Abstract
Corrugated steel plate shear walls (CoSPSWs) consist of corrugated steel wall plates and a steel boundary frame, which could be adopted as seismic-resistant systems for high-rise buildings. In this study, a performance-based seismic design (PBSD) method was proposed for CoSPSWs, in which an ideal yield mechanism and target drifts were selected as performance objectives to evaluate and control the inelastic behavior of the system. Two 10-story CoSPSW structures were then designed with the PBSD method and the traditional method respectively, and static pushover analyses as well as nonlinear dynamic time-history analyses were conducted on both structures. It turned out that the CoSPSW structure designed with the PBSD method presented the ideal yield mechanism, all inter-story drifts were well below the target drift of 2.5%, and the drifts distributed more smoothly under rare earthquakes. Structural and nonstructural fragility curves of both CoSPSW structures were obtained through probabilistic seismic demand analysis using Incremental Dynamic Analyses. The results showed that for the structural repair states of RS1 to RS5, the 25th percentile PGA values of the fragility curves of the CoSPSW structure designed with the PBSD method were 220%, 98%, 84%, 51 % and 13% higher than the CoSPSW structure designed with the traditional method, respectively. For the nonstructural damage states of Slight to Complete, the 25th percentile PGA values of the fragility curves of the CoSPSW structure designed with the PBSD method were 145%, 98%, 36%, and 7% higher than the CoSPSW structure designed with the traditional method, respectively. Therefore, CoSPSW structure designed with the PBSD method had lower seismic vulnerability as well as probability of nonstructural damage.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
AISC (2016) Seismic provisions for structural steel buildings. ANSI/AISC 341-16, American Institute of Steel Construction, Chicago, IL, USA
Akkar S, Sucuoğlu H, Yakut A (2005) Displacement-based fragility functions for low- and mid-rise ordinary concrete buildings. Earthquake Spectra 21(4):901–927, DOI: https://doi.org/10.1193/1.2084232
ASCE (2017) Seismic evaluation and retrofit of existing buildings. ASCE/SEI 41-17, American Society of Civil Engineers, Reston, VA, USA
Bahrebar M, Kabir M, Zirakian M, Hajsadeghi M, Lim J (2016) Structural performance assessment of trapezoidally-corrugated and centrally-perforated steel plate shear walls. Journal of Constructional Steel Research 122:584–594, DOI: https://doi.org/10.1016/j.jcsr.2016.03.030
Bahrebar M, Lim J, Clifton G, Zirakian T, Shahmohammadi A, Hajsadeghi M (2020) Perforated steel plate shear walls with curved corrugated webs under cyclic loading. Structures 24:600–609, DOI: https://doi.org/10.1016/j.istruc.2020.01.047
Baker JW, Cornell CA (2006) Vector-valued ground motion intensity measures for probabilistic seismic demand analysis. PEER Report 2006/08, University of California, Berkeley, CA, USA
Baldvins NM, Berman JW, Lowes LN, Janes TM, Low NA (2012) Fragility functions for steel plate shear walls. Earthquake Spectra 28(2):405–426, DOI: https://doi.org/10.1193/1.4000003
Bayat MR (2010) Performance-based plastic design of earthquake resistant steel structures: Concentrically Braced Frames, Tall Moment Frames, Plate Shear Wall Frames. PhD Thesis, University of Texas at Arlington, Arlington, VA, USA
Berman JW (2011) Seismic behavior of code designed steel plate shear walls. Engineering Structures 33(1):230–244, DOI: https://doi.org/10.1016/j.engstruct.2010.10.015
Berman JW, Bruneau M (2003) Plastic analysis and design of steel plate shear walls. ASCE-Journal of Structural Engineering 129(11):1448–1456, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2003)129:11(1448)
Berman JW, Bruneau M (2005) Experimental investigation of light-gauge steel plate shear walls. Journal of Structural Engineering 131:259–267, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2005)131:2(259)
Bertero VV, Anderson JC, Krawinkler H, Miranda E (1991) Design guidelines for ductility and drift limits. Report No. UCB/EERC-91/15, University of California, Earthquake Engineering Center, Berkeley, CA, USA
Bhowmick AK, Grondin GY, Driver RG (2011) Estimating fundamental periods of steel plate shear walls. Engineering Structures 33(6):1883–1893, DOI: https://doi.org/10.1016/j.engstruct.2011.02.010
Cao Q, Huang J (2018) Experimental study and numerical simulation of corrugated steel plate shear walls subjected to cyclic loads. Thin-Walled Structures 127:306–317, DOI: https://doi.org/10.1016/j.tws.2018.01.042
Chao SH, Goel SC, Lee SS (2007) A seismic design lateral force distribution based on inelastic state of structures. Earthquake Spectra 23(3):547–569, DOI: https://doi.org/10.1193/1.2753549
CSA (2014) Design of steel structures. CAN/CSA-S16-2014, Canadian Standard Association, Mississauga, ON, Canada
Ding Y, Deng E, Zong L, Dai X, Lou N, Chen Y (2017) Cyclic tests on corrugated steel plate shear walls with openings in modularized-constructions. Journal of Constructional Steel Research 138:675–91, DOI: https://doi.org/10.1016/j.jcsr.2017.08.019
Dou C, Jiang ZQ, Pi YL, Guo YL (2016) Elastic shear buckling of sinusoidally corrugated steel plate shear wall. Engineering Structures 121:136–146, DOI: https://doi.org/10.1016/j.engstruct.2016.04.047
Edalati SA, Yadollahi Y, Pakar I, Emadi A, Bayat M (2014) Numerical study on the performance of corrugated steel shear walls. Wind and Structures 19(4):405–420, DOI: https://doi.org/10.12989/was.2014.19.4.405
Emami F, Mofid M (2014) On the hysteretic behavior of trapezoidally corrugated steel shear walls. The Structural Design of Tall and Special Buildings 23(2): 94–104, DOI: https://doi.org/10.1002/tal.1025
Emami F, Mofid M, Vafai A (2013) Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls. Engineering Structures 48:750–762, DOI: https://doi.org/10.1016/j.engstruct.2012.11.028
Englekirk R (1994) Steel structures: Controlling behavior through design. John Wiley & Sons Inc, Hoboken, NJ, USA
Esteghamati M, Farzampour A (2020a) Probabilistic seismic assessment of a mid-rise eccentrically braced steel frame equipped with butterfly-shaped dampers. Proceedings of 17th world conference on earthquake engineering, September 13–18, Sandi, Japan
Esteghamati M, Farzampour A (2020b) Probabilistic seismic performance and loss evaluation of a multi-story steel building equipped with butterfly-shaped fuses. Journal of Constructional Steel Research 172:106187, DOI: https://doi.org/10.1016/j.jcsr.2020.106187
Esteghamati M, Lee J, Musetich M, Flint M (2020) INSSEPT: An open-source relational database of seismic performance estimation to aid with early design of buildings. Earthquake Spectra 36(4):2177–2197, DOI: https://doi.org/10.1177/8755293020919857
Fang J, Bao W, Ren F, Guan T, Xue G, Jiang J (2020) Experimental study of hysteretic behavior of semi-rigid frame with a corrugated plate. Journal of Constructional Steel Research 174:106289, DOI: https://doi.org/10.1016/j.jcsr.2020.106289
Farzampour A, Laman JA (2015) Behavior prediction of corrugated steel plate shear walls with openings. Journal of Constructional Steel Research 114:258–268, DOI: https://doi.org/10.1016/j.jcsr.2015.07.018
Farzampour A, Mansouri I, Hu JW (2018a) Seismic behavior investigation of the corrugated steel shear walls considering variations of corrugation geometrical characteristics. International Journal of Steel Structures 18(4):1297–1305, DOI: https://doi.org/10.1007/s13296-018-0121-z
Farzampour A, Mansouri I, Lee CH, Sim HB, Hu JW (2018b) Analysis and design recommendations for corrugated steel plate shear walls with a reduced beam section. Thin-Walled Structures 132(11):658–666, DOI: https://doi.org/10.1016/j.tws.2018.09.026
Farzampour A, Yekrangnia M (2014) On the behavior of corrugated steel shear walls with and without openings. Proceedings of second european conference on earthquake engineering and seismology, August 25–29, Istanbul, Turkey
GB50011-2010 (2010) Code for seismic design of buildings. GB50011-2010, China Architecture and Building Press, Beijing, China (in Chinese)
GB50017-2017 (2017) Standard for design of steel structure. GB50017-2017, China Architecture and Building Press, Beijing, China (in Chinese)
Hamburger R, Rojahn C, Moehle J, Bachman R, Comartin C, Whittaker A (2004) The ATC-58 project: Development of next-generation performance-based earthquake engineering design criteria for buildings. Proceedings of 13 world conference on earthquake engineering, Vancouver, BC, Canada
HAZUS-MH MR5 (2010) Earthquake loss estimation methodology. Technical and User’s Manual. Department of Homeland Security, Federal Emergency Management Agency, Mitigation Division, Washington DC, USA
Hosseinzadeh L, Emami F, Mofid M (2017) Experimental investigation on the behavior of corrugated steel shear wall subjected to the different angle of trapezoidal plate. Structural Design of Tall & Special Buildings 2017(2):e1390, DOI: https://doi.org/10.1002/tal.1390
Huang YL, Lu XZ, Ye LP, Shi W (2011) A pushover analysis algorithm based on multiple point constraints. Engineering Mechanics 28(2): 18–23 (in Chinese)
JGJ99-2015 (2016) Technical specification for steel structure of tall building. JGJ99-2015, China Architecture and Building Press, Beijing, China (in Chinese)
Jiang WW, Jin HJ, Sun FF, Li GQ, Qian P, Tong J, Yan CZ (2019) Research on simplified analysis models of non-buckling corrugated steel shear walls. Progress in Steel Building Structures 21(1):61–71
Kalali H, Hajsadeghi M, Zirakian T, Alaee FJ (2015) Hysteretic performance of SPSWs with trapezoidally horizontal corrugated web-plates. Steel and Composite Structures 19(2):277–292, DOI: https://doi.org/10.12989/scs.2015.19.2.277
Kharmale SB, Ghosh S (2013) Performance-based plastic design of steel plate shear walls. Journal of Constructional Steel Research 90(8):85–97, DOI: https://doi.org/10.1016/j.jcsr.2013.07.029
Lee SS, Goel SC, Chao SH (2004) Performance-based seismic design of steel moment frames using target drift and yield mechanism. Proceedings of 13 world conference on earthquake engineering, Vancouver, BC, Canada
Leelataviwat S (1998) Drift and yield mechanism based seismic design and upgrading of steel moment frames. PhD Thesis, University of Michigan, Ann Arbor, MI, USA
Liu S, Warn GP, Berman JW (2013) Estimating natural periods of steel plate shear wall frames. Journal of Structural Engineering 139(1): 155–161, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000610
Masoud HA, Mahna S (2018) Seismic behavior of steel plate shear wall with reduced boundary beam section. Thin-Walled Structures 116: 169–179, DOI: https://doi.org/10.1016/j.tws.2017.03.014
Mitchell D, Tremblay R, Karacabeyli E, Paultre P, Saatcioglu M, Anderson DL (2003) Seismic force modification factors for the proposed 2005 edition of national building code of Canada. Canadian Journal of Civil Engineering 30(2):308–327, DOI: https://doi.org/10.1139/l02-111
Newmark NM, Hall WJ (1982) Earthquake spectra and design. Earthquake Engineering Research Institute, Oackland, CA, USA
Paslar N, Farzampour A, Hatami F (2020a) Infill plate interconnection effects on the structural behavior of steel plate shear walls. Thin-Walled Structures 149:106621, DOI: https://doi.org/10.1016/j.tws.2020.106621
Paslar N, Farzampour A, Hatami F (2020b) Investigation of the infill plate boundary condition effects on the overall performance of the steel plate shear walls with circular openings. Structures 27:824–836, DOI: https://doi.org/10.1016/j.istruc.2020.06.031
Qiu J, Zhao QH, Yu C, Li ZX (2018) Experimental studies on cyclic behavior of corrugated steel plate shear walls. Journal of Structural Engineering 144(11):04018200, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002165
Qu B, Bruneau M (2010) Capacity design of intermediate horizontal boundary elements of steel plate shear walls. Journal of Structural Engineering 136(6):665–675, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000167
Sabelli R, Bruneau M (2007) AISC steel design guide 20: Steel plate shear walls. AISC, Chicago, IL, USA
SEAOC (1995) Vision 2000: Performance-based seismic engineering of buildings. Structural Engineers Association of California, Sacramento, CA, USA
Shariati M, Faegh SS, Mehrabi P, Bahavarnia S, Zandi Y, Masoom D, Toghroli A, Trung N, Salih M (2019) Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings. Steel and Composite Structures 33(4):569–581, DOI: https://doi.org/10.12989/scs.2019.33.4.569
SIMULIA (2014) ABAQUS/standard user’s manual, version 6.14. Dassault Systèmes Simulia Corp., Providence, RI, USA
Soonsik L (2002) Performance-based design of steel moment frames using target drift and yield mechanism. PhD Thesis, University of Michigan, Ann Arbor, MI, USA
Stojadinovic B, Tipping S (2008) Structural testing of corrugated sheet steel shear walls. Proceedings of 19th international specialty conference on cold-formed steel structures. Missouri University of Science and Technology, Rolla, MO, USA
Sun G, Gu Q, He R, Fang Y (2013) Distribution of horizontal seismic shear based on inelastic state of steel plate shear walls. Engineering Mechanics 30(7):113–121, DOI: https://doi.org/10.6052/j.issn.1000-4750.2012.03.0139 (in Chinese)
Topkaya C, Kurban CO (2009) Natural periods of steel plate shear wall systems. Journal of Constructional Steel Research 65(3):542–551, DOI: https://doi.org/10.1016/j.jcsr.2008.03.006
Tong JZ, Guo YL (2018) Shear resistance of stiffened steel corrugated shear walls. Thin-Walled Structures 127:76–89
Sullivan TJ (2013) Direct displacement-based seismic design of steel eccentrically braced frame structures. Bulletin of Earthquake Engineering 11:2197–2231, DOI: https://doi.org/10.1007/s10518-013-9486-8
Yakut A, Yilmaz H (2008) Correlation of deformation demands with ground motion intensity. Journal of Structural Engineering 134(12): 1818–1828, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2008)134:12(1818)
Yi J, Gil H, Youm K, Lee H (2008) Interactive shear buckling behavior of trapezoidally corrugated steel webs. Engineering Structures 30(6): 1659–1666, DOI: https://doi.org/10.1016/j.engstruct.2007.11.009
Yu Y, Chen Z (2018) Rigidity of corrugated plate sidewalls and its effect on the modular structural design. Engineering Structures 175:191–200, DOI: https://doi.org/10.1016/j.engstruct.2018.08.039
Zhang J, Zirakian T (2015) Probabilistic assessment of structures with SPSW systems and LYP steel infill plates using fragility function method. Engineering Structures 85(2):195–205, DOI: https://doi.org/10.1016/j.engstruct.2014.12.027
Zhao Y (2018) Lateral behavior and design method of corrugated steel plate shear walls. MSc Thesis, Tianjin University, Tianjin, China (in Chinese)
Zhao Q, Li Y (2016) Buckling and instabilities of sinusoidally corrugated steel plate shear walls. Proceedings of 7th international conference on coupled instabilities in metal structures, November 7–8, 2016, Baltimore, MD, USA
Zhao Q, Qiu J, Zhao Y, Yu C (2020) Estimating fundamental period of corrugated steel plate shear walls. KSCE Journal of Civil Engineering 24(10):3023–3033, DOI: https://doi.org/10.1007/s12205-020-2305-2
Zhao Q, Sun JH, Li Y, Li ZX (2017) Cyclic analyses of corrugated steel plate shear walls. Structural Design of Tall & Special Buildings 26(16):e1351, DOI: https://doi.org/10.1002/tal.1351
Acknowledgments
The authors gratefully acknowledge the financial supports by the National Natural Science Foundation of China under Grant numbers No. 51878447, No. 51678406, and No. 51378340.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhao, Q., Qiu, J., Zhao, Y. et al. Performance-Based Seismic Design of Corrugated Steel Plate Shear Walls. KSCE J Civ Eng 26, 3486–3503 (2022). https://doi.org/10.1007/s12205-022-1188-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-022-1188-9