Abstract
Cavitation is a challenging flow abnormality that leads to undesirable effects on the energy performance of the centrifugal pump and the reliable operation of the pump system. The onset and mechanism of a phenomenon that results in unsteady cavitation must be realised to ensure a reliable operation of pumps under the cavitation state. This study focuses on cavitation instability at normal flow rate, at which point the unsteady cavitation occurs as the available net positive suction head (NPSHa) falls below 5.61 m for the researched pump. An ameliorative algorithm–united algorithm for cavitation vibration analysis is proposed on the basis of short time Fourier transform (STFT) and Wigner–Ville distribution (WVD). The STFT–WVD method is then tested using vibration data measured from the centrifugal pump. The relationship between vibration and suction performance indicates that the inception and development of cavitation can be effectively detected by the distribution and intensity of the united algorithm at the testing points. Intermediate frequency components at approximately 6 kHz fluctuate initially with the development of cavitation. A time–frequency characteristic is found to be conducive to monitoring the cavitation performance of centrifugal pumps.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
X. J. Li, B. X. Yu, Y. C. Ji, J. X. Lu and S. Q. Yuan, Statistical characteristics of suction pressure signals for a centrifugal pump under cavitating conditions, Journal of Thermal Science, 26 (1) (2017) 47–53.
H. Li, B. Yu, B. Qing and S. R. Luo, Cavitation pulse extraction and centrifugal pump analysis, Journal of Mechanical Science and Technology, 31 (3) (2017) 1181–1188.
J. Cernetic, The use of noise and vibration signals for detecting cavitation in kinetic pumps, Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 223 (7) (2009) 1645–1655.
X. L. Fu, D. Y. Li, H. J. Wang, G. H. Zhang, Z. G. Li and X. Z. Wei, Analysis of transient flow in a pump-turbine during the load rejection process, Journal of Mechanical Science and Technology, 32 (5) (2018) 2069–2078.
W. Yang, R. F. Xiao, F. J. Wang and Y. L. Wu, Influence of splitter blades on the cavitation performance of a double suction centrifugal pump, Advances in Mechanical Engineering, 6 (2014) ID 963197.
M. Cudina, Detection of cavitation phenomenon in a centrifugal pump using audible sound, Mechanical Systems and Signal Processing, 17 (6) (2003) 1335–1347.
M. Cudina and J. Prezelj, Detection of cavitation in operation of kinetic pumps. Use of discrete frequency tone in audible spectra, Applied Acoustics, 70 (4) (2009) 540–546.
X. W. Luo, B. Ji and Y. Tsujimoto, A review of cavitation in hydraulic machinery, Journal of Hydrodynamics, 28 (3) (2016) 335–358.
X. M. Guo, L.H. Zhu, Z. C. Zhu, B. L. Cui and Y. Li, Numerical and experimental investigations on the cavitation characteristics of a high-speed centrifugal pump with a splitter-blade inducer, Journal of Mechanical Science and Technology, 29 (1) (2015) 259–267.
J. X. Lu, S. Q. Yuan, Y. Luo, J. P. Yuan, B. L. Zhou and H. Sun, Numerical and experimental investigation on the development of cavitation in a centrifugal pump, Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, 23 (4) (2014) 1989–1996.
J. X. Lu, S. Q. Yuan, P. Siva, J. P. Yuan, X. D. Ren and B. L. Zhou, The characteristics investigation under the unsteady cavitation condition in a centrifugal pump, Journal of Mechanical Science and Technology, 31 (3) (2017) 1213–1222.
M. Chudina, Noise as an indicator of cavitation in a centrifugal pump, Acoustical Physics, 49 (4) (2003) 463–474.
M. Ashokkumar, The characterization of acoustic cavitation bubbles -An overview, Ultrasonics Sonochemistry, 18 (4) (2011) 864–872.
H. S. Han, K. H. Lee and S. H. Park, Evaluation of the cavitation inception speed of the ship propeller using acceleration on its adjacent structure, Journal of Mechanical Science and Technology, 30 (12) (2016) 5423–5431.
S. Christopher and S. Kumaraswamy, Identification of critical net positive suction head from noise and vibration in a radial flow pump for different leading edge profiles of the vane, ASME Journal of Fluids Engineering, 135 (12) (2013) 121301.
A. T. Faisal, The non-intrusive detection of incipient cavitation in centrifugal pumps, Ph.D. Thesis, University of Huddersfield, Huddersfield (2011).
P. Harihara and A. Parlos, Sensorless detection of impeller cracks in motor driven centrifugal pumps. Proceedings of the 2008 International Mechanical Engineering Congress and Exposition, Boston, USA, October 31-November 6 (2008).
K. K. Mckee, G. L. Forbes, I. Mazhar, R. Entwistle, M. Hodkiewicz and I. Howard, A vibration cavitation sensitivity parameter based on spectral and statistical methods, Expert Systems with Applications, 42 (1) (2015) 67–78.
J. Cernetic and M. Cudina, Estimating uncertainty of measurements for cavitation detection in a centrifugal pump, Measurement, 44 (7) (2011) 1293–1299.
Y. Wen and M. P. Henry, Time frequency characteristics of the vibroacoustic signal of hydrodynamic cavitation, Journal of Vibration and Acoustics, 124 (4) (2002) 469–475.
Y. Feng, B. C Lu and D. F. Zhang, Multiscale singular value manifold for rotating machinery fault diagnosis, Journal of Mechanical Science and Technology, 31 (1) (2017) 99–109.
M. R. Hodkiewicz and M. P. Norton, The effect of change in flow rate on the vibration of double suction centrifugal pumps, Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, 216 (1) (2002) 47–58.
G. Cavazzini, G. Pavesi and G. Ardizzon, Pressure instabilities in a vanned centrifugal pump, Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 225 (7) (2011) 930–939.
G. Pavesi, G. Cavazzini and G. Ardizzon, Time-frequency characterization of the unsteady phenomena in a centrifugal pump, International Journal of Heat and Fluid Flow, 29 (5) (2008) 1527–1540.
E. Grist, Cavitation and the centrifugal pump: A guide for pump users, FL: CRC Press (1998).
X. J. Li, Z. C Zhu, Y. Li and X. P. Chen, Experimental and numerical investigations of head-flow curve instability of a single-stage centrifugal pump with volute casing, Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 230 (7) (2016) 633–647.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Sangyoup Lee
Xiaojun Li received his B.S. degree from Zhengzhou University in 2008, and his M.S. and Ph.D. degrees in Fluid Machinery and Engineering from Jiangsu University in 2010 and 2013, respectively. He is currently an Assistant Professor in Zhejiang Sci-Tech University, China.
Rights and permissions
About this article
Cite this article
Li, Y., Feng, G., Li, X. et al. An experimental study on the cavitation vibration characteristics of a centrifugal pump at normal flow rate. J Mech Sci Technol 32, 4711–4720 (2018). https://doi.org/10.1007/s12206-018-0918-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-018-0918-x