Abstract
In many civil engineering constructions, soft clayey soils are often stabilized with Ordinary Portland Cement (OPC) whose production process is energy intensive and emits a large quantity of CO2. In this paper, an OPC-based clay stabilizer (CSCN) which contains some eco-friendly materials is studied to compare with OPC by investigating the mechanical properties of the stabilized clays. Microstructural and mineralogical studies using Scanning Electron Microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) are performed to reveal the mechanisms controlling the development of the strength and modulus. The test results indicate that the compressive strength and secant modulus increase with increasing the content of CSCN and curing age. To achieve the equivalent improvement of the strength and modulus, much less CSCN is needed relative to OPC, which illustrates that CSCN can be a more effective and relatively eco-friendly clay stabilizer. The analysis on pH values and moisture consumption indicates that the hydration and pozzolanic reactions in CSCN-stabilized clays may be quicker than those in OPC-stabilized clays. The microstructural analyses confirm the formation of C-S-H gels in stabilized clays and the types of C-S-H gels are dependent upon the Ca/Si molar ratio according to EDX results. The types and amounts of new minerals in stabilized clays are the possible mechanisms controlling the enhancement of mechanical properties.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Consoli, N. C., Cruz, R. C., and Floss, M. F. (2010). “Variables controlling strength of artificially cemented sand: Influence of curing time.” Journal of Materials in Civil Engineering, Vol. 23, No. 5, pp. 692–696, DOI: 10.1061/(ASCE)MT.1943-5533.0000205.
Gao, G. R. (1996). “The distribution and geotechnical properties of loess soils, lateritic soils and clayey soils in China.” Engineering Geology, Vol. 42, No. 1, pp. 95–104, DOI: 10.1016/0013-7952(95)00056-9.
Gleize, P. J. P., Müller, A., and Roman, H. R. (2003). “Microstructural investigation of a silica fume–cement–lime mortar.” Cement and Concrete Composites, Vol. 25, No. 2, pp. 171–175, DOI: 10.1016/S0958-9465(02)00006-9.
Horpibulsuk, S., Bergado, D. T., and Lorenzo, G. A. (2004). “Compressibility of cement-admixed clays at high water content.” Geotechnique, Vol. 54, No. 2, pp. 151–154, DOI: 10.1680/geot.2004.54.2.151.
Horpibulsuk, S., Rachan, R., and Raksachon, Y. (2009). “Role of fly ash onstrength and microstructure development in blended cement stabilized silty clay.” Soils and Foundations, Vol. 49, No. 1, pp. 85–98, DOI: 10.3208/sandf.49.85.
Horpibulsuk, S., Rachan, R., and Suddeepong, A. (2011). “Assessment of strength development in blended cement admixed Bangkok clay.” Construction and Building Materials, Vol. 25, No. 4, pp. 1521–31, DOI: 10.1016/j.conbuildmat.2010.08.006.
Hunter, D. (1988). “Lime-induced heave in sulfate-bearing clay soils.” Journal of geotechnical engineering, Vol. 114, No. 2, pp. 150–167, pp. 150-167, DOI: 10.1061/(ASCE)0733-9410(1988) 114:2(150).
Jie, Y. X., Li, G. X., Tang, F., Jin, Y., and Hua, J. X. (2012). “Soil Stabilization in the Fill Project of the Olympic Rowing-Canoeing Park in Beijing.” Journal of Materials in Civil Engineering, Vol. 25, No. 4, pp. 462–471, DOI: 10.1061/(ASCE)MT.1943-5533.0000589.
Kaniraj, S. R. and Havanagi, V. G. (1999). “Compressive strength of cement stabilized fly ash-soil mixtures.” Cement and Concrete Research, Vol. 29, No. 5, pp. 673–677, DOI: 10.1016/S0008-8846(99)00018-6.
Kasama, K., Whittle, A. J., and Zen, K. (2012). “Effect of spatial variability on the bearing capacity of cement-treated ground.” Soils and Foundations, Vol. 52, No. 4, pp. 600–619, DOI: 10.1016/j.sandf.2012. 07.003.
Kazemian, S., Prasad, A., Huat, B. B., Bazaz, J. B., Abdul Aziz, F. N., and Mohammad Ali, T. A. (2011a). “Influence of cement–sodium silicate grout admixed with calcium chloride and kaolinite on sapric peat.” Journal of Civil Engineering and Management, Vol. 17, No. 3, pp. 309–318, DOI: 10.3846/13923730.2011.589209.
Kazemian, S., Prasad, A., Huat, B. B. K., Bazaz, J. B., Mohammed, T. A., and Aziz, F. A. (2011b). “Effect of aggressive pH media on peat treated by cement and sodium silicate grout.” Journal of Central South University of Technology, Vol. 18, No. 3, pp. 840–847, DOI: 10.1007/s11771-011-0771-x.
Ma, C., Chen, L. Z., and Chen, B. (2014). “Analysis of strength development in soft clay stabilized with cement-based stabilizer.” Construction and Building Materials, Vol. 71, pp. 354–362, DOI: 10.1016/ j.conbuildmat.2014.08.087.
Ma, C., Qin, Z. H., Zhuang, Y. C., Chen, L. Z., and Chen, B. (2015). “Influence of sodium silicate and promoters on unconfined compressive strength of Portland cement-stabilized clay.” Soils and Foundations, Vol. 55, No. 5, pp. 1222–1232, DOI: 10.1016/j.sandf.2015.09.021.
Meyer, C. (2009). “The greening of the concrete industry.” Cement and Concrete Composites, Vol. 31, No. 8, pp. 601–605, DOI: 10.1016/j.cemconcomp.2008.12.010.
Naeini, S. A., Naderinia, B., and Izadi, E. (2012). “Unconfined compressive strength of clayey soils stabilized with waterborne polymer.” KSCE Journal of Civil Engineering, Vol. 16, No. 6, pp. 943–949, DOI: 10.1007/s12205-012-1388-9.
Niazi, Y. and Jalili, M. (2009). “Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion.” Construction and Building Materials, Vol. 23, No. 3, pp. 1338–1343, DOI: 10.1016/j.conbuildmat.2008.07.020.
Papadakis, V. G. and Tsimas, S. (2002). “Supplementary cementing materials in concrete: Part I: efficiency and design.” Cement and Concrete Research, Vol. 32, No. 10, pp. 1525–1532, DOI: 10.1016/S0008-8846(02)00827-x.
Shen, W., Zhou, M., and Zhao, Q. (2007). “Study on lime-fly ashphosphogypsum binder.” Construction and Building Materials, Vol. 21, No. 7, pp. 1480–1485, DOI: 10.1016/j.conbuildmat.2006. 07.010.
Sukmak, P., Horpibulsuk, S., Shen, S. L., Chindaprasirt, P., and Suksiripattanapong, C. (2013). “Factors influencing strength development in clay-fly ash geopolymer.” Construction and Building Materials, Vol. 47, 1125–1136, DOI: 10.1016/j.conbuildmat.2013. 05.104.
Thyagaraj, T., Rao, S. M., Sai Suresh, P., and Salini, U. (2012). “Laboratory studies on stabilization of an expansive soil by lime precipitation technique.” Journal of Materials in Civil Engineering, Vol. 24, No. 8, pp. 1067–1075, DOI: 10.1061/(ASCE)MT.1943-5533.0000483.
Vichan, S., Rachan, R., and Horpibulsuk, S. (2013). “Strength and microstructure development in Bangkok clay stabilized with calcium carbide residue and biomass ash.” Science Asia, Vol. 39, pp. 186–193, DOI: 10.2306/scienceasia1513-1874.2013.39.186.
Yee, E., Lee, J., Kim, Y., Kim, K., and Chun, B. (2014). “Stabilization mechanism for sands treated with organic acids.” KSCE Journal of Civil Engineering, Vol. 18, No. 4, pp. 1001–1008, DOI: 10.1007/s12205-014-0498-y.
Zaimoglu, A. S. (2015). “Optimization of unconfined compressive strength of fine-grained soils modified with polypropylene fibers and additive materials.” KSCE Journal of Civil Engineering, Vol. 19, No. 3, pp. 578–582, DOI: 10.1007/s12205-015-1425-6.
Zhang, M., Guo, H., El-Korchi, T., Zhang, G., and Tao, M. (2013). “Experimental feasibility study of geopolymer as the next-generation soil stabilizer.” Construction and Building Materials, Vol. 47, pp. 1468–1478, DOI: 10.1016/j.conbuildmat.2013.06.017.
Zhang, Z. and Tao, M. (2008). “Durability of cement stabilized low plasticity soils.” Journal of geotechnical and geoenvironmental engineering, Vol. 134, No. 2, pp. 203–213, DOI: 10.1061/(ASCE) 1090-0241(2008)134:2(203).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ma, C., Chen, B. & Chen, L. Experimental feasibility research on a high-efficiency cement-based clay stabilizer. KSCE J Civ Eng 22, 62–72 (2018). https://doi.org/10.1007/s12205-017-0782-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-017-0782-8