Abstract
Four Zr–Cu–Fe–Al-based bulk metallic glasses (BMGs) with Zr contents greater than 65at% and minor additions of Nb were designed and prepared. The glass forming abilities, thermal stabilities, mechanical properties, and corrosion resistance properties of the prepared BMGs were investigated. These BMGs exhibit moderate glass forming abilities along with superior fracture and yield strengths compared to previously reported Zr–Cu–Fe–Al BMGs. Specifically, the addition of Nb into this quaternary system remarkably increases the plastic strain to 27.5%, which is related to the high Poisson’s ratio and low Young’s and shear moduli. The Nb-bearing BMGs also exhibit a lower corrosion current density by about one order of magnitude and a wider passive region than 316L steel in phosphate buffer solution (PBS, pH 7.4). The combination of the optimized composition with high deformation ability, low Young’s modulus, and excellent corrosion resistance properties indicates that this kind of BMG is promising for biomedical applications.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater., 48(2000), No. 1, p. 279.
Y. Yokoyama, K. Fukaura, and A. Inoue Cast structure and mechanical properties of Zr–Cu–Ni–Al bulk glassy alloys, Intermetallics, 10(2002), No. 11–4, p. 1113.
Q.S. Zhang, W. Zhang, X.M. Wang, Y. Yokoyama, K. Yubuta, and A. Inoue, Structure, thermal stability and mechanical properties of Zr65Al7.5Ni10Cu17.5 glassy alloy rod with a diameter of 16 mm produced by tilt casting, Mater. Trans., 49(2008), No. 9, p. 2141.
A. Inoue, T. Shibata, and T. Zhang Effect of additional elements on glass transition behavior and glass formation tendency of Zr–Al–Cu–Ni alloys, Mater. Trans. JIM, 36(1995), No. 12, p. 1420.
G.Q. Zhang, Q.K. Jiang, L.Y. Chen, M. Shao, J.F. Liu, and J.Z. Jiang, Synthesis of centimeter-size Ag-doped Zr–Cu–Al metallic glasses with large plasticity, J. Alloys Compd., 424(2006), No. 1–4, p. 176.
A. Inoue, T. Zhang, M.W. Chen, and T. Sakurai, Mechanical properties of bulk amorphous Zr–Al–Cu–Ni–Ag alloys containing nanoscale quasicrystalline particles, Mater. Trans. JIM, 40(1999), No. 12, p. 1382.
J.K. Lee, G. Choi, D.H. Kim, and W.T. Kim, Formation of icosahedral phase from amorphous Zr65Al7.5Cu12.5Ni10Ag5 alloys, Appl. Phys. Lett., 77(2000), No. 7, p. 978.
W.L. Johnson, Bulk glass-forming metallic alloys: science and technology, MRS Bull., 24(1999), No. 10, p. 42.
T.A. Waniuk, J. Schroers, and W.L. Johnson Critical cooling rate and thermal stability of Zr–Ti–Cu–Ni–Be alloys, Appl. Phys. Lett., 78(2001), No. 9, p. 1213.
B.Y. Zhang, X.H. Chen and X. D. Hui A coating thickness controlling model in continuously fabricating metallic glass-coated composite wires, Int. J. Miner. Metall. Mater., 20(2013), No. 5, p. 456.
K.F. Jin and J.F. Löffler, Bulk metallic glass formation in Zr–Cu–Fe–Al alloys, Appl. Phys. Lett., 86(2005), No. 24, p. 241909.
Q.S. Zhang, W. Zhang, and A. Inoue Ni-free Zr–Fe–Al–Cu bulk metallic glasses with high glass-forming ability, Scripta Mater., 61(2009), No. 3, p. 241.
Q.S. Zhang, W. Zhang, D.V. Louuzguine, and A. Inoue, High glass-forming ability and unusual deformation behavior of new Zr–Cu–Fe–Al bulk metallic glasses, Mater. Sci. Forum, 654-656(2010), p. 1042.
K. Mondal, T. Ohkubo, T. Mukai, and K. Hono, Glass forming ability and mechanical properties of quinary Zr-based bulk metallic glasses, Mater. Trans., 48(2007), No. 6, p. 1322.
G.W.C. Kaye and T.H. Laby, Tables of Physical and Chemical Constants, Longman, London, 1921.
X.H. Chen, B.Y. Zhang, and X.D. Hui Effect of Nb on the corrosion behavior of continuous bulk metallic glass-coated steel wire composites. Int. J. Miner. Metall. Mater., 20(2013), No. 6, p. 589.
A. Inoue and A. Takeuchi, Recent development and application products of bulk glassy alloys, Acta Mater., 59(2011), No. 6, p. 2243.
H.E. Kissinger, Reaction kinetics in differential thermal analysis, Anal. Chem., 29(1957), No. 11, p. 1702.
L. Liu, C.L. Qiu, Q. Chen, K.C. Chan, and S.M. Zhang, Deformation behavior, corrosion resistance, and cytotoxicity of Ni-free Zr-based bulk metallic glasses, J. Biomed. Mater. Res. A, 86A(2007), No. 1, p. 160.
Q.S. Zhang, W. Zhang, G.Q. Xie, D.V. Louzguine-Luzgin, and A. Inoue, Stable flowing of localized shear bands in soft bulk metallic glasses, Acta Mater., 58(2010), No. 3, p. 904.
Y. Yokoyama, K. Fujita, A.R. Yavari, and A. Inoue, Malleable hypoeutectic Zr–Ni–Cu–Al bulk glassy alloys with tensile plastic elongation at room temperature, Philos. Mag. Lett., 89(2009), No. 5, p. 322.
N.B. Hua, S.J. Pang, Y. Li, J.F. Wang, R. Li, K. Georgarakis, A.R. Yavari, G. Vaughan, and T. Zhang, Ni- and Cu-free Zr–Al–Co–Ag bulk metallic glasses with superior glass-forming ability, J. Mater. Res., 26(2011), No. 4, p. 539.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Ss., Wang, Yl., Wu, Yd. et al. High plastic Zr–Cu–Fe–Al–Nb bulk metallic glasses for biomedical applications. Int J Miner Metall Mater 22, 648–653 (2015). https://doi.org/10.1007/s12613-015-1118-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-015-1118-7