Abstract
As one of the most basic parameters, manikin body feature could be an important factor influencing the airflow and temperature fields in indoor environments. This study aims to improve the computational efficiency by optimising and simplifying manikin body features. A 3D scanned computer-simulated person (CSP) with extremely detailed body features was employed, followed by two simplified CSP models with different approaches. One of the simplified models was rebuilt based on the skeleton of the 3D scanned model with very limited body features, while the other model was simplified by removing some of the features from the 3D scanned model. All CSPs were tested under quiescent condition, followed by further comparisons under displacement and mixed ventilations. The outcomes indicated that the geometric difference of manikin body would have significant impact on the airflow patterns near manikin bodies, whilst it has very limited influence on the temperature field. The difference of body features could significantly affect the development of thermal plume, which mainly reflected above the manikin head. Also, change of CSP body features due to simplifications may become more sensitive to the predicted results under mixed ventilation, as a result of fewer interactions between the thermal plume and injected airflow.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Chen F, Yu SCM, Lai ACK (2006). Modeling particle distribution and deposition in indoor environments with a new drift–flux model. Atmospheric Environment, 40: 357–367.
Chen, Q (1995). Comparison of different k–ε models for indoor air flow computations. Numerical Heat Transfer, Part B: Fundamentals, 28: 353–369.
Eça L, Hoekstra M (2014). A procedure for the estimation of the numerical uncertainty of CFD calculations based on grid refinement studies. Journal of Computational Physics, 262: 104–130.
Hayashi T, Ishizu Y, Kato S, Murakami S (2002). CFD analysis on characteristics of contaminated indoor air ventilation and its application in the evaluation of the effects of contaminant inhalation by a human occupant. Building and Environment, 37: 219–230.
Hyun S, Kleinstreuer C (2001). Numerical simulation of mixed convection heat and mass transfer in a human inhalation test chamber. International Journal of Heat and Mass Transfer, 44: 2247–2260.
King Se CM, Inthavong K, Tu J (2010). Inhalability of micron particles through the nose and mouth. Inhalation Toxicology, 22: 287–300.
Lai ACK, Thatcher TL, Nazaroff WW (2000). Inhalation transfer factors for air pollution health risk assessment. Journal of the Air & Waste Management Association, 50: 1688–1699.
Li X, Yan Y, Tu J (2015). The simplification of computer simulated persons (CSPs) in CFD models of occupied indoor spaces. Building and Environment, 93: 155–164.
Li X, Inthavong K, Tu J (2016). Numerical investigation of micron particle inhalation by standing thermal manikins in horizontal airflows. Indoor and Built Environment, 25: 357–370.
Licina D, Pantelic J, Melikov A, Sekhar C, Tham KW (2014). Experimental investigation of the human convective boundary layer in a quiescent indoor environment. Building and Environment, 75: 79–91.
Martinho N, Lopes A, Gameiro Da Silva M (2012). Evaluation of errors on the CFD computation of air flow and heat transfer around the human body. Building and Environment, 58: 58–69.
Myrakami S, Kato S, Zeng J (2000). Combined simulation of airflow, radiation and moisture transport for heat release from a human body. Building and Environment, 35: 489–500.
Nilsson H, Brohus H, Nielsen P (2007). Benchmark Test for a Computer Simulated Person-Manikin heat loss for thermal comfort evaluation: Version of February 2007. Aalborg University Denmark & Gavle University Sweden.
Poussou SB, Mazumdar S, Plesniak MW, Sojka PE, Chen Q (2010). Flow and contaminant transport in an airliner cabin induced by a moving body: Model experiments and CFD predictions. Atmospheric Environment, 44: 2830–2839.
Qian H, Li Y, Nielsen PV, Hyldgaard CE (2008). Dispersion of exhalation pollutants in a two-bed hospital ward with a downward ventilation system. Building and Environment, 43: 344–354.
Roache RJ (1994). Perspective a method for uniform reporting of grid refinement studies. Journal of Fluids Engineering, 116: 405–413.
Ruzic DA, Bikic SM (2014). An approch to the modelling of a virtual thermal manikin. Thermal Science, 18: 1413–1423.
Salmanzadeh M, Zahedi G, Ahmadi G, Marr DR, Glauser M (2012). Computational modeling of effects of thermal plume adjacent to the body on the indoor airflow and particle transport. Journal of Aerosol Science, 53: 29–39.
Sorensen DN, Voigt LK (2003). Modelling flow and heat transfer around a seated human body by computational fluid dynamics. Building and Environment, 38: 753–762.
Zhu S, Kato S, Murakami S, Hayashi T (2005). Study on inhalation region by means of CFD analysis and experiment. Building and Environment, 40: 1329–1336.
Acknowledgements
The financial supports provided by the National Basic Research Program (973) of China (No. 2012CB720100) and the National Natural Science Foundation of China (No. 21277080) are gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yan, Y., Li, X. & Tu, J. Numerical investigations of the effects of manikin simplifications on the thermal flow field in indoor spaces. Build. Simul. 10, 219–227 (2017). https://doi.org/10.1007/s12273-016-0319-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-016-0319-y