Abstract
The performance of earth pressure balanced tunnel boring machines (EPB-TBM) is dependent of a variety of parameters. Moreover, these parameters interact in a rather challenging way, making it difficult to adequately model their behaviour. Artificial neural networks have the aptitude to model complex problems and have been used in a variety of construction engineering problems. They can learn from existing data and then be used to predict the results, which makes them adequate for modelling problems where large amount of data is generated. In this work, a multilayer feedforward artificial neural network has been used to predict the torque at the cutter head of an EPB-TBM. A time series neural network has been used, where torque was predicted as a function of the measured torque and the volume of the injected foam on previous time steps. Results indicate that feedforward artificial neural network can be used to predict the torque at the cutter head in a EPB-TBM
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Alvarez Grima, M., Bruines, P. A., and Verhoef, P. N. W. (2000). “Modeling tunnel boring machine performance by neuro-fuzzy methods.” Tunn. Undergr. Sp. Technol., Vol. 15, No. 3, pp. 259–269, DOI: https://doi.org/10.1016/S0886-7798(00)00055-9.
Benardos, A. G. and Kaliampakos, D. C. (2004). “Modelling TBM performance with artificial neural networks.” Tunn. Undergr. Sp. Technol., Vol. 19, No. 6, pp. 597–605, DOI: https://doi.org/10.1016/j.tust.2004.02.128.
Bezuijen, A. (2006). “The influence of soil permeability on the properties of a foam mixture in a TBM.” Tunnelling. A Decade of Progress, Bezuijen, A., van Lottum, H. (Eds.), GeoDelft 1995-2005. Taylor & Francis, pp. 35–41, DOI: https://doi.org/10.1201/9781439834268.ch6.
Gao, W. (2016). “Inverse back analysis based on evolutionary neural networks for underground engineering.” Neural Process. Lett., Vol. 44, No. 1, pp. 81–101, DOI: https://doi.org/10.1007/s11063-016-9498-x.
Godinez, R., Yu, H., Mooney, M., and Contractors, J. D. (2015). “Earth pressure balance machine cutterhead torque modeling: Learning from machine data.” Rapid Excavation and Tunneling Conference 2015. New Orleans, USA, pp. 1261-1271.
Goh, A. T. C. (2001). “Neural Network Applications in Geotechnical Engineering.” Sci. Iran., Vol. 8, No 1, 1–9, http://scientiairanica.sharif.edu/article_2776_56fe4c1f97542eaf9259c88474ec7a6b.pdf.
Heaton, J. (2015). “Encog: Library of interchangeable machine learning models for java and C#.” J. Mach. Learn. Res., Vol. 16, pp. 1243–1247.
Kim, C. Y., Bae, G. J., Hong, S. W., Park, C. H., Moon, H. K., and Shin, H. S. (2001). “Neural network based prediction of ground surface settlements due to tunnelling.” Comput. Geotech., Vol. 28, No. 6, pp. 517–547, DOI: https://doi.org/10.1016/S0266-352X(01)00011-8.
Mori, L. (2016). Advancing understanding of the relationship between soil conditioning and earth pressure balance tunnel boring machine chamber and shield annulus behavior, PhD Thesis, Colorado School of Mines, Colorado, USA, DOI: 11124/170474.
Neaupane, K. M. and Adhikari, N. R. (2006). “Prediction of tunnelinginduced ground movement with the multi-layer perceptron.” Tunn. Undergr. Sp. Technol., Vol. 21, No. 2, pp. 151–159, DOI: https://doi.org/10.1016/j.tust.2005.07.001.
Reilly, B. J. (1999). “EPBMs for the north east line project.” Tunn. Undergr. Sp. Technol., Vol. 14, No. 4, pp. 491–508, DOI: https://doi.org/10.1016/S0886-7798(00)00011-0.
Shahin, M. A., Jaksa, M. B., and Maier, H. R. (2001). “Artificial neural network applications in geotechnical engineering.” Aust. Geomech. J., Vol. 36, No. 1, pp. 49–62.
Shahin, M., Jaksa, M., and Maier, H. (2008). “State of the art of artificial neural networks in geotechnical engineering.” Electron. J. Geotech. Eng., Bouquet 8, pp. 1–26, http://www.ejge.com/Bouquet08/Shahin/Shahin_ppr.pdf.
Shi, H., Yang, H., Gong, G., and Wang, L. (2011). “Determination of the cutterhead torque for EPB shield tunneling machine.” Autom. Constr., Vol. 20, No. 8, pp. 1087–1095, DOI: https://doi.org/10.1016/j.autcon.2011.04.010.
Sulewska, M. J. (2011). “Applying artificial neural networks for analysis of geotechnical problems.” Comput. Assist. Mech. Eng. Sci., Vol. 18, No. 4, pp. 231–241, http://cames.ippt.gov.pl/index.php/cames/article/view/101.
Suwansawat, S. and Einstein, H. H. (2006). “Artificial neural networks for predicting the maximum surface settlement caused by EPB shield tunneling.” Tunn. Undergr. Sp. Technol., Vol. 21, No. 8, pp. 133–150, DOI: https://doi.org/10.1016/j.tust.2005.06.007.
Wang, L., Gong, G., Shi, H., and Yang, H. (2012). “A new calculation model of cutterhead torque and investigation of its influencing factors.” Sci. China Technol. Sci., Vol. 55, No. 6, pp. 1581–1588, DOI: https://doi.org/10.1007/s11431-012-4749-1.
Xiangjun, C. and Zhanfeng, G. (2007). “Applications of ANNs in geotechnical engineering.” 8 th International Conference on Electronic Measurement and Instruments. ICEMI ’07. IEEE, Xi’an, China, DOI: https://doi.org/10.1109/ICEMI.2007.4351003.
Zhou, C., Ding, L. Y., and He, R. (2013). “PSO-based Elman neural network model for predictive control of air chamber pressure in slurry shield tunneling under Yangtze River.” Autom. Constr., Vol. 36, pp. 208–217, DOI: https://doi.org/10.1016/j.autcon.2013.03.001.
Ackowledgements
Author wishes to acknowledge FCT/MEC for the financial support (FCT/UID/ECI/04450/2013 and SFRH/BSAB/114546/2016).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cachim, P., Bezuijen, A. Modelling the Torque with Artificial Neural Networks on a Tunnel Boring Machine. KSCE J Civ Eng 23, 4529–4537 (2019). https://doi.org/10.1007/s12205-019-0302-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-019-0302-0