Abstract
The rollover safety of Three-Wheel Vehicles (TWVs) is critical because of its instability in severe steering, side collisions and flip-over compared to Four-Wheel Vehicles (FWVs). In order to evaluate the rollover safety, the roof crash conditions in various types of accidents are investigated to provide a reliable roof structure. In order to prepare for roof crash conditions for TWVs, investigation has been carried out in aids of multibody dynamic simulations and motion simulations. According to the simulation, the rear region of a TWV’s roof crashes onto the pavement in case of the rollover. To design an optimal roof structure of TWVs, topology optimization is utilized based on the roof crash conditions. The preliminary design of the roof structure from topology optimization is modified into eight different designs by changing the shape of a roof structure. In this paper, both a static crash test and a dynamic crash test are simulated to obtain the best design of the roof structure of TWVs. The dynamic crash test of a roof structure is essential because of the rate dependency of materials and evaluation of real crashworthiness. From the preliminary designs, an optimal shape of a roof structure is determined considering possible cases of actual rollover. The optimal shape shows that the front members of the cross-bar reinforcement and window screen member need to be straight and the rear member needs to be arch-shaped.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Bernquist, J. (2004). Safety Cage Design in the VOLVO XC90. American Iron and Steel Institute, Great Design in Steel Seminar, Livonia, Michigan, USA.
Cho, Y. H. and Han, B. K. (2012). Roof strength performance improvement enablers. Int. J. Automotive Technology13, 5, 775–781.
Friedman, D. and Grzebieta, R. (2009). Vehicle roof geometry and its effect on rollover roof performance. Proc. 21st Int. Technical Conf. Enhanced Safety of Vehicles (ESV), Paper (No. 07-0361).
Friedman, D. and Nash, C. (2001). Advanced roof design for rollover protection. Proc. 17th Int. Technical Conf. Enhanced Safety of Vehicles. Amsterdam, The Netherlands.
Friedman, D., Mattos, G. and Paver, J. (2010). Characterizing the injury potential of a real world rollover. Proc. ICRASH Conf, Washington, D.C., USA.
Garrott, W., Forkenbrock, G. and Howe, J. (1999). An Experimental Examination of Selected Manuvers that May Induce On-road Untripped, Light Vehicle Rollover - Phase II of NHTSA’s 1997-1998 Vehicle Rollover Research Program. NHTSA. No. HS-808 977, VRTC-86-0421.
Gatilao, F., Roesser, G. and Reaume, B. (2010). An overview of FMVSS 216a - Roof crush resistance testing. SAE Paper No. 2010-01-1020.
Han, B. K., Lee, E. D. and Jang, S. M. (2015). Relationship of the roof strength resistance with the displacement of top-end of A-pillar in CRIS test. Int. J. Automotive Technology16, 4, 603–610.
Hubele, N. F. (2009). A critical review of some roof crush studies based on rollover field accident data using meta¬analysis. Proc. 19th Canadian Multidisciplinary Road Safety Conf, Saskatoon, Canada.
Huh, H., Yoon, J. H., Park, C. G., Kang, J. S., Huh, M. Y. and Kang, H. G (2010). Correlation of microscopic structures to the strain rate hardening of SPCC steel. Int. J. Mechanical Sciences52, 5, 745–753.
Mao, M., Chirwa, E. C. and Chen, T. (2007). Reinforcement of vehicle roof structure system against rollover occupant injuries. Int. J. Crashworthiness12, 1, 41–55.
NHTSA (2011). Traffic Safety Facts 2009 a Compilation of Motor Vehicle Crash Data from the Fatality Analysis Reporting System and the General Estimates System. National Highway Traffic Safety Administration. 20590.
Rechnitzer, G, Lane, J., McIntosh, A. S. and Scott, G. (1998). Serious neck injury in rollovers - Is roof crush a factor?. Int. J. Crashworthiness3, 3, 286–294.
SAE (1991). Inverted Vehicle Drop Test Procedure - SAE J996, Society of Automotive Enginners. J996_199101.
Yoon, H.-S., Lee, K.-T. and Ahn, S.-H. (2013). Measurement of roof deformation caused by vehicle rollover. Int. J. Automotive Technology14, 4, 667–674.
Acknowledgement
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIP) (No. 2010-0028680).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Yoo, J., Huh, H. Optimization of Three-Wheel Vehicle Roof Structures Against Rollover Accidents. Int.J Automot. Technol. 21, 795–804 (2020). https://doi.org/10.1007/s12239-020-0077-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-020-0077-9