Abstract
Surfaces of previously synthesized Hydroxyapatite particles (HAP) have been modified with polyethylene glycol functional silane (PEG-400Si). For the surface modification of HAP, firstly, synthesis of PEG-400Si was performed by urethane reaction of hydroxyl and isocyanate groups. Then, HAP was synthesized by sol-gel method. Afterwards, surface modification of HAP was realized with PEG-400Si. SEM, TEM, XRD and FTIR analyses were utilized to characterize the morphology and structural properties of the synthesized and modified particles. Results revealed that the surface of HAP was modified successfully and the crystal structure of HAP was not changed after modification. Electrospinning process was conducted to obtain unmodified and modified HAP incorporated nanofibrous biomembranes and the characteristics and biological performances of these membranes have been compared to each other. SEM analysis presented that defect-free and round shape nanofibers obtained and the fiber diameter ranged from 230±114 nm to 760±291 nm. In vitro biological evaluations revealed that all electrospun nanofibrous biomembranes were nontoxic and the one with PCL/PEG-400Si-HAP exhibited greatest cellular protein expression approximately 1.5 times higher than the PCL biomembrane for 24 h, 48 h and 72 h.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
R. Erdem, M. Yüksek, E. Sancak, O. Atak, M. Erginer, L. Kabasakal, and A. Beyit, J. Text. Inst., 108, 935 (2016).
J. P. Vacanti and R. Langer, The Lancet, 354, S32 (1999).
H. S. Koh, T. Yong, C. K. Chan, and S. Ramakrishna, Biomaterials, 29, 3574 (2008).
Z. Ma, M. Kotaki, R. Inai, and S. Ramakrishna, Tissue Eng., 11, 101 (2005).
X. Liu, Y. Won, and P. X. Ma, Biomaterials, 27, 3980 (2006).
K. M. Woo, V. J. Chen, and P. X. Ma, J. Biomed. Mater. Res. Part A, 67, 531 (2003).
E. M. Christenson, K. S. Anseth, J. J. van den Beucken, C. K. Chan, B. Ercan, J. A. Jansen, C. T. Laurencin, W. J. Li, R. Murugan, L. S. Nair, S. Ramakrishna, R. S. Tuan, T. J. Webster, and A. G. Mikos, J. Orthop. Res., 25, 11 (2007).
S. Liao, R. Murugan, C. K. Chan, and S. Ramakrishna, J. Mech. Behav. Biomed. Mater., 1, 252 (2008).
R. Erdem and M. Akalın, J. Ind. Text., 44, 553 (2013).
D. H. Reneker and I. Chun, Nanotechnology, 7, 216 (1996).
S. Verrier, J. J. Blaker, V. Maquet, L. L. Hench, and A. R. Boccaccini, Biomaterials, 25, 3013 (2004).
K. Zhang, Y. Wang, M. A. Hillmyer, and L. F. Francis, Biomaterials, 25, 2489 (2004).
E. Nejati, H. Mirzadeh, and M. Zandi, Compos. Part A: Appl. Sci. Manuf., 39, 1589 (2008).
R. Zhang and P. X. Ma, J. Biomed. Mater. Res., 44, 446 (1999).
R. Zhang and P. X. Ma, Macromol. Biosci., 4, 100 (2004).
S. M. Zhang, J. Liu, W. Zhou, L. Cheng, and X. D. Guo, Curr. Appl. Phys., 5, 516 (2005).
H. W. Choi, H. J. Lee, K. J. Kim, H. M. Kim, and S. C. Lee, J. Colloid Interface Sci., 304, 277 (2006).
H. P. Zhang, X. Lu, Y. Leng, L. Fang, S. Qu, B. Feng, J. Weng, and J. Wang, Acta Biomater, 5, 1169 (2009).
H. Tanaka, A. Yasukawa, K. Kandori, and T. Ishikawa, Colloids Surf. A: Physicochem. Eng. Asp., 125, 53 (1997).
L. Borum-Nicholas and O. C. Wilson, Biomaterials, 24, 3671 (2003).
X. Zhang, D. Zeng, N. Li, J. Wen, X. Jiang, C. Liu, and Y. Li, Scientific Reports, 6, 19361 (2016).
B. H. Atak, B. Buyuk, M. Huysal, S. Isik, M. Senel, W. Metzger, and G. Cetin, Carbohydr. Polym., 164, 200 (2017).
S. Rehman, K. Khan, M. Mujahid, and S. Nosheen, Mater. Sci. Eng. C Mater. Biol. Appl., 58, 675 (2016).
Y. Arima and H. Iwata, Biomaterials, 28, 3074 (2007).
W. H. Tse, L. Gyenis, D. W. Litchfield, and J. Zhang, J. Biomater. Appl., 31, 1087 (2017).
J. H. Lee, H. B. Lee, and J. D. Andrade, Prog. Polym. Sci., 21, A–3B (1997).
R. Williams in “Surface Modification of Biomaterials Methods Analysis and Applications”, 1st ed. (A. Rhodes, S. S. Sandhu, and S. J. Onis Eds.), Chapter 2, pp.39–55, Woodhead Publishing, Cambridge, UK, 2011.
S. A. Park, S. H. Lee, and W. D. Kim, Bioprocess Biosyst Eng., 34, 505 (2011).
Y. S. Cho, S. Choi, S.-H. Lee, K. K. Kim, and Y.-S. Cho, Eur. Polym. J., 113, 340 (2019).
F. E. Wiria, K. F. Leong, C. K. Chua, and Y. Liu, Acta Biomater, 3, 1 (2007).
K. Szustakiewicz, M. Gazińska, B. Kryszak, M. Grzymajło, J. Pigłowski, R. J. Wiglusz, and M. Okamoto, Eur. Polym. J., 113, 313 (2019).
P. Yilgor, R. A. Sousa, R. L. Reis, N. Hasirci, and V. Hasirci, Macromolecular Symposia, 269, 92 (2008).
P. Gehron Robey in “Principles of Bone Biology”, (J. P. Bilezikian, L. G. Raisz, and T. J. Martin Eds.), 3rd ed. p.335, Academic Press, San Diego, 2008.
E. Burunkaya, Ö. Kesmez, N. Kiraz, H. E. Çamurlu, M. Asiltürk, and E. Arpaç, Thin Solid Films, 522, 238 (2012).
F. Bakan, O. Laçin, and H. Sarac, Powder Technol., 233, 295 (2013).
W. Strober, Curr. Protoc. Immunol., 21, A.3B.1 (2001).
M. M. Bradford, Analytical Biochemistry, 72, 248 (1976).
B. Sissolak, C. Zabik, N. Saric, W. Sommeregger, K. Vorauer-Uhl, and G. Striedner, Biotechnol. J., 14, 1800714 (2019).
S. Gowrishankar and S. K. Pandian, Biochim. Biophys. Acta Biomembr., 1859, 1254 (2017).
H. Kothandaraman, A. Sultan Nasar, and R. K. Lakshmi, J. Appl. Polym. Sci., 53, 31 (1994).
B. H. Stuart, “Infrared Spectroscopy: Fundamentals and Application”, p.123, Wiley, 2004.
J. Coates, Encyclopedia of Analytical Chemistry, https://doi.org/10.1002/9780470027318 (2006).
S. A. Guelcher, K. M. Gallagher, J. E. Didier, D. B. Klinedinst, J. S. Doctor, A. S. Goldstein, G. L. Wilkes, E. J. Beckman, and J. O. Hollinger, Acta Biomater., 1, 471 (2005).
Q. He, J. Zhang, J. Shi, Z. Zhu, L. Zhang, W. Bu, L. Guo, and Y. Chen, Biomaterials, 31, 1085 (2010).
F. Rubio, J. Rubio, and J. L. Oteo, Spectroscopy Letters, 31, 199 (1998).
M. Salarian, M. Solati-Hashjin, S. S. Shafiei, R. Salarian, and Z. A. Nemati, Ceram. Int., 35, 2563 (2009).
Y. Sun, G. Guo, Z. Wang, and H. Guo, Ceram. Int., 32, 951 (2006).
R. N. Panda, M. F. Hsieh, R. J. Chung, and T. S. Chin, J. Phys. Chem. Solids, 64, 193 (2003).
K. Lin, J. Chang, R. Cheng, and M. Ruan, Mater. Lett., 61, 1683 (2007).
Y. Wang, J. Chen, K. Wei, S. Zhang, and X. Wang, Mater. Lett., 60, 3227 (2006).
J. A. M. van der Houwen, G. Cressey, B. A. Cressey, and E. Valsami-Jones, J. Crystal Growth, 249, 572 (2003).
F. Ren, Y. Ding, and Y. Leng, J. Biomed. Mater. Res. A, 102, 496 (2014).
T. Lin, H. Wang, H. Wang, and X. Wang, Nanotechnology, 15, 1375 (2004).
J. Li, A. He, J. Zheng, and C. C. Han, Biomacromolecules, 7, 2243 (2006).
R. Erdem, M. İlhan, M. K. Ekmekçi, and Ö. Erdem, Appl. Surf. Sci., 421, 240 (2017).
I. Rajzer, J. Mater. Sci., 49, 5799 (2014).
S.-R. Son, N.-T. B. Linh, H.-M. Yang, and B.-T. Lee, Sci. Technol. Adv. Mater., 14, 015009 (2013).
Acknowledgements
Authors would like to thank to Prof. Dr. Ertuğrul Arpaç and his Sol-Gel research group at the Chemistry Department of Akdeniz University for their great support during the experimental stage of this study. This project was funded by Akdeniz University with the project code: FBG-2019-5005.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yavuz, E., Erdem, R., Küçüksayan, E. et al. Preparation and Characterization of Polyethylene Glycol Functional Hydroxyapatite/Polycaprolactone Electrospun Biomembranes for Bone Tissue Engineering Applications. Fibers Polym 22, 1274–1284 (2021). https://doi.org/10.1007/s12221-021-0560-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-021-0560-6