Abstract
The effect of yttrium (< 5.5 at%) on the martensite-austenite phase transformation temperatures, microstructural evolution, and hot workability of Ti-Ni-Hf high-temperature shape memory alloys is investigated. For these purposes, differential scanning calorimetry, hot compression, and thermo-gravimetric tests are conducted. The phase transformation temperatures are not noticeably influenced by the addition of yttrium up to 4.5 at%. Furthermore, the hot workability is not significantly affected by the yttrium addition up to 1.0 at%. However, when the amount of yttrium addition exceeds 1.0 at%, the hot workability deteriorates significantly. In contrast, remarkable improvement in the high temperature oxidation resistance due to the yttrium addition is demonstrated. The total thickness of the oxide layers is substantially thinner in the Y-added specimen. In particular, the thickness of (Ti,Hf) oxide layer is reduced from ~200 µm to ~120 µm by the addition of 0.3 at% Y.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
G. S. Firstov, J. Van Humbeeck, and Y. N. Koval, Scr. Mater. 50, 243 (2004).
G. S. Firstov, J. Van Humbeeck, and Y. N. Koval, Mater. Sci. Eng. A 378, 2 (2004).
S.-W. Choi, H.-S. Lee, Y.-M. Jeon, T.-H. Nam, J.-T. Yeom, S.-W. Kim, C.-H. Park, J.-K. Hong, C.-S. Oh, and J. H. Kim, Korean J. Met. Mater. 53, 151 (2015).
C. C. Wojcik, J. Mater. Eng. Perf. 18, 511 (2009).
M. Belbasi, M. T. Salehi, S. A. A. A. Mousavi, and S. M. Ebrahimi, Mater. Sci. Eng. A 560, 96 (2013).
P. E. Thoma and J. J. Boehm, Mater. Sci. Eng. A 273-275, 385 (1999).
J. H. Kim, C. H. Park, S. W. Kim, J. K. Hong, C.-S. Oh, Y. M. Jeon, K. M. Kim, and J. T. Yeom, J. Nano. Nanotech. 14, 9548 (2014).
M. J. Jones and F. J. Humphreys, Acta Mater. 51, 2149 (2003).
J. H. Kim, K. M. Kim, T. S. Byun, D. W. Lee, and C. H. Park, Thermochim. Acta 579, 1 (2014).
P. Zywicki, T. Abe, H. Garbacz, Y. Yamabe-Mitarai, and K. J. Kurzydlowski, Met. Mater. Int. 21, 617 (2015).
J. H. Kim, J. T. Yeom, J. K. Hong, S. Y. Shim, S. G. Lim, and N. K. Park, Met. Mater. Int. 16, 669 (2010).
K. C. Atli, I. Karaman, R. D. Noebe, A. Garg, Y. I. Chumlyakov, and I. V. Kireeva, Metall. Mater. Trans. 41A, 2485 (2010).
Z. Liu, Y. Hu, and X. Liu, Acta Metall. Sin. 23, 277 (2010).
O. Semenova, T. Khomko, and V. Petyukh, Powder Metall. Met. C+ 46, 274 (2007).
K. M. Kim, J. T. Yeom, H.-S. Lee, S.-Y. Yoon, and J. H. Kim, Thermochim. Acta 583, 1 (2014).
Y. V. Kudryavtsev and E. Semenova, Powder Metall. Met. C+ 48, 700 (2009).
Z. X. Jiang, K. Kim, J. Lerma, D. Sieloff, H. Tseng, R. I. Hegde, T. Y. Luo, J. Y. Yang, D. H. Triyoso, and P. J. Tobin, Appl. Surf. Sci. 252, 7172 (2006).
M. Xueli, H. Kai, and W. Wenwu, J. Semicond. 34, 7 (2013).
Y. Zhuang, Y. Luo, and W. He, J. Alloy. Compd. 298, 135 (2000).
Y. I. Son, C. H. Chung, R. R. Gowkanapalli, C. H. Moon, and J. S. Park, Met. Mater. Int. 21, 1 (2015).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Kim, J.H., Kim, K.M., Yeom, J.T. et al. Effect of yttrium on martensite-austenite phase transformation temperatures and high temperature oxidation kinetics of Ti-Ni-Hf high-temperature shape memory alloys. Met. Mater. Int. 22, 204–208 (2016). https://doi.org/10.1007/s12540-016-5130-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-016-5130-x