Abstract
A re-entrant hexagonal structure is the most popularly-used auxetic metamaterial providing unique deformation behavior with a negative Poisson’s ratio. In the re-entrant auxetic structure, the Poisson’s ratio varies depending on the design of the re-entrant shape and the order of deformation. In this study, the deformation behavior of re-entrant auxetic structures was investigated through experimental and numerical analyses, with a variation of the reentrant angle. The experimental results showed that the Poisson’s ratio increased as the reentrant angle decreased, and the auxetic property was maintained only while a re-entrant cell remained in a concave shape. Finite element analyses (FEAs) were also conducted to investigate the deformation behavior of the re-entrant structures, using ID-beam and 2D-continuum elements. Compared to the experimental findings, the 2D-FEA showed similar results both in the concave and convex deformation regimes whereas the 1D-FEA showed a reliable prediction only in the concave regime. Additionally, consideration of the cell curvature in the 2D-FEA provided better simulation accuracy by appropriately describing the transformation from the concave to convex regimes. The relevant Poisson’s ratio data were then statistically analyzed to obtain a bilinear regression equation as a function of the axial strain and re-entrant angle, which provides insights into the deformation behavior of re-entrant structures.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Abbreviations
- \({\nu ^ \ast }\) :
-
Apparent Poisson’s ratio
- \({\varepsilon ^ \ast }\) :
-
Apparent strain
- θ :
-
Re-entrant angle
- a :
-
Inclined ligament length
- b :
-
Vertical ligament length
- l :
-
Cell size
- w :
-
Ligament width
- R 1 :
-
Concave edge round
- R 2 :
-
Convex edge round
- P (x,y) :
-
Position vector
- c n :
-
Coefficients of the bilinear regression equation
References
D. R. Smith, J. B. Pendry and M. C. Wiltshire, Metamaterials and negative refractive index, Science, 305 (5685) (2004) 788–792.
J. Valentine, S. Zhang, T. Zentgraf, E. Ulin-Avila, D. A. Genov, G. Bartal and X. Zhang, Three-dimensional optical metamaterial with a negative refractive index, Nature, 455 (7211) (2008) 376–379.
S. Pyo and K. Park, Mechanical metamaterials for Sensor and actuator applications, International Journal of Precision Engineering and Manufacturing-Green Technology (2023) https://doi.org/10.1007/s40684-023-00549-w.
H. M. Kolken and A. A. Zadpoor, Auxetic mechanical metamaterials, RSC Advances, 7 (9) (2017) 5111–5129.
X. Ren, R. Das, P. Tran, T. D. Ngo and Y. M. Xie, Auxetic metamaterials and structures: a review, Smart Materials and Structures, 27 (2) (2018) 023001.
M. Kadic, T. Bückmann, R. Schittny, P. Gumbsch and M. Wegener, Pentamode metamaterials with independently tailored bulk modulus and mass density, Physical Review Applied, 2 (5) (2014) 054007.
W. Wu, W. Hu, G. Qian, H. Liao, X. Xu and F. Berto, Mechanical design and multifunctional applications of chiral mechanical metamaterials: a review, Materials and Design, 180 (2019) 107950.
R. Schwaiger, R. Meza and X. Li, The extreme mechanics of micro-and nanoarchitected materials, MRS Bulletin, 44 (10) (2019) 758–765.
X. Zheng, H. Lee, T. H. Weisgraber, M. Shusteff, J. DeOtte and E. B. Duoss, Ultralight, ultrastiff mechanical metamaterials, Science, 344 (6190) (2014) 1373–1377.
T. Bückmann, M. Thiel, M. Kadic, R. Schittny and M. Wegener, An elasto-mechanical unfeelability cloak made of pentamode metamaterials, Nature Communications, 5 (1) (2014) 4130.
J. H. Park and K. Park, Compressive behavior of soft lattice structures and their application to functional compliance control, Additive Manufacturing, 33 (2020) 101148.
Q. Wang, J. A. Jackson, Q. Ge, J. B. Hopkins, C. M. Spadac-cini and N. X. Fang, Lightweight mechanical metamaterials with tunable negative thermal expansion, Physical Review Letters, 117 (17) (2016) 175901.
K. P. Vemuri, F. M. Canbazoglu and P. R. Bandaru, Guiding conductive heat flux through thermal metamaterials, Applied Physics Letters, 105 (19) (2014) 193904.
J. H. You and K. Park, Design and additive manufacturing of thermal metamaterial with high thermal resistance and cooling capability, Additive Manufacturing, 41 (2021) 101947.
X. T. Wang, B. Wang, X. W. Li and L. Ma, Mechanical properties of 3D re-entrant auxetic cellular structures, International Journal of Mechanical Sciences, 131 (2017) 396–407.
H. Wang, Z. Lu, Z. Yang and X. Li, A novel re-entrant auxetic honeycomb with enhanced in-plane impact resistance, Composite Structures, 208 (2019) 758–770.
N. K. Choudhry, B. Panda and S. Kumar, In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing, Composites Part B: Engineering, 228 (2022) 109437.
J. Zhang, G. Lu, D. Ruan and Z. Wang, Tensile behavior of an auxetic structure: analytical modeling and finite element analysis, International Journal of Mechanical Sciences, 136 (2018) 143–154.
J. Zhang, G. Lu, Z. Wang, D. Ruan, A. Alomarah and Y. Durandet, Large deformation of an auxetic structure in tension: Experiments and finite element analysis, Composite Structures, 184 (2018) 92–101.
J. Huang, Q. Zhang, F. Scarpa, Y. Liu and J. Leng, In-plane elasticity of a novel auxetic honeycomb design, Composites Part B: Engineering, 110 (2017) 72–82.
S. I. Park and D. W. Rosen, Homogenization of mechanical properties for material extrusion periodic lattice structures considering joint stiffening effects, Journal of Mechanical Design, 140 (11) (2018) 111414.
K. Bertoldi, V. Vitelli, J. Christensen and M. Van Hecke, Flexible mechanical metamaterials, Nature Reviews Materials, 2 (11) (2017) 1–11.
T. Y. Kim, S. H. Park and K. Park, Development of functionally graded metamaterial using selective polymerization via digital light processing additive manufacturing, Additive Manufacturing, 47 (2021) 102254.
Y. Kim, P. C. Nguyen, H. Kim, H. J. Choi and Y. Choi, Characterization and design of two-dimensional multi-morphology cellular structures for desired deformation, Journal of Computational Design and Engineering, 10 (2) (2023) 589–601.
A. Fadeel, H. Abdulhadi, G. Newaz, R. Srinivasan and A. Mian, Computational investigation of the post-yielding behavior of 3D-printed polymer lattice structures, Journal of Computational Design and Engineering, 9 (1) (2022) 263–277.
Acknowledgments
This research was financially supported the National Research Foundation of Korea (NRF) grant funded by the Ministry of Science and ICT, Republic of Korea (Grant number: 2022 R1A4A1032030).
Author information
Authors and Affiliations
Corresponding author
Additional information
Hong-Gap Choi is a M.Sc. candidate of the Department of Mechanical Design and Robot Engineering, Seoul National University of Science and Technology (SeoulTech), Seoul, Korea. He received his B.S in Mechanical System Design Engineering from SeoulTech. His research interests include additive manufacturing and automatic design.
Keun Park received his B.S. and M.Sc. degrees in Precision Engineering and Mechatronics from KAIST, Korea, in 1992 and 1994, respectively. He received his Ph.D. degree in Mechanical Engineering from KAIST in 1999. He is currently a Professor of the Department of Mechanical System Design Engineering at SeoulTech, Korea. His research interests are finite element analysis and optimization, additive manufacturing, and design for additive manufacturing (DfAM).
Rights and permissions
About this article
Cite this article
Choi, HG., Park, K. Deformation behavior of re-entrant auxetic metamaterials considering shape transformation effects. J Mech Sci Technol 37, 6143–6151 (2023). https://doi.org/10.1007/s12206-023-2407-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-023-2407-0