Abstract
An internal gerotor pump is used to enhance the oil hydraulics of machine tools, automotive engines and compressor. In particular, this type of pump is used to supply lubricants in an automotive engine. Recently, improvements in automobile fuel efficiency and the reduction of noise have become critical issues. Thus, gerotor internal oil pumps have been studied for high flow rate and low noise through designs of multiple combined lobe shapes. In this study, in order to address the problems of existing oil pumps, design of a new lobe shape with 2-ellipses was developed in order to decrease a sharp change of curvature. Performance parameters of an improved gerotor (2-ellipses) were calculated and compared with those of the existing gerotor (circle and 3-ellipses). Also, we performed a computational fluid dynamics (CFD) analysis of an oil pump with the improved gerotor 2-ellipses-combined lobe shape. By using the commercial software ANSYS CFD, geometric parameters relating to the port shape, which affect the performance of flow rate and irregularity, were investigated. A re-design of the port shape was performed in order to improve fuel efficiency and reduce the noise of the oil pump.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Jung, S.-Y., Bae, J.-H., Kim, M.-S., and Kim, C., “Development of a New Gerotor for Oil Pumps with Multiple Profiles,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 5, pp. 835–841, 2011.
Mimmi, G. C. and Pennacchi, P. E., “Non-Undercutting Conditions in Internal Gears,” Mechanism and Machine Theory, Vol. 35, No. 4, pp. 477–490, 2000.
Demenego, A., Vecchiato, D., Litvin, F. L., Nervegna, N., and Mancó, S., “Design and Simulation of Meshing of a Cycloidal Pump,” Mechanism and Machine Theory, Vol. 37, No. 3, pp. 311–332, 2002.
Kim, J.-H., Kim, C., and Chang, Y. J., “Optimum Design on Lobe Shapes of Gerotor Oil Pump,” Journal of Mechanical Science and Technology, Vol. 20, No. 9, pp. 1390–1398, 2006.
Bae, J. H., Lee, H. R., and Kim, C., “Optimal Design of Gerotor with Combined Profiles (Three-Ellipse and Ellipse-Involute-Ellipse) Using Rotation and Translation Algorithm,” Transactions of the Korean Society of Mechanical Engineers A, Vol. 39, No. 2, pp. 169–177, 2015.
Bae, J. H., Kwak, H. S., San, S., and Kim, C., “Design and CFD Analysis of Gerotor with Multiple Profiles (Ellipse-Involute-Ellipse Type and 3-Ellipses Type) Using Rotation and Translation Algorithm,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, DOI No. 10.1177/0954406215583888, 2015.
Ding, H., Visser, F. C., Jiang, Y., and Furmanczyk, M., “Demonstration and Validation of a 3D CFD Simulation Tool Predicting Pump Performance and Cavitation for Industrial Applications,” Journal of Fluids Engineering, Vol. 133, No. 1, Paper No. 011101, 2011.
Frosina, E., Senatore, A., Buono, D., Manganelli, M. U., and Olivetti, M., “A Tridimensional CFD Analysis of the Oil Pump of an High Performance Motorbike Engine,” Energy Procedia, Vol. 45, pp. 938–948, 2014.
Kumar, M. S. and Manonmani, K., “Computational Fluid Dynamics Integrated Development of Gerotor Pump Inlet Components for Engine Lubrication,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 224, No. 12, pp. 1555–1567, 2010.
Hsieh, C.-F., “Flow Characteristics of Gerotor Pumps with Novel Variable Clearance Designs,” Journal of Fluids Engineering, Vol. 137, No. 4, Paper No. 041107, 2015.
Kim, S.-Y., Nam, Y.-J., and Park, M.-K., “Design of Port Plate in Gerotor Pump for Reduction of Pressure Pulsation,” Journal of Mechanical Science and Technology, Vol. 20, No. 10, pp. 1626–1637, 2006.
Nam, K.-W., Jo, S.-H., and Park, J.-I., “Numerical Simulation in the IC Engine Lubricating Gerotor Oil Pump,” Transactions of the Korean Society of Mechanical Engineers B, Vol. 30, No. 10, pp. 1019–1025, 2006.
Kwak, H. S., Li, S. H., and Kim, C., “Performance Improvement of Oil Pump by Design of Gerotor (Combined Profile-Two Ellipses) and Port,” J. Korean Soc. Precis. Eng., Vol. 33, No. 3, pp. 207–216, 2016.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kwak, HS., Li, SH. & Kim, C. Performance improvement of an oil pump: Design of port assembled with gerotor (2-ellipses-combined lobe). Int. J. Precis. Eng. Manuf. 17, 1017–1024 (2016). https://doi.org/10.1007/s12541-016-0124-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-016-0124-7