.Y. Cheng, and T. Watanabe, Synthesis of cobalt boride nanoparticles using RF thermal plasma, Adv. Powder Technol., 25(2014), No. 1, p. 365.
H.G. Zhu, K. Dong, H. Wang, J.W. Huang, J.L. Li, and Z.H. Xie, Reaction mechanisms of the TiC/Fe composite fabricated by exothermic dispersion from Fe–Ti–C element system, Powder Technol., 246(2013), p. 456.
I. Barin, O. Kubaschewski, and O. Knacke, Thermochemical Properties of Inorganic Substances: Supplement. Springer, 2014.
R. Licheri, R. Orrù, G. Cao, A. Crippa, and R. Scholz, Self-propagating combustion synthesis and plasma spraying deposition of TiC–Fe powders, Ceram. Int., 29(2003), No. 5, p. 519.
Y. Choi and S.W. Rhee, Effect of iron and cobalt addition on TiC combustion synthesis, J. Mater. Res., 8(1993), No. 12, p. 3202.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Jj., Hao, Jj., Guo, Zm. et al. Plasma preparation and low-temperature sintering of spherical TiC–Fe composite powder. Int J Miner Metall Mater 22, 1328–1333 (2015). https://doi.org/10.1007/s12613-015-1201-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-015-1201-0