Abstract
In this work, the influence of thickness and solidity of guide vane on the unsteady flow of a radial inflow turbine with variable nozzle has been numerically studied. Three vanes with the thickness changes from 0.3 to 0.1 and the solidity changes from 1.43 to 2.86, were chosen for this study. By investigating the unsteady flow field, it is found that the vane with low thickness and high solidity (vane B) can reduce shock by 75 % compared to the vane with high thickness and low solidity (base model); meanwhile, it can also mitigate the nozzle endwall leakage flow thus improves the flow uniformity of rotor inlet. As the intensity of shock and nozzle leakage flow were mitigated, the aerodynamic loading fluctuation of rotor blade can be weakened effectively, which will lead to improved rotor blades forced response. However, at small opening, vane B shows about 0.5 % lower efficiency than the base model; at large open condition, the efficiency degradation of vane B is up to 1.4 %. Therefore, there is a trade-off between the efficiency and forced response when choosing the nozzle vane solidity and thickness.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
]References
J. G. Hawley, F. J. Wallace, A. Cox, R. W. Horrocks and G. L. Bird, Variable geometry turbocharging for lower emissions and improved torque characteristics, Proc IMechE, Part D, J Automobile Engineering, 213 (1999) 145–159.
A. Hishikawa, Y. Okazaki and P. Busch, Developments of variable area radial turbine for small turbochargers, SAE Technical Paper, 880120 (1988).
G. O'Connor and M. Smith, Variable nozzle turbochargers for passenger car applications, SAE Technical Paper, 880121 (1988).
A. T. Simpson, S. W. T. Spence and J. K. Watterson, A comparison of the flow structures and losses within vaned and vaneless stators for radial turbines, Trans ASME, J. Turbomach, 131 (2009) 247–254.
H. Zhang, D. Lao, C. Yang and X. Wang, Internal flow characteristics of a variable mixed flow turbine with partially-rotating vane nozzle, Journal of Mechanical Science and Technology, 31 (10) (2017) 4977–4987.
H. Tamaki, S. Goto, M. Unno and A. Iwakami, The effect of clearance flow of variable area nozzles on radial turbine performance, ASME Turbo Expo 2008: Power for land, sea, and air, Berlin, Germany (2008) 1519–1529.
L. Hu, C. Yang, H. Sun, J. Zhang and M. Lai, Numerical analysis of nozzle clearance effect on turbine performance, Chin J. Mech. Eng., 24 (4) (2011) 618–625.
S. Spence, J. O'Neill and G. Cunningham, An investigation of the flow field through a variable geometry turbine stator with vane end-wall clearance, Proc. IMechE, Part A: J. Power and Energy, 220 (8) (2006) 899–910.
J. Walkingshaw, S. Spence, J. Ehrhard and D. Thornhill, A numerical study of the flow fields in a highly off-design variable geometry turbine, ASME Turbo Expo 2010: Power for land, sea, and air, Glasgow, UK (2010) 1951–1960.
X. W. Qiu, R. A. Mark and C. B. Nicholas, Meanline modeling of radial inflow turbine with variable area nozzle, ASME Turbo Expo 2009: Power for land, sea, and air, Orlando, Florida, USA (2009) 1185–1191.
H. Hayami, Y. I. Hyun, Y. Senoo and M. Yamaguchi, Effects of tip clearance of nozzle vanes on performance of radial turbine rotor, Trans. ASME, J. Turbomach., 112 (1990) 58–63.
L. Hu, H. Sun, J. Yi, E. Curtis and J. Zhang, Investigation of nozzle clearance effects on a radial turbine: Aerodynamic performance and forced response, SAE Technical Paper, 2013-01-0918 (2013).
Y. Liu, C. Yang, M. Qi, H. Zhang and B. Zhao, Shock, leakage flow and wake interactions in a radial turbine with variable guide vanes, ASME Turbo Expo 2014: Power for Land, Sea, and Air, Düsseldorf, Germany (2014).
A. Kulkarni and G. Larue, Vibratory response characterization of a radial turbine wheel for automotive turbocharger application, ASME Turbo Expo 2008: Power for land, sea, and air, Berlin, Germany (2008) 583–591.
A. T. Simpson, Numerical and experimental study of the performance effects of varying vaneless space and vane solidity in radial turbine stators, Journal of Turbomachinery, 135 (3) (2013) 420–431.
D. Yang, C. Yang, L. Hu, J. J. Yi, E. Curtis and M. S. Wooldridge, Numerical investigation of the split sliding guide vane for a variable nozzle turbine, Proc. IMechE, Part D, J. Automobile Engineering, 233 (8) (2018) 2074–2084.
M. Qi, X. Lei, Z. Wang and C. Ma, Investigation on the flow characteristics of a VNT turbine under pulsating flow conditions, Proc. IMechE, Part D, J. Automobile Engineering, 233 (2) 396–412.
B. Zhao, M. Qi, H. Sun and S. Xin, Variable nozzle turbocharger turbine performance improvement and shock wave alternation by distributing nozzle end-wall clearances, Proc. IMechE, Part D, J. Automobile Engineering, 233 (8) 1971–1981.
H. Chen, Turbine wheel design for Garrett advanced variable geometry turbines for commercial vehicle applications, Proc. 8th International Conference of Turbochargers and Turbocharging, London (2006) 317–327.
T. Kawakubo, Unsteady rotor-stator interaction of a radialinflow turbine with variable nozzle vanes, ASME Turbo Expo 2010: Power for Land, Sea, and Air, Glasgow, UK (2010) 2075–2084.
D. F. Yang, D. Z. Lao, C. Yang, L. Hu and H. Sun, Investigations on the generation and weakening of shock wave in a radial turbine with variable guide vanes, ASME Turbo Expo 2010: Power for Land, Sea, and Air, Seoul, South Korea (2016).
A. J. Feneley, A. Pesiridis and A. M. Andwari, Variable geometry turbocharger technologies for exhaust energy recovery and boosting - A review, Renewable and Sustainable Energy Reviews, 71 (2017) 959–975.
D. X. Zhu, Turbocharging and Turbochargers, Beijing: China Machine Press (1992).
Y. R. Ganesh, S. B. Siddharth and V. K. Keerthi, Numerical investigation: Effect of stator vanes on turbocharger turbine performance, Int. J. Rotating Mach., 2014 (2014).
J. Walkingshaw, S. Spence, J. Ehrhard and D. Thornhill, An experimental assessment of the effects of stator vane tip clearance location and back swept blading on an automotive variable geometry turbocharger, Trans. ASME, J. Turbomach., 136 (6) (2013).
X. C. Zhu, P. Y. Liu, J. G. Chen, X. Shen and Z. H. Du, Reduced- order modelling of wind turbine airfoil unsteady aerodynamic loading, Proc. IMechE, Part A: J. Power and Energy, 229 (1) (2015) 24–32.
G. Han, X. G. Lu, Y. F. Zhang, S. F. Zhao, C. W. Yang and J. Q. Zhu, Investigation of two pipe diffuser configurations for a compact centrifugal compressor, Proc. IMechE, Part G: J. Aerospace Engineering (2017) 1–13.
K. Chandler, A. White and J. Young, Non-equilibrium wetsteam calculations of unsteady low-pressure turbine flows, Proc IMechE, Part A: J. Power and Energy, 228 (2) (2014) 143–152.
D. F. Yang, D. Z. Lao, C. Yang, L. Hu and H. Sun, Design and numerical analysis of a forepart rotation vane for a variable nozzle turbine, International Journal of Turbo & Jet-Engines, 36 (3) 233–244.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (Grant/Award Number: ‘51576015’) and the Fundamental Research Funds for the Central Universities (Grant/Award Number: ‘N182303033’).
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Editor Yang Na
Dengfeng Yang obtained his Ph.D. degree from Power Machinery and Engineering from Beijing institute of Technology (BIT), and is currently working at Northeastern University at Qinhuangdao, China. His research interests include radial/mixed turbine design and the complex flow in turbomachinery.
Dazhong Lao is an Associate Professor in School of Aerospace Engineering, Beijing Institute of Technology (BIT). He received the Ph.D. degree from the Dalian University of Technology in 1995. His current research interest is turbomachinery aerodynamics.
Rights and permissions
About this article
Cite this article
Yang, D., Cao, L., Yang, C. et al. Investigations on the effect of guide vane thickness and solidity on shock and unsteady flow characteristic of VNT. J Mech Sci Technol 34, 2423–2433 (2020). https://doi.org/10.1007/s12206-020-0518-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-020-0518-4