Abstract
Ionic polymer metal composite (IPMC) is a kind of ionic electroactive polymer (EAP) smart material that can exhibit conspicuous deflection with low external voltages (~ 5 V). It can be cut in various sizes and shapes, and used and applied in robots and artificial muscles with the capability in aquatic operation. An IPMC strip can be modeled as a cantilever beam with a loading distribution on the surface. Nevertheless, the loading distribution is non-uniform due to the imperfect surface conductivity that causes four different imaginary loading distributions employed in our structural model. The difference can be up to 5 times (3:8 mm to 19 mm). In this paper, a novel linear time-variant (LTV) model is introduced and applied to model an IPMC system. This modeling method is different from previous linear time-invariant (LTI) models because the internal environment of IPMC may be unsteady due to mobile cations with water molecules. In addition, the influence of surface conductivity is simulated and proven based on this model. Finally, by applying this novel modeling method, hysteresis that exists in IPMC and affects the relationship between the output deflection and the corresponding input voltage, such as 0:1-, 0:2-, and 0:3-rad/s sinusoidal waves, has been shown and simulated.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
K. J. Kim and S. Tadokoro ed., Electroactive Polymers for Robotic Applications: Artificial Muscles and Sensors, Baker & Taylor Books, New York, NY, 2007.
Z. Chen and X. Tan, “A control-oriented and physicsbased model for ionic polymer-metal composite actuators,” IEEE/ASME Transactions on Mechatronics, vol. 13, no. 5, pp. 519–529, Oct. 2008.
M. A. Janaideh, S. Rakheja, and C.-Y. Su, “An analytical generalized Prandtl-Ishlinskii model inversion for hysteresis compensation in micropositioning control,” IEEE/ASME Transactions on Mechatronics, vol. 16, no. 4, pp. 734–744, Aug. 2011.
K. Yun and W.-J. Kim, “System identification and microposition control of ionic polymer metal composite for threefinger-gripper manipulation,” Journal of Systems and Control Engineering, vol. 220, no. 7, pp. 539–551, Nov. 2006.
Y.-C. Chang and W.-J. Kim, “Aquatic ionic-polymermetal-composite insectile robot with multi-DOF legs,” IEEE/ASME Transactions on Mechatronics, vol. 18, no. 2, pp. 547–555, Apr. 2013.
C. Bonomo, L. Fortuna, P. Giannone, and S. Graiani, “A circuit to model the electrical behavior of an ionic polymer-metal composite,” IEEE Transactions on Circuits and Systems-I: Regular Papers, vol. 53, no. 2, pp. 338–350, Feb. 2006.
T. Shoa, D. S. Yoo, K. Walus, and J. D. W. Madden, “A dynamic electromechanical model for electrochemically driven conducting polymer actuators,” IEEE/ASME Transactions on Mechatronics, vol. 16, no. 1, pp. 42–49, Feb. 2011.
M. Grossard, M. Boukallel, N. Chaillet, and C. Rotinat-Libersa, “Modeling and robust control strategy for a control-optimized piezoelectric microgripper,” IEEE/ASME Transactions on Mechatronics, vol. 16, no. 4, pp. 674–683, Aug. 2011.
T. Ganley, D. L. S. Hung, G. Zhu, and X. Tan, “Modeling and inverse compensation of temperature-dependent ionic polymer–metal composite sensor dynamics,” IEEE/ASME Transaction on Mechatronics, vol. 16, no. 1, pp. 80–89, Feb. 2011.
S. Lee, H. C. Park, and K. J. Kim, “Equivalent modeling for ionic polymer-metal composite actuators based on beam theories,” Smart Materials and Structures, vol. 14, no. 6, pp. 1363–1368, Dec. 2005.
S. Lee, K. J. Kim, and I.-S. Park, “Modeling and experiment of a muscle-like linear actuator using an ionic polymer-metal composite and its actuation characteristics,” Smart Materials and Structures, vol. 16, no. 3, pp. 583–588, Jun. 2007. [click]
G. D. Bufalo, L. Placidi, and M. Porfiri, “A mixture theory framework for modeling the mechanical actuation of ionic polymer metal composites,” Smart Materials and Structures, vol. 17, no. 4, pp. 1–14, Aug. 2008.
Z. Chen, X. Tan, A. Will, and C. Ziel, “A dynamic model for ionic polymer-metal composite sensors,” Smart Materials and Structures, vol. 16, no. 4, pp. 1477–1488, Aug. 2007. [click]
C. Bonomo, L Fortuna, P Giannone, S Graziani, and S Strazzeri, “A nonlinear model for ionic polymer metal composites as actuators,” Smart Materials and Structures, vol. 16, no. 1, pp. 1–12, Feb. 2007.
S. J. Kim, S.-M. Kim, K. J. Kim, and Y. H. Kim, “An electrode model for ionic polymer-metal composites,” Smart Materials and Structures, vol. 16, no. 6, pp. 2286–2295, Dec. 2007.
Y.-C. Chang, and W.-J. Kim, “A linear time-variant (LTV) ionic-polymer-metal-composite (IPMC) electrical model with effects of capacitors and resistors,” Proceedings of ASME 2015 Dynamic Systems and Control Conference, Columbus, Ohio, USA, Paper No. 9648.
S. Nemat-Nasser and Y. Wu, “Comparative experimental study of ionic polymer-metal composites with different backbone ionomers and in various cation forms,” Journal of Applied Physics, vol. 93, no. 9, pp. 5255–5267, May 2003.
A. Agarwal and J. H., Lang, Foundations of Analog and Digital Electronic Circuits. Morgan Kaufmann Publishers, San Mateo, CA, 2005.
S. Nemat-Nasser and Y. Wu, “Tailoring the actuation of ionic polymer–metal composites,” Smart Materials and Structures, vol. 15, no. 4, pp. 909–923, Aug. 2006.
N. Jin, B. Wang, K. Bian, Q. Chen, and K. Xiong, “Performance of ionic polymer-metal composite (IPMC) with different surface roughening methods,” Frontier Mechanical Engineering in China, vol. 4, no. 4, pp. 430–435, Dec. 2009. [click]
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Guest Editor Sungwan Kim. The authors thank Prof. James Batteas and his students, Dr. Yang Chan and Dr. Albert Wan in the Department of Chemistry, Texas A&M University for providing with facilities and instruction for manufacturing the IPMC samples.
Yi-chu Chang received the B.S. amd M.S. degrees in mechanical and electrical engineering from National Taiwan University, Taipei, Taiwan, in 2003 and 2005, respectively. In 2013, he received his Ph.D. degree in the Department of Mechanical Engineering, Texas A&M University (TAMU), College Station. He had worked as a Postdoctoral researcher at Texas A&M University. Since 2014, he has been an automation engineer with the Department of Automation at Miller-Eads, Co., Inc, in Indianapolis, IN. His research interests include robotics design and control, applications of IPMC, real-time systems, and advanced robotics.
Won-jong Kim received the B.S. (summa cum laude) and M.S. degrees in control and instrumentation engineering from Seoul National University, Seoul, Korea, in 1989 and 1991, respectively, and the Ph.D. degree in electrical engineering and computer science from the Massachusetts Institute of Technology (MIT), Cambridge, in 1997. Since 2000, he has been with the Department of Mechanical Engineering, Texas A&M University (TAMU), College Station, where currently he is Associate Professor. He is the holder of three U.S. patents on precision positioning systems. He is Fellow of ASME, Senior Member of IEEE, and Member of Pi Tau Sigma. Prof. Kim is Associate Editor of International Journal of Control, Automation, and Systems, and Asian Journal of Control, and was Associate Editor of ASME Journal of Dynamic Systems, Measurement and Control and Technical Editor of IEEE/ASME Transactions on Mechatronics.
Rights and permissions
About this article
Cite this article
Chang, Yc., Kim, Wj. An electrical model with equivalent elements in a time-variant environment for an ionic-polymer-metal-composite system. Int. J. Control Autom. Syst. 15, 45–53 (2017). https://doi.org/10.1007/s12555-016-0460-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12555-016-0460-5