Abstract
Mechanical biological treatment (MBT) technology has attracted increasing attention because it can reduce the volume of waste produced. To deal with the current trend of increasing waste, MBT practices are being adopted to address waste generated in developing urban societies. In this study, a total of 20 specimens of consolidated undrained triaxial tests were conducted on waste obtained from the Hangzhou Tianziling landfill, China, to evaluate the effect of loading rate on the shear strength parameters of MBT waste. The MBT waste samples exhibited an evident strain-hardening behavior, and no peak was observed even when the axial strain exceeded 25%. Further, the shear strength increased with an increase in the loading rate; the effect of loading rate on shear strength under a low confining pressure was greater than that under a high confining pressure. Furthermore, the shear strength parameters of MBT waste were related to the loading rate. The relationship between the cohesion, internal friction angle, and logarithm of the loading rate could be fitted to a linear relationship, which was established in this study. Finally, the ranges of shear strength parameters cohesion c and effective cohesion c′ were determined as 1.0–8.2 kPa and 2.1–14.9 kPa, respectively; the ranges of the internal friction angle φ and effective internal friction angle φ’ were determined as 16.2°–29° and 19.8°–43.9°, respectively. These results could be used as a valuable reference for conducting stability analyses of MBT landfills.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Anderson D G, Kavazanjian E Jr (1995). Performance of landfills under seismic loading. In: Proceedings of the 3rd International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, Missouri. Colombia: University of Missouri-Rolla, 277–306
Babu G L S, Lakshmikanthan P, Santhosh L G (2015). Shear strength characteristics of mechanically biologically treated municipal solid waste (MBT-MSW) from Bangalore. Waste Management, 39: 63–70
Bhandari A R, Powrie W (2013). Behavior of an MBT waste in monotonic triaxial shear tests. Waste Management, 33(4): 881–891
Bray J, Zekkos D, Kavazanjian EJr, Athanasopoulos G, Riemer M (2009). Shear strength of municipal solid waste. Journal of Geotechnical and Geoenvironmental Engineering, 135(6): 709–722
Butt H J, Kappl M (2009). Normal capillary forces. Advances in Colloid and Interface Science, 146(1–2): 48–60
Calle J A C (2007). Geomechanical behavior of urban solid waste. Dissertation for the Doctoral Degree. Rio de Janeiro: Federal University of Rio de Janeiro
Cañizal J, Lapeña P, Castro J, Costa A, Sagaseta C (2011). Determination of shear strength of MSW. Field tests vs. laboratory tests. In: 4th International Workshop “Hydro-Physico-Mechanics of Landfills,” Santander. Santander: University of Cantabria, 3005–3008
Casagrande M D T, Coop M R, Consoli N C (2006). Behavior of a fiber reinforced bentonite at large shear displacements. Journal of Geotechnical and Geoenvironmental Engineering, 132(11): 1505–1508
Cho Y M, Ko J H, Chi L, Townsend T G (2011). Food waste impact on municipal solid waste angle of internal friction. Waste Management, 31(1): 26–32
Consoli N C, Casagrande M D T, Coop M R (2007). Performance of a fibre-reinforced sand at large shear strains. Geotechnique, 57(9): 751–756
De Lamare Neto A (2004). Shearing resistance of urban solid waste and granular materials with fibers. Dissertation for the Doctoral Degree. Rio de Janeiro: Federal University of Rio de Janeiro
Díaz-Rodríguez J A, Martínez-Vasquez J J, Santamarina J C (2009). Strain-rate effects in Mexico City soil. Journal of Geotechnical and Geoenvironmental Engineering, 135(2): 300–305
EC (1999). Council Directive 1999/31/EC of 26 April 1999 on the Landfill of Waste. Official Journal of the European Communities, 182: 1–19
Falamaki A, Ghareh S, Homaee M, Hamtaeipour S A, Abedpour S, Kiani S, Mousavi N, Rezaei M, Taghizadeh M M, Dehbozorgi M, Nouri A (2020). Laboratory shear strength measurements of municipal solid waste at room and simulated in situ landfill temperature, Barmshoor Landfill, Iran. International Journal of Civil Engineering, 18(2): 185–197
Falamaki A, Homaee M, Baneshi Z, Salari M (2022). Simulating effect of potassium carbonate on quantity and quality of municipal solid waste leachate. International Journal of Civil Engineering, 20(2): 185–194
Feng S J (2005). Static and dynamic strength properties of municipal solid waste and stability analyses of landfill. Dissertation for the Doctoral Degree. Hangzhou: Zhejiang University (in Chinese)
Fernando V I (2011). Shear strength characteristics of mechanically biologically treated (MBT) waste. Dissertation for the Doctoral Degree. Hampshire: University of Southampton
Fucale S, Jucá J F T, Muennich K (2015). The mechanical behavior of MBT—waste. Electron Journal of Geotechnical and Geoenvironmental Engineering, 20(13): 5927–5937
Fucale S P (2005). Influence of the reinforcement components in the resistance of municipal solid waste. Dissertation for the Doctoral Degree. Recife: Federal Univesrity of Pernambuco
Gabr M A, Valero S N (1995). Geotechnical properties of municipal solid waste. Geotechnical Testing Journal, 18(2): 241–251
Grisolia M, Napoleoni Q, Tangredi G (1995). The use of triaxial tests for the mechanical characterization of municipal solid waste. In: Proceedings of the 5th International Landfill Symposium-Sardinia. Cagliari, Italy: CISA, Environmental Sanitary Engineering Centre, 761–767
Harris J M, Shafer A L, DeGroff W, Hater G R, Gabr M A, Bariaz M (2006). Shear strength of degraded reconstituted municipal solid waste. Geotechnical Testing Journal, 29(2): 141–148
Jessberger H L, Syllwasschy O, Kockel R (1995). Investigation of waste body behaviour and waste structure interaction. In: Proceedings of the 5th International Landfill Symposium-Sardinia. Cagliari, Italy: CISA, Environmental Sanitary Engineering Centre, 731–743
Karimpour-Fard M, Machado S L, Shariatmadari N, Noorzad A (2011). A laboratory study on the MSW mechanical behavior in triaxial apparatus. Waste Management, 31(8): 1807–1819
Kaza S, Yao L, Bhada-Tata P, Woerden F V (2018). What a waste 2.0: A global snapshot of solid waste management to 2050. Washington, DC: World Bank Publications
Ke H, Hu J, Xu X B, Wang W F, Chen Y M, Zhan L T (2017). Evolution of saturated hydraulic conductivity with compression and degradation for municipal solid waste. Waste Management, 65: 63–74
Kölsch F (1995). Material values for some mechanical properties of domestic waste. In: Proceedings of the 5th International Landfill Symposium-Sardinia. Cagliari, Italy: CISA, Environmental Sanitary Engineering Centre, 711–729
Kralchevsky P A, Nagayama K (1994). Capillary forces between colloidal particles. Langmuir, 10(1): 23–36
Lakshmikanthan P, Sughosh P, Babu G L S (2018). Studies on characterization of mechanically biologically treated waste from Bangalore city. Indian Geotechnical Journal, 48(2): 293–304
Lefebvre G, LeBoeuf D (1987). Rate effects and cyclic loading of sensitive clays. Journal of Geotechnical Engineering, 113(5): 476–489
Li G X (2016). Strength of soils. In: Li G X, ed. Advanced Soil Mechanics. 2nd ed. Beijing: Tsinghua University Press, 140–146 (in Chinese)
Lu W, Huo W, Gulina H, Pan C (2022). Development of machine learning multi-city model for municipal solid waste generation prediction. Frontiers of Environmental Science & Engineering, 16(9): 119
Machado S L, Carvalho M F, Vilar O M (2002). Constitutive model for municipal solid waste. Journal of Geotechnical and Geoenvironmental Engineering, 128(11): 940–951
Petrovic I (2016). Mini-review of the geotechnical parameters of municipal solid waste: Mechanical and biological pre-treated versus raw untreated waste. Waste Management & Research, 34(9): 840–850
Pimolthai P, Wagner J F (2014). Soil mechanical properties of MBT waste from Luxembourg, Germany and Thailand. Songklanakarin Journal of Science and Technology, 36(6): 701–709
Powrie W, Beaven R P (1999). Hydraulic properties of household waste and implications for landfills. Geotechnical Engineering, 137(4): 235–247
Pulat H F, Yukselen-Aksoy Y (2017). Factors affecting the shear strength behavior of municipal solid wastes. Waste Management, 69: 215–224
Ramaiah B J, Ramana G V (2017). Study of stress-strain and volume change behavior of emplaced municipal solid waste using large-scale triaxial testing. Waste Management, 63: 366–379
Reddy K R, Hettiarachchi H, Parakalla N S, Gangathulasi J, Bogner J E (2009). Geotechnical properties of fresh municipal solid waste at Orchard Hills Landfill, USA. Waste Management, 29(2): 952–959
Shariatmadari N, Machado S L, Noorzad A, Karimpour-Fard M (2009). Municipal solid waste effective stress analysis. Waste Management, 29(12): 2918–2930
Stoll O W (1971). Mechanical properties of milled refuse. Phoenix, Arizona: ASCE National Water Resources Engineering Meeting, 11–15
Van Impe W F (1998). Environmental geotechnics: ITC 5 activities, state of art. In: Proceedings of the 3rd International Congress on Environmental Geotechnics. Lisbon, Portugal: Balkema, 1163–1187
Vilar O M, Carvalho M F (2005). Shear strength and consolidation properties of municipal solid waste. In: International Workshop on Hydro-Physico-Mechanics of Landfills. Grenoble, France: Grenoble 1 University, 21–22
Xue Q, Li J S, Zhao Y, Chen Z L, Feng X T, Ma S P, Deng Z G, Liu Y, Lu H J, Liu X L, Chen X Y, Xie W G (2013). Technical Specification for Soil Test of Landfilled Municipal Solid Waste CJJ/T204-2013. Beijing: China Architecture and Building Press (in Chinese)
Zekkos D, Athanasopoulos G A, Bray J D, Grizi A, Theodoratos A (2010). Large-scale direct shear testing of municipal solid waste. Waste Management, 30(8–9): 1544–1555
Zekkos D, Bray J D, Athanasopoulos G A, Riemer M F, Kavazanjian E, Founta X, Grizi A (2007). Compositional and loading rate effects on the shear strength of municipal solid waste. In: Proceedings of the 4th International conference on earthquake geotechnical engineering. Thessaloniki, Greece: Springer, 25–28
Zhang Z Y, Wang Y X, Fang Y H, Pan X F, Zhang J H, Xu H (2020). Global study on slope instability modes based on 62 municipal solid waste landfills. Waste Management & Research, 38(12): 1389–1404
Zhao Y R, Xie Q, Wang G L, Zhang Y J, Zhang Y X, Su W (2014). A study of shear strength properties of municipal solid waste in Chongqing landfill, China. Environmental Science and Pollution Research International, 21(22): 12605–12615
Acknowledgements
This research was funded by the National Natural Science Foundation of China (Nos. 51978625 and 51678532) and the Zhejiang Provincial Natural Science Foundation of China (No. LZ21E080003). The authors are grateful for the assistance provided by the Hangzhou Environmental Group, China.
Author information
Authors and Affiliations
Corresponding author
Additional information
Highlights
• Mechanical behavior of MBT waste affected by loading rate was investigated.
• Shear strength ratio of MBT waste increases with an increase in loading rate.
• Cohesion is inversely related to loading rate.
• Internal friction angles are positively related to loading rate.
• MBT waste from China shows smaller range of φ.
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Fan, G., Zhang, Z., Zhang, J. et al. Effect of loading rate on shear strength parameters of mechanically and biologically treated waste. Front. Environ. Sci. Eng. 16, 160 (2022). https://doi.org/10.1007/s11783-022-1595-7
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11783-022-1595-7