Abstract
Various tests, focusing on the effects of the type and composition of cementitious materials (ordinary Portland cement, fly ash, slag, low-heat cement, and their combinations) on the mechanical properties and durability of high-strength concrete, were performed to provide experimental data for the application of high-strength concrete to prestressed bridges. Firstly, mix proportions were designed based on a number of trial mixes, taking into account their applicability to prestressed bridges. Mechanical properties, such as compressive strength, modulus of elasticity, splitting tensile strength and flexural strength, were determined. Durability related properties, such as temperature of hydration, resistance to chloride-ion penetration, resistance to freezing-thawing, autogenous and drying shrinkages and creep, were also determined. The effects of cementitious materials on the various properties of high-strength concrete have been demonstrated.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
ACI Committee 318 (2011). Building code requirements for structural concrete (ACI 318-11) and commentary (318R-11), American Concrete Institute, Farmington Hill, Mich.
ACI Committee 363 (2010). Report on high-strength concrete (ACI 363R-10), American Concrete Institute, Farmington Hills, Mich.
Al-Amoudia, O. S. B., Al-Kuttia, W. A., Ahmada, S., and Maslehuddin, M. (2009). “Correlation between compressive strength and certain durability indices of plain and blended cement concretes.” Cement and Concrete Composites, Elsevier, Vol. 31, No. 9, pp. 672–676, DOI: 10.1016/j.cemconcomp.2009.05.005.
ASTM C157 (2008). Standard test method for length change of hardened hydraulic-cement mortar and concrete, ASTM International, West Conshohocken, PA.
ASTM C215 (2008). Standard test method for fundamental transverse, longitudinal, and torsional frequencies of concrete specimens, ASTM International, West Conshohocken, PA.
ASTM C39 (2011). Standard test method for compressive strength of cylindrical concrete specimens, ASTM International, West Conshohocken, PA.
ASTM C469 (2010). Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression, ASTM International, West Conshohocken, PA.
ASTM C496 (2011). Standard test method for splitting tensile strength of cylindrical concrete specimens, ASTM International, West Conshohocken, PA.
ASTM C512 (2010). Standard test method for creep of concrete in compression, ASTM International, West Conshohocken, PA.
ASTM C666 (2008). Standard test method for resistance of concrete to rapid freezing and thawing, ASTM International, West Conshohocken, PA.
ASTM C78 (2010). Standard test method for flexural strength of concrete (using simple beam with third-point loading), ASTM International, West Conshohocken, PA.
FIP-CEB Working Group on High Strength Concrete (1990). High strength concrete: State-of-the-art report, CEB bulletin d’Information No. 197, FIP-CEB, London.
Hueste, M. B. D., Chompreda, P., Trejo, D., Cline, D. B. H., and Keating, P. B. (2004). “Mechanical properties of high-strength concrete for prestressed members.” ACI Structural Journal, American Concrete Institute, Vol. 101, No. 4, pp. 457–465, DOI: 10.14359/13331.
Japan Concrete Institute(JCI) Technical Committee on Autogenous Shrinkage of Concrete (1999). Committee report-autogenous shrinkage of concrete, E & FN Spon, London and New York.
Jiang, C., Yang, Y., Wang, Y., Zhou, Y., and Ma, C. (2014). “Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures.” Construction and Building Materials, Elsevier, Vol. 61, pp. 260–269, DOI: 10.1016/j.conbuildmat.2014.03.023.
Kayalia, O., Haque, M. N., and Zhu, B. (1999). “Drying shrinkage of fibre-reinforced lightweight aggregate concrete containing fly ash.” Cement and Concrete Research, Elsevier, Vol. 29, No. 11, pp. 1835–1840, DOI: 10.1016/S0008-8846(99)00179-9.
Khatri, R. P., Sirivivatnanon, V., and Gross, W. (1995). “Effect of different supplementary cementitious materials on mechanical properties of high performance concrete.” Cement and Concrete Research, Elsevier, Vol. 25, No. 1, pp. 209–220, DOI: 10.1016/0008-8846(94)00128-L.
Lee, S. H. and Kwon, S. J. (2012). “Experimental study on the relationship between time-dependent chloride diffusion coefficient and compressive strength.” Journal of the Korea Concrete Institute, Korea Concrete Institute, Vol. 24, No. 6, pp. 715–726, DOI: 10.4334/JKCI.2012.24.6.715. (in Korean).
Leng, F., Feng, N., and Lu, X. (2000). “An experimental study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete.” Cement and Concrete Research, Elsevier, Vol. 30, No. 6, pp. 989–992, DOI: 10.1016-S0008-8846(00)00250-7.
Lim, S. N. and Wee, T. H. (2000). “Autogenous shrinkage of groundgranulated blast-furnace slag concrete.” ACI Materials Journal, American Concrete Institute, Vol. 97, No. 5, pp. 587–593, DOI: 10.14359/9291.
Mehta, P. K. and Monteiro, P. J. M. (1993).Concrete: Structure, properties, and materials, 2nd ed., Prentice-Hall, New Jersey.
Mokhtarzadeh, A., Kriesel, R., French, C., and Snyder, M. (1995). “Mechanical properties and durability of high-strength concrete for prestressed bridge girders.” Transportation Research Record, Transportation Research Board, Issue 1478, pp. 20–29.
Mu, R., Miao, C., Luo, X., and Sun, W. (2002). “Combined deterioration of concrete subjected to loading, freeze-thaw cycles and chloride salt attack.” Magazine of Concrete Research, ICE Publishing, Vol. 54, No. 3, pp. 175–180, DOI: 10.1680/macr.2002.54.3.175.
Nagrockiene, D., Pundiene, I., and Kicaite, A. (2013). “The effect of cement type and plasticizer addition on concrete properties.” Construction and Building Materials, Elsevier, Vol. 45, pp. 324–331, DOI: 10.1016/j.conbuildmat.2013.03.076.
Neville, A. M. (1995). Properties of concrete, 4th ed., Longman Group Ltd., London.
Ramezanianpour, A. A., Pilvar, A., Mahdikhani, M., and Moodi, F. (2011). “Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength.” Construction and Building Materials, Elsevier, Vol. 25, No. 5, pp. 2472–2479, DOI: 10.1016/j.conbuildmat.2010.11.069.
Ravindrarajah, R. S. and Tam, C. T. (1989). “Properties of concrete containing low-calcium fly ash under hot and humid climate.” ACI Special Publication, American Concrete Institute, Vol. 114, pp. 139–156, DOI: 10.14359/1894.
Russell, B. W. (1994). “Impact of high-strength concrete on the design and construction of pretensioned girder bridges.” PCI Journal, Precast/Prestressed Concrete Institute, Vol. 39, No. 4, pp. 76–89.
Saak, A. W., Jennings, H. M., and Shah, S. P. (2004). “A generalized approach for the determination of yield stress by slump and slump flow.” Cement and Concrete Research, Elsevier, Vol. 34, No. 3, pp. 363–371, DOI: 10.1016/j.cemconres.2003.08.005.
Sivasundaram, V., Carette, G. G., and Malhotra, V. M. (1991). “Mechanical properties, creep, and resistance to diffusion of chloride ions of concretes incorporating high volumes of ASTM Class F fly ashes from seven different sources.” ACI Materials Journal, American Concrete Institute, Vol. 88, No. 4, pp. 407–416, DOI: 10.14359/1930.
Tazawa, E. and Miyazawa, S. (1995). “Influence of cement and admixture on autogenous shrinkage of cement paste.” Cement and Concrete Research, Elsevier, Vol. 25, No. 2, pp. 281–287, DOI: 10.1016/0008-8846(95)00010-0.
Toutanji, H., Delatte, N., Aggoun, S., Duval, R., and Danson, A. (2004). “Effect of supplementary cementitious materials on the compressive strength and durability of short-term cured concrete.” Cement and Concrete Research, Elsevier, Vol. 34, No. 2, pp. 311–319, DOI: 10.1016/j.cemconres.2003.08.017.
Yazdani, N., Bergin, M., and Majtaba, G. (2000). “Effect of pumping on properties of bridge concrete.” Journal of Materials in Civil Engineering, American Society of Civil Engineers, Vol. 12, No. 3, pp. 212–219, DOI: 10.1061/(ASCE)0899-1561(2000)12:3(212).
Yoo, J. K., Park, S. J., and Oh, B. H. (2007). “Effects of cement and mineral admixture on migration of chloride ions and generation of hydration heat in concrete.” Daewoo Construction Technology Report, Daewoo Engineering & Construction Co. Ltd., Vol. 29, pp. 106–115.
Yoon, E. S., Lee, T. W., and Park, S. B. (2005). “Analysis of correlation between compressive strength, void ratio and chloride diffusion coefficient of concrete using various kinds of cement.” Journal of the Korea Concrete Institute, Korea Concrete Institute, Vol. 17, No. 5, pp. 735–742 (in Korean).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, JH., Yoon, YS. The effects of cementitious materials on the mechanical and durability performance of high-strength concrete. KSCE J Civ Eng 19, 1396–1404 (2015). https://doi.org/10.1007/s12205-014-0658-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-014-0658-0