Abstract
This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete slabs. In this paper, we focus on the comparison of the performance of the plain and reinforced concrete slabs of unconfined compressive strength 41 MPa under ballistic impact. The concrete slab has dimensions of 675 mm × 675 mm × 200 mm, and is meshed with 8-node hexahedron solid elements in the impact and outer zones. The ogive-nosed projectile is considered as rigid element that has a mass of 0.386 kg and a length of 152 mm. The applied velocities vary between 540 and 731 m/s. 6 mm of steel reinforcement bars were used in the reinforced concrete slabs. The constitutive material modeling of the concrete and steel reinforcement bars was performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. The analysis was conducted using the commercial finite element package Abaqus/Explicit. Damage diameters and residual velocities obtained by the numerical model were compared with the experimental results and effect of steel reinforcement and projectile diameter were studies. The validation showed good agreement between the numerical and experimental results. The added steel reinforcements to the concrete samples were found efficient in terms of ballistic resistance comparing to the plain concrete sample.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Plotzitza A, Rabczuk T, Eibl J. Techniques for numerical simulations of concrete slabs for demolishing by blasting. Journal of Engineering Mechanics, 2007, 133(5): 523–533
Oucif C, Mauludin L M. Numerical modeling of high velocity impact applied to reinforced concrete panel. Underground Space, 2018, 4(1): 1–9
Rabczuk T, Akkermann J, Eibl J. A numerical model for reinforced concrete structures. International Journal of Solids and Structures, 2005, 42(5–6):1327–1354
Rabczuk T, Belytschko T. Application of particle methods to static fracture of reinforced concrete structures. International Journal of Fracture, 2006, 137(1–4): 19–49
Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H. A geometrically nonlinear three-dimensional cohesive crack method for reinforced concrete structures. Engineering Fracture Mechanics, 2008, 75(16): 4740–4758
Oucif C, Ouzaa K, Stoian V, Dăescu C A. Numerical modeling of reinforced concrete strengthened columns under cyclic loading. Arabian Journal for Science and Engineering, 2017, 42(9): 3933–3944
Oucif C, Ouzaa K, Mauludin L M. Cyclic and monotonic behavior of strengthened and unstrengthened square reinforced concrete columns. Journal of Applied and Computational Mechanics, 2019, 5(3): 517–525
Rabczuk T, Eibl J. Modelling dynamic failure of concrete with meshfree methods. International Journal of Impact Engineering, 2006, 32(11): 1878–1897
Kalameh H A, Karamali A, Anitescu C, Rabczuk T. High velocity impact of metal sphere on thin metallic plate using smooth particle hydrodynamics (SPH) method. Frontiers of Structural and Civil Engineering, 2012, 6(2): 101–110
Diyaroglu C, Oterkus E, Madenci E, Rabczuk T, Siddiq A. Peridynamic modeling of composite laminates under explosive loading. Composite Structures, 2016, 144: 14–23
Hu F, Wu H, Fang Q, Liu J C, Liang B, Kong X Z. Impact performance of explosively formed projectile (EFP) into concrete targets. International Journal of Impact Engineering, 2017, 109: 150–166
Rabczuk T, Eibl J. Simulation of high velocity concrete fragmentation using SPH/MLSPH. International Journal for Numerical Methods in Engineering, 2003, 56(10): 1421–1444
Rabczuk T, Eibl J, Stempniewski L. Numerical analysis of high speed concrete fragmentation using a meshfree lagrangian method. Engineering Fracture Mechanics, 2004, 71(4–6): 547–556
Groeneveld A B, Ahlborn T M, Crane C K, Burchfield C A, Landis E N. Dynamic strength and ductility of ultra-high performance concrete with flow-induced fiber alignment. International Journal of Impact Engineering, 2018, 111: 37–45
Lu D, Wang G, Du X, Wang Y. A nonlinear dynamic uniaxial strength criterion that considers the ultimate dynamic strength of concrete. International Journal of Impact Engineering, 2017, 103: 124–137
Hanchak S J, Forrestal M J, Young E R, Ehrgott J Q. Perforation of concrete slabs with 48 MPa (7 ksi) and 140 MPa (20 ksi) unconfined compressive strengths. International Journal of Impact Engineering, 1992, 12(1): 1–7
Borvik T, Langseth M, Hopperstad O S, Polanco-Loria M A. Ballistic perforation resistance of high performance concrete slabs with different unconfined compressive strengths. WIT Transactions on the Built Environment, 2002, 59: 273–282
Cai J, Ye J, Wang Y, Chen Q. Numerical study on dynamic response of reinforced concrete columns under low-speed horizontal impact loading. Procedia Engineering, 2017, 210: 334–340
Li J, Wu C, Hao H, Su Y, Li Z X. A study of concrete slabs with steel wire mesh reinforcement under close-in explosive loads. International Journal of Impact Engineering, 2017, 110: 242–254
Liu J, Wu C, Li J, Su Y, Shao R, Liu Z, Chen G. Experimental and numerical study of reactive powder concrete reinforced with steel wire mesh against projectile penetration. International Journal of Impact Engineering, 2017, 109: 131–149
Isaac P, Darby A, Ibell T, Evernden M. Experimental investigation into the force propagation velocity due to hard impacts on reinforced concrete members. International Journal of Impact Engineering, 2017, 100: 131–138
Othman H, Marzouk H. An experimental investigation on the effect of steel reinforcement on impact response of reinforced concrete plates. International Journal of Impact Engineering, 2016, 88: 12–21
Thai D K, Kim S E, Bui T Q. Modified empirical formulas for predicting the thickness of RC panels under impact loading. Construction & Building Materials, 2018, 169: 261–275
Feng J, Song M, He Q, Sun W, Wang L, Luo K. Numerical study on the hard projectile perforation on RC panels with ldpm. Construction & Building Materials, 2018, 183: 58–74
Thai D K, Kim S E. Numerical investigation of the damage of RC members subjected to blast loading. Engineering Failure Analysis, 2018, 92: 350–367
Zhao D B, Yi W J, Kunnath S K. Numerical simulation and shear resistance of reinforced concrete beams under impact. Engineering Structures, 2018, 166: 387–401
Kong X, Fang Q, Wu H, Peng Y. Numerical predictions of cratering and scabbing in concrete slabs subjected to projectile impact using a modified version of HJC material model. International Journal of Impact Engineering, 2016, 95: 61–71
Kong X, Fang Q, Li Q M, Wu H, Crawford J E. Modified K&C model for cratering and scabbing of concrete slabs under projectile impact. International Journal of Impact Engineering, 2017, 108: 217–228
Kong X, Fang Q, Chen L, Wu H. A new material model for concrete subjected to intense dynamic loadings. International Journal of Impact Engineering, 2018, 120: 60–78
Navas P, Yu R C, Li B, Ruiz G. Modeling the dynamic fracture in concrete: An eigensoftening meshfree approach. International Journal of Impact Engineering, 2018, 113: 9–20
Rabczuk T, Belytschko T. Adaptivity for structured meshfree particle methods in 2D and 3D. International Journal for Numerical Methods in Engineering, 2005, 63(11): 1559–1582
Rabczuk T, Areias P M A, Belytschko T. A meshfree thin shell method for non-linear dynamic fracture. International Journal for Numerical Methods in Engineering, 2007, 72(5): 524–548
Rabczuk T, Belytschko T. A three-dimensional large deformation meshfree method for arbitrary evolving cracks. Computer Methods in Applied Mechanics and Engineering, 2007, 196(29–30): 2777–2799
Rabczuk T, Bordas S P A, Askes H. Meshfree Discretization Methods for Solid Mechanics. New Jersey: John Wiley & Sons, 2010
Zi G, Rabczuk T, Wall W. Extended meshfree methods without branch enrichment for cohesive cracks. Computational Mechanics, 2007, 40(2): 367–382
Bordas S, Rabczuk T, Zi G. Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by an extended meshfree method without asymptotic enrichment. Engineering Fracture Mechanics, 2008, 75(5): 943–960
Amiri F, Millán D, Shen Y, Rabczuk T, Arroyo M. Phase-field modeling of fracture in linear thin shells. Theoretical and Applied Fracture Mechanics, 2014, 69: 102–109
Amiri F, Anitescu C, Arroyo M, Bordas S P A, Rabczuk T. XLME interpolants, a seamless bridge between XFEM and enriched meshless methods. Computational Mechanics, 2014, 53(1): 45–57
Fu Z J, Xi Q, Chen W, Cheng A H D. A boundary-type meshless solver for transient heat conduction analysis of slender functionally graded materials with exponential variations. Computers & Mathematics with Applications, 2018, 76(4): 760–773
Fu Z, Chen W, Wen P, Zhang C. Singular boundary method for wave propagation analysis in periodic structures. Journal of Sound and Vibration, 2018, 425: 170–188
Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H. A simple and robust three-dimensional cracking-particle method without enrichment. Computer Methods in Applied Mechanics and Engineering, 2010, 199(37–40): 2437–2455
Rabczuk T, Belytschko T. Cracking particles: A simplified meshfree method for arbitrary evolving cracks. International Journal for Numerical Methods in Engineering, 2004, 61(13): 2316–2343
Ren H, Zhuang X, Rabczuk T. Dual-horizon peridynamics: A stable solution to varying horizons. Computer Methods in Applied Mechanics and Engineering, 2017, 318: 762–782
Ren H, Zhuang X, Cai Y, Rabczuk T. Dual-horizon peridynamics. International Journal for Numerical Methods in Engineering, 2016, 108(12): 1451–1476
Areias P, Reinoso J, Camanho P P, César de Sá J, Rabczuk T. Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation. Engineering Fracture Mechanics, 2018, 189: 339–360
Areias P, Rabczuk T. Steiner-point free edge cutting of tetrahedral meshes with applications in fracture. Finite Elements in Analysis and Design, 2017, 132: 27–41
Areias P, Msekh M A, Rabczuk T. Damage and fracture algorithm using the screened poisson equation and local remeshing. Engineering Fracture Mechanics, 2016, 158: 116–143
Ghorashi S S, Valizadeh N, Mohammadi S, Rabczuk T. T-spline based XIGA for fracture analysis of orthotropic media. Computers & Structures, 2015, 147: 138–146
Areias P, Rabczuk T, Camanho P P. Finite strain fracture of 2D problems with injected anisotropic softening elements. Theoretical and Applied Fracture Mechanics, 2014, 72: 50–63
Areias P, Rabczuk T, Dias-da Costa D. Element-wise fracture algorithm based on rotation of edges. Engineering Fracture Mechanics, 2013, 110: 113–137
Areias P, Rabczuk T. Finite strain fracture of plates and shells with configurational forces and edge rotations. International Journal for Numerical Methods in Engineering, 2013, 94(12): 1099–1122
Chau-Dinh T, Zi G, Lee P S, Rabczuk T, Song J H. Phantom-node method for shell models with arbitrary cracks. Computers & Structures, 2012, 92–93: 242–256
Rabczuk T, Bordas S, Zi G. On three-dimensional modelling of crack growth using partition of unity methods. Computers & Structures, 2010, 88(23–24): 1391–1411
Rabczuk T, Gracie R, Song J H, Belytschko T. Immersed particle method for fluid-structure interaction. International Journal for Numerical Methods in Engineering, 2010, 81(1): 48–71
Mauludin L M, Oucif C. Interaction between matrix crack and circular capsule under uniaxial tension in encapsulation-based selfhealing concrete. Underground Space, 2018, 3(3): 181–189
Mauludin L M, Oucif C. The effects of interfacial strength on fractured microcapsule. Frontiers of Structural and Civil Engineering, 2019, 13(2): 353–363
Oucif C, Voyiadjis G Z, Kattan P I, Rabczuk T. Nonlinear superhealing and contribution to the design of a new strengthening theory. Journal of Engineering Mechanics, 2018, 144(7): 04018055
Oucif C, Voyiadjis G Z, Rabczuk T. Modeling of damage-healing and nonlinear self-healing concrete behavior: Application to coupled and uncoupled self-healing mechanisms. Theoretical and Applied Fracture Mechanics, 2018, 96: 216–230
Oucif C, Voyiadjis G Z, Kattan P I, Rabczuk T. Investigation of the super healing theory in continuum damage and healing mechanics. International Journal of Damage Mechanics, 2018, 28(6): 896–917
Msekh M A, Cuong N H, Zi G, Areias P, Zhuang X, Rabczuk T. Fracture properties prediction of clay/epoxy nanocomposites with interphase zones using a phase field model. Engineering Fracture Mechanics, 2018, 188: 287–299
Amani J, Oterkus E, Areias P, Zi G, Nguyen-Thoi T, Rabczuk T. A non-ordinary state-based peridynamics formulation for thermoplastic fracture. International Journal of Impact Engineering, 2016, 87: 83–94
Gui Y L, Bui H H, Kodikara J, Zhang Q B, Zhao J, Rabczuk T. Modelling the dynamic failure of brittle rocks using a hybrid continuum-discrete element method with a mixed-mode cohesive fracture model. International Journal of Impact Engineering, 2016, 87: 146–155
Talebi H, Silani M, Rabczuk T. Concurrent multiscale modeling of three dimensional crack and dislocation propagation. Advances in Engineering Software, 2015, 80: 82–92
Talebi H, Silani M, Bordas S P A, Kerfriden P, Rabczuk T. A computational library for multiscale modeling of material failure. Computational Mechanics, 2014, 53(5): 1047–1071
Budarapu P R, Gracie R, Bordas S P A, Rabczuk T. An adaptive multiscale method for quasi-static crack growth. Computational Mechanics, 2014, 53(6): 1129–1148
Budarapu P R, Gracie R, Yang SW, Zhuang X, Rabczuk T. Efficient coarse graining in multiscale modeling of fracture. Theoretical and Applied Fracture Mechanics, 2014, 69: 126–143
Zhou S, Zhuang X, Zhu H, Rabczuk T. Phase field modelling of crack propagation, branching and coalescence in rocks. Theoretical and Applied Fracture Mechanics, 2018, 96: 174–192
Zhou S, Zhuang X, Rabczuk T. A phase-field modeling approach of fracture propagation in poroelastic media. Engineering Geology, 2018, 240: 189–203
Zhou S, Rabczuk T, Zhuang X. Phase field modeling of quasi-static and dynamic crack propagation: COMSOL implementation and case studies. Advances in Engineering Software, 2018, 122: 31–49
Zhou S W, Xia C C. Propagation and coalescence of quasistatic cracks in Brazilian disks: An insight from a phase field model. Acta Geotechnica, 2018, 14: 1195–1214
Areias P, Rabczuk T, Msekh M A. Phase-field analysis of finitestrain plates and shells including element subdivision. Computer Methods in Applied Mechanics and Engineering, 2016, 312: 322–350
Badnava H, Etemadi E, Msekh M. A phase field model for ratedependent ductile fracture. Metals, 2017, 7(5): 180
Liu G, Li Q, Msekh M A, Zuo Z. Abaqus implementation of monolithic and staggered schemes for quasi-static and dynamic fracture phase-field model. Computational Materials Science, 2016, 121: 35–47
Msekh M A, Silani M, Jamshidian M, Areias P, Zhuang X, Zi G, He P, Rabczuk T. Predictions of J integral and tensile strength of clay/epoxy nanocomposites material using phase field model. Composites. Part B, Engineering, 2016, 93: 97–114
Msekh M A, Sargado J M, Jamshidian M, Areias P M, Rabczuk T. Abaqus implementation of phase-field model for brittle fracture. Computational Materials Science, 2015, 96: 472–484
Hamdia K M, Msekh M A, Silani M, Vu-Bac N, Zhuang X, Nguyen-Thoi T, Rabczuk T. Uncertainty quantification of the fracture properties of polymeric nanocomposites based on phase field modeling. Composite Structures, 2015, 133: 1177–1190
Johnson G R, Holmquist T J. A Computational Constitutive Model for Brittle Materials Subjected to Large Strains, High Strain Rates and High Pressures. New York: Marcel Dekker Inc., 1992
Rosenberg Z. On the relation between the hugoniot elastic limit and the yield strength of brittle materials. Journal of Applied Physics, 1993, 74(1): 752–753
Johnson G R, Cook W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Engineering Fracture Mechanics, 1985, 21(1): 31–48
Ãrvik T B, Hopperstad O S, Berstad T, Langseth M. Numerical simulation of plugging failure in ballistic penetration. International Journal of Solids and Structures, 2001, 38(34): 6241–6264
Wu H, Fang Q, Peng Y, Gong Z M, Kong X Z. Hard projectile perforation on the monolithic and segmented RC panels with a rear steel liner. International Journal of Impact Engineering, 2015, 76: 232–250
Acknowledgments
The first author would like to acknowledge the Deutscher Akademischer Austauschdienst (DAAD) for the financial support of this work. The first author dedicates this work to the memory of his coworker Dr. Kheira Ouzaa. The second author would like to acknowledge the RISTEK-DIKTI (Directorate General of Resources for Science, Technology and Higher Education. Ministry of Research, Technology and Higher Education of Indonesia) under funding agreement No. 153.39/E4.4/2014.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Oucif, C., Mauludin, L.M. & Abed, F. Ballistic behavior of plain and reinforced concrete slabs under high velocity impact. Front. Struct. Civ. Eng. 14, 299–310 (2020). https://doi.org/10.1007/s11709-019-0588-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-019-0588-5