Abstract
The purpose of this work is to investigate the seismic performance of a four-story two-bay high-performance concrete (HPC) frame. Low reversed cyclic loading was conducted on a 1/5-scaled HPC frame. Seismic performance of the frame specimen was evaluated in terms of failure pattern, failure mechanism, deformation restoring capacity, displacement ductility and energy dissipation capacity. Test results showed that the specimen failed in the designed failure mechanism, and behaved in a ductile manner and larger energy dissipation capacity. The roof lateral displacement ductility coefficient was 5.69, and the 1st, 2nd, 3rd and 4th inter-story lateral displacement ductility coefficients were 7.95, 7.32, 5.06 and 4.69, respectively. An alternative design principle of frame structures is proposed in this paper to ensure that the beam sidesway mechanism occurs. Parametric analysis of ten frames with different developmental sequence of plastic hinges is conducted by a Finite Element Analysis (FEA) software framework OpenSees. The analytical results showed that the ductility supply of the frame designed according to the proposed design principle was maximized.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Alameddine, F. and Ehsani, M. R. (1991). “High-strength RC connections subjected to inelastic cyclic loading.” Journal of Structural Engineering, Vol. 117, No. 3, pp. 829–850, DOI: 10.1061/(ASCE)0733-9445 (1991)117:3(829).
Anderson, J. C., Duan, X., Yin, Z., and Mansouri, B. (1997). “Cyclic behaviour of high strength concrete joints.” Structures Congress-Proceedings, Building to Last, Vol. 1.
Ashitiani, M. S., Dhakal, R. P., and Scott, A. N. (2014). “Seismic performance of high-strength self-compacting concrete in reinforced concrete beam-column joints.” Journal of Structural Engineering, Vol. 140, No. 5, pp. 1–12, DOI: 10.1061/(ASCE) ST.1943-541X. 0000973.
Awati, M. and Khadiranaikar, R. B. (2012). “Behavior of concentrically loaded high performance concrete tied columns.” Engineering Structures, Vol. 37, No. 4, pp. 76–87, DOI: 10.1016/j.engstruct. 2011.12.040.
Breitenbücher, R. (1998). “Developments and applications of highperformance concrete.” Materials & Structures, Vol. 31, No. 3, pp. 209–215, DOI: 10.1007/BF02480402.
Biolzi, L., Cattaneo, S., and Mola, F. (2014). “Bending-shear response of self-consolidating and high-performance reinforced concrete beams.” Engineering Structures, Vol. 59, No. 2, pp. 399–410, DOI: 10.1016/j.engstruct.2013.10.043.
Cheng, B. (2003). “Study on seismic performance and performancebased design of HPC frames. Master’s thesis.” Department of Building Engineering. Tongji Univ. Shanghai, China. (Supervised by W. C. Xue)
Fang, I. K., Wang, C. S., and Hong, K. L. (1994). “Cyclic behaviour of high-strength concrete short beams with low amout of flexural reinforcement.” ACI Structural Journal, Vol. 91, No. 1, pp. 10–18, DOI: 10.14359/4477.
International Code Council Inc. (2006). “International Building Code IBC 2006.” Country Club Hill, IL.
Lin, C. H. and Lee, F. S. (2001). “Ductility of high-performance concrete beams with high-strength lateral reinforcement.” ACI Structural Journal, Vol. 98, No. 4, pp. 600–608. DOI: 10.14359/10303.
Ministry of Housing and Urban-Rural Development (2010). “Code for Seismic Design of Buildings GB50010-2010.” Beijing, China.
Mazzolani, F. M. and Piluso, V. (1995). “Failure mode and ductility control of seismic resistant MR-frames.” Costruzioni Metalliche, Vol. 2, pp. 11–28.
McKenna, F., Fenves, G. L., and Scott, M. H. (2008). “Open system for earthquake engineering simulation.” Pacific Earthquake Engineering Research Center, University of California at Berkeley, California.
Neville A. and Aitcin P. C. (1998). “High performance concrete-an overview.” Materials & Structures, Vol. 31, pp. 111–117, DOI: 10.1007/BF02486473.
Prasad, K. R., Bharatkumar, B. H., Ramachandra, D. S., Narayanan, R., and Gopalakrishnan, S. (2005). “Fracture mechanics model for analysis of plain and reinforced high-performance concrete beams.” Journal of Engineering Mechanics, Vol. 131, No. 8, pp. 831–838, DOI: 10.1061/(ASCE)0733-9399(2005)131:8(831).
Priestley, V. J. N., Verma, R., and Xiao, Y. (1994). “Seismic shear strength of reinforced concrete columns.” Journal of Structural Engineering, Vol. 120, No. 7, pp. 2310–2329, DOI: 10.1061/(ASCE) 0733-9445(1994)120:8(2310).
Park, R. (1989). “Evaluation of ductility of structures and structural assemblages from laboratory testing.” Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 22, No. 3, pp. 155–166.
Paulay, T. and Priestley, M. J. N. (1995). Seismic design of reinforced concrete and masonry buildings, John Wiley & Sons. Ltd. New York.
Park, R. and Paulay, T. (1975). Reinforced Concrete Structures, John Wiley & Sons. Ltd. New York.
Scott, B. D., Park, R., and Priestley, M. J. N. (1982). “Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates.” ACI Journal, Vol. 84, No. 4, pp. 13–27, DOI: 10.14359/10875.
Taucer, F. F., Spacone, E., and Filippou, F. C. (1991). A Fiber Beamcolumn Element for Seismic Response Analysis of RC Structures EERC Report 91/17, Earthquake Engineering Research Center. University of California. Berkeley. CA.
Woods, J. M., Kiousis, P. D., Ehsani, M. R., Saadatmanesh, H., and Fritz, W. (2007). “Bending ductility of rectangular high strength concrete columns.” Engineering Structures, Vol. 29, No. 8, pp. 1783–1790, DOI: 10.1016/j.engstruct.2006.09.024.
Wu, K. R., Yan, A., Yao, W., and Dong Z. (2001). “Effect of metallic aggregate on strength and fracture properties of HPC.” Cement & Concrete Research, Vol. 31, No. 2, pp. 113–118, DOI: 10.1016/S0008-8846(00)00431-2.
Xiao, Y. and Ma, R. (1998). Seismic Behaviour of High Strength Concrete Beams, John Wiley & Sons. Ltd. Structural design tall building.
Xiao, Y. and Martirossyan, A. (1998). “Seismic performance of highstrength concrete columns.” Journal of Structural Engineering, Vol. 124, No. 3, pp. 241–251, DOI: 10.1061/(ASCE)0733-9445 (1998)124:3(241).
Xue, W. C., Li, L., Cheng, B., and Li, J. (2008). “The reversed cyclic load tests of normal and pre-stressed concrete beams.” Engineering Structures, Vol. 30, pp. 1014–1023, DOI: 10.1016/j.engstruct.2007. 06.001.
Xue, W. C., Cheng, B., and Li, L. (2011). “Seismic performance of nonprestressed and prestressed HPC frames under low reversed cyclic loading.” Journal of Structural Engineering, Vol. 137, No. 11, pp. 1254–1262, DOI: 10.1061/(ASCE)ST.1943-541X.0000367.
Yao, W., Li, J., and Wu, K. R. (2003). “Mechanical properties of fiberreinforced concrete at low fiber volume fraction.” Cement & Concrete Research, Vol. 33, No. 1, pp. 27–30, DOI: 10.1016/S0008-8846(02)00913-4.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xue, W., Hu, X. Seismic performance of a four-story two-bay high-performance concrete frame under low reversed cyclic loading. KSCE J Civ Eng 21, 2707–2716 (2017). https://doi.org/10.1007/s12205-017-0435-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-017-0435-y