Abstract
Piezoelectric composites based on 0 – 3 cement have been extensively employed in structural health monitoring. Significantly, curing conditions considerably affect the forming strength of matrix materials. In order to obtain the best molding conditions of 0 – 3 cement-based piezoelectric composites, this paper studied the evolution of various parameters with time during the early molding process of 0 – 3 cement-based piezoelectric composites under different temperature and humidity conditions. The analysis indicated that the higher the temperature, which increases the forming speed of the sample, the lower the curing humidity, which decreases the current generated during the polarisation process of the sample, and longer the time required to attain the polarisation voltage. The test concluded that the curing condition of high temperature and high humidity was conducive to obtaining higher piezoelectric and dielectric properties of the sample and the piezoelectric strain constant and dielectric constant reached the maximum value at 80°C/100RH, which were 45.5 pC/N and 44.36 respectively.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Chai TT, Li ZW, Qin JM (2018) Application of piezoelectric ultrasonic sensor in the monitoring of concrete structure strain. Journal of Nanoelectronics and Optoelectronics 12(10):1093–1097, DOI: https://doi.org/10.1166/jno.2017.2233
Cheng X (2017) Cement-based piezoelectric composite and its application. Science Press, Beijing, China
Dong BQ, Li ZJ (2005) Cement-based piezoelectric ceramic smart composites. Composites Science and Technology 65(9):1363–1371, DOI: https://doi.org/10.1016/j.compscitech.2004.12.006
Dong BQ, Xing F, Li ZJ (2011) Cement-based piezoelectric ceramic composite and its sensor applications in civil engineering. Aci Materials Journal 108(5):543–549, DOI: https://doi.org/10.1016/j.researchgate.34957849
Gong HY, Li ZJ, Zhang YJ, Fan RH (2009) Piezoelectric and dielectric behavior of 0–3 cement-based composites mixed with carbon black. Journal of the European Ceramic Society 29(10):2019–2019, DOI: https://doi.org/10.1016/j.jeurceramsoc.2008.11.014
Gong HY, Zhang YJ, Quan J, Chen SW (2011) Preparation and properties of cement based piezoelectric composites modified by CNTs. Current Applied Physics 11(3):653–656, DOI: https://doi.org/10.1016/j.cap.2010.10.021
Hou Y, Wang LB, Wang DW, Yang HL, Guo M, Ye ZJ, Tong XL (2017) A preliminary study on the IoT-based pavement monitoring platform based on the piezoelectric-cantilever-beam powered sensor. Advances in Materials Science and Engineering 2017:4576026, DOI: https://doi.org/10.1155/2017/4576026
Huang SF, Li X, Liu FT, Chang J, Xu DY, Chen X (2009) Effect of carbon black on properties of 0–3 piezoelectric ceramic/cement composites. Current Applied Physics 9(6):1191–1194, DOI: https://doi.org/10.1016/j.cap.2009.01.011
Huang SF, Ye ZM, Hu YL, Chang J, Lu LC, Cheng X (2007) Effect of forming pressures on electric properties of piezoelectric ceramic/sulphoaluminate cement composites. Composites Science and Technology 67(1):135–139, DOI: https://doi.org/10.1016/j.compscitech.2006.03.035
Hunpratub S, Yamwong T, Srilomsak S, Maensiri S, Chindaprasirt P (2014) Effect of particle size on the dielectric and piezoelectric properties of 0-3BCTZO/cement composites. Ceramics International 40(1):1209–1213, DOI: https://doi.org/10.1016/j.ceramint.2013.05.118
Kocherla A, Subramaniam KVL (2020) Embedded electrical impedance-based PZT sensor for monitoring hydrating concrete: Development and evaluation. Smart Materials and Structures 29(5):055038, DOI: https://doi.org/10.1088/1361-665X/ab6955
Lezgy-Nazargah M, Saeidi-Aminabadi S, Yousefzadeh MA (2019) Design and fabrication of a new fiber-cement-piezoelectric composite sensor for measurement of inner stress in concrete structures. Archives of Civil and Mechanical Engineering 19(2):405–416, DOI: https://doi.org/10.1016/j.acme.2018.12.007
Lim YY, Kwong KZ, Liew WYH, Soh CK (2017) Practical issues related to the application of piezoelectric based wave propagation technique in monitoring of concrete curing. Construction and Building Materials 152:506–519, DOI: https://doi.org/10.1016/j.conbuildmat.2017.06.163
Lu YY, Li ZJ, Liao WI (2011) Damage monitoring of reinforced concrete frames under seismic loading using cement-based piezoelectric sensor. Materials and Structures 44(7):1273–1285, DOI: https://doi.org/10.1617/s11527-010-9699-0
Lu YY, Ma HY, Li ZJ (2015) Ultrasonic monitoring of the early-age hydration of mineral admixtures incorporated concrete using cement-based piezoelectric composite sensors. Journal of Intelligent Material Systems and Structures 26(3):280–291, DOI: https://doi.org/10.1177/1045389X14525488
Lu YY, Zhang JR, Li ZJ, Dong BQ (2013) Corrosion monitoring of reinforced concrete beam using embedded cement-based piezoelectric sensor. Magazine of Concrete Research 65(21):1265–1276, DOI: https://doi.org/10.1680/macr.13.00071
McLaren CT, Kopatz C, Smith NJ, Jain H (2019) Development of highly inhomogeneous temperature profile within electrically heated alkali silicate glasses. Scientific Reports 9:2805, DOI: https://doi.org/10.1038/s41598-019-39431-8
Pan HH, Huang MW (2020) Piezoelectric cement sensor-based electromechanical impedance technique for the strength monitoring of cement mortar. Construction and Building Materials 254:119307, DOI: https://doi.org/10.1016/j.conbuildmat.2020.119307
Pan WH, Sun XD, Wu LM, Yang KK, Tang N (2019) Damage detection of asphalt concrete using piezo-ultrasonic wave technology. Materials 12(3):443, DOI: https://doi.org/10.3390/ma12030443
Pan HH, Wang CK, Cheng YC (2017) Curing time and heating conditions for piezoelectric properties of cement-based composites containing PZT. Construction and Building Materials 129:140–147, DOI: https://doi.org/10.1016/j.conbuildmat.2016.10.107
Qin L, Lu YY, Li ZJ (2010) Embedded cement-based piezoelectric sensors for acoustic emission detection in concrete. Journal of Materials in Civil Engineering 22(12):1323–1327, DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000133
Ruan XQ (2017) Investigation on early hydration behavior of cement based on piezoelectric sensor. Emerging Materials Research 6(1):184–188, DOI: https://doi.org/10.1680/jemmr.16.00138
Wang PM, Li N, Xu LL (2017) Hydration evolution and compressive strength of calcium sulphoaluminate cement constantly cured over the temperature range of 0 to 80 degrees. Cement and Concrete Research 100:203–213, DOI: https://doi.org/10.1016/j.cemconres.2017.05.025
Wang CH, Wang S, Gao ZW, Song Z (2021) Effect evaluation of road piezoelectric micro-energy collection-storage system based on laboratory and on-site tests. Applied Energy 287:116581, DOI: https://doi.org/10.1016/j.apenergy.2021.116581
Yang S, Wu B, Liu XC, Li MZ, Wang HY, He CF (2021) Piezoelectric impact energy harvester based on the composite spherical particle chain for self-powered sensors. Sensors 21(9):3151, DOI: https://doi.org/10.3390/s21093151
Zhang YH, Li TB, Feng WK, Xiong Z, Zhang G (2020) Effects of temperature on performances and hydration process of sulphoaluminate cement-based dual liquid grouting material and its mechanisms. Journal of Thermal Analysis and Calorimetry 139(1):47–56, DOI: https://doi.org/10.1007/s10973-019-08426-y
Zhang YH, Liu ZY, Ding F, Zhang WQ (2018) Effect of piezoelectric ceramic particles size gradation on piezoelectric properties of 0–3 cement-based piezoelectric composites. Smart Materials and Structures 27(8):085029, DOI: https://doi.org/10.1088/1361-665X/aad0be
Zhang C, Panda GP, Yan QX, Zhang WL, Vipulanandan C, Song GB (2020) Monitoring early-age hydration and setting of portland cement paste by piezoelectric transducers via electromechanical impedance method. Construction and Building Materials 258:120348, DOI: https://doi.org/10.1016/j.conbuildmat.2020.120348
Zhang SQ, Zhang YM, Li ZJ (2018) Ultrasonic monitoring of setting and hardening of slag blended cement under different curing temperatures by using embedded piezoelectric transducers. Construction and Building Materials 159:553–560, DOI: https://doi.org/10.1016/j.conbuildmat.2017.10.124
Zhou HJ, Liu YQ, Lu YY, Dong P, Guo BW, Ding WJ, Xing F, Liu TJ, Dong BQ (2016) In-situ crack propagation monitoring in mortar embedded with cement-based piezoelectric ceramic sensors. Construction and Building Materials 126:361–368, DOI: https://doi.org/10.1016/j.conbuildmat.2016.09.050
Acknowledgments
This financial support is gratefully acknowledged, and the authors greatly appreciate the reviewer’s comments, which have helped to improve the quality of the paper. This work was supported by the National Natural Science Foundation of China (Grant No. 51978534).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rao, Y., Liu, Z., Zhu, X. et al. Early Performance Evolution Tracking and Monitoring for Cement-based Piezoelectric Composites under Multiple Curing Conditions. KSCE J Civ Eng 27, 2930–2939 (2023). https://doi.org/10.1007/s12205-023-0561-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-023-0561-7