Abstract
Pastes based on copper (Cu) nanoparticles (NPs) are promising electronic-packaging materials for the attachment of high-power devices. However, the rapid oxidation of nanostructured Cu requires the use of reducing agents during processing, which makes it less suitable for attaching large-area dies (> 4 mm2). Recently, the functionalization of Cu-NP surfaces with a mixture of amines prevented oxidation, allowing for sintering without the need for reducing agents. Here we investigate the sintering mechanisms involved during die attachment using pastes of passivated Cu NPs, with particular focus on the critical role of the carrier solvents. Using 1-nonanol or 1-decanol as solvents, we first demonstrate the absence of Cu-oxide phases in the pastes after fabrication and the stability of the resulting nanostructured copper for as much as 30 min in air. By measuring the evolution of the electrical characteristics of the paste during drying and sintering, we show that electrically conductive agglomerates form among the NPs between 141°C and 144°C, independent of the carrier solvent used. The carrier solvent was found to affect mainly the densification temperature of the copper agglomerates. Because they lead to uniform sintering of the material, Cu pastes based on solvents with a low boiling point and high vapor pressure are preferable for attaching dies with area greater than 25 mm2. We show that dies with an area as large as 100 mm2 can be attached using a Cu paste based on 1-nonanol. These pastes enables the formation of temperature-resistant bonding for high-power devices using a simple and cost-effective approach.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Nelson, The Physics of Solar Cells (London: Imperial College Press, 2003).
Y. Mikamura, K. Hiratsuka, T. Tsuno, H. Michikoshi, S. Tanaka, T. Masuda, K. Wada, T. Horii, J. Genba, and T. Hiyoshi, IEEE Trans. Electron Devices 62, 382 (2015).
P. Neudeck, R. Okojie, and L. Chen, Proc. IEEE 90, 1065 (2002).
L. Lorenz, T. Erlbacher, O. Hilt, and K. Suganuma, Woodhead Publishing Series in Electronic and Optical Materials (Cambridge: Woodhead Publishing, 2018), pp. 3–53.
V.R. Manikam and K.Y. Cheong, IEEE Trans. Comp. Packag. Manuf. Technol. 1, 457 (2011).
K. Suganuma, Woodhead Publishing Series in Electronic and Optical Materials (Cambridge: Woodhead Publishing, 2018), pp. 57–80.
European Commission. Directive 2011/65/EU of The European Parliament and of the Council of 8 June 2011—ROHS, vol. 54, pp. 88–110 (2011).
K. Suganuma, S.J. Kim, and K.S. Kim, JOM 61, 64–71 (2009).
J.G. Bai, J. Yin, Z. Zhang, G.Q. Lu, and J.D. van Wyk, IEEE Trans. Adv. Packag. 30, 506–510 (2007).
T. Wang, X. Chen, G.Q. Lu, and G.Y. Lei, J. Electron. Mater. 36, 1333 (2007).
R. Khazaka, L. Mendizabal, and D. Henry, J. Electron. Mater. 43, 2459 (2014).
M. Gutierrez, N. Wang, M.K. Samani, L. Ye, and J. Liu, in IMAPS Nordic Conference on Microelectronics Packaging (NordPac), p. 151 (2017).
S. Magdassi, M. Grouchko, and A. Kamyshny, Materials (Basel) 3, 4626 (2010).
W. Li, L. Li, Y. Gao, D. Hu, C.F. Li, H. Zhang, J. Jiu, S. Nagao, and K. Suganuma, J. Alloys Compd. 732, 240 (2018).
S. Sun, Q. Guo, H. Chen, M. Li, and C. Wang, Microelectron. Reliab. 80, 2018 (2017).
L. Del Carro, J. Zuercher, S. Gerke, T. Wildsmith, G. Ramos, and T. Brunschwiler, in 2017 IEEE 67th Electronic Components and Technology Conference (ECTC). IEEE, p. 961 (2017).
J. Zurcher, L. Del Carro, G. Schlottig, D.N. Wright, A.S.B. Vardoy, M.M.V. Taklo, T. Mills, U. Zschenderlein, B. Wunderle, and T. Brunschwiler, in IEEE 66th Electronic Components and Technology Conference (ECTC), p. 343 (2016).
J. Liu, H. Chen, H. Ji, and M. Li, ACS Appl. Mater. Interfaces 8, 33289 (2016).
A.A. Zinn, R.M. Stoltenberg, J. Chang, Y.L. Tseng, and S.M. Clark, in 16th International Conference on Nanotechnology-IEEE NANO, p. 367 (2016).
B.H. Lee, M.Z. Ng, A.A. Zinn, and C.L. Gan, in Proceedings of the International Symposium on the Physical and Failure Analysis of Integrated Circuits, IPFA, p. 102 (2015).
A.A. Zinn, R.M. Stoltenberg, J. Chang, Y.L. Tseng, S.M. Clark, and D.A.A. Cullen, in 2016 IEEE 18th Electronics Packaging Technology Conference (EPTC) p 1 (2016).
M. Kanzaki, Y. Kawaguchi, H. Kawasaki, ACS Appl. Mater. Interfaces 9, 20852 (2017).
B.H. Lee, M.Z. Ng, A.A. Zinn, and C.L. Gan, in Proceedings of the Electronic Packaging Technology Conference, EPTC (2016).
A. Zinn, Lead Solder-Free Electronic (2009). https://patents.google.com/patent/US8105414B2/en.
K. Schnabl, L. Wentlent, K. Mootoo, S. Khasawneh, A.A. Zinn, J. Beddow, E. Hauptfleisch, D. Blass, and P. Borgesen, J. Electron. Mater. 43, 4515 (2014).
A.A. Zinn, P.P. Lu, Nanoparticle Composition and Methods of Making the Same (2013). https://patents.google.com/patent/US8486305B2/en
A.A. Zinn, Copper Nanoparticle Application Process for Low Temperature Printable, Flexible/Conformal Electronics and Antennas (2015). https://patents.google.com/patent/US9072185B2/en.
Y. Deng, A.D. Handoko, Y. Du, S. Xi, and B.S. Yeo, ACS Catal. 6, 2473 (2016).
A.D. Handoko, S. Deng, Y. Deng, A.W.F. Cheng, K.W. Chan, H.R. Tan, Y. Pan, E.S. Tok, C.H. Sow, and B.S. Yeo, Catal. Sci. Technol. 6, 269 (2016).
A. Soon, M. Todorova, B. Delley, and C. Stampfl, Phys. Rev. B 75, 125420 (2007).
L. De Los Santos Valladares, D.H. Salinas, A.B. Dominguez, D.A. Najarro, S.I. Khondaker, T. Mitrelias, C.H.W. Barnes, J.A. Aguiar, and Y. Majima, Thin Solid Films 520, 6368 (2012).
Z. Fang, Sintering of Advanced Materials (Woodhead Publishing Limited, 2010).
J. Habasaki, C. Leon, and K.L. Ngai, Dynamics of Glassy, Crystalline and Liquid Ionic Conductors, vol. 132 (Switzerland: Springer International Publishing, 2017).
A.J. Bard and L.R. Faulkner, Electrochemical Methods Fundamentals and Applications, 2nd ed. (New York: Wiley, 2001).
J.M. Montes, J.A. Rodríguez, and E.J. Herrera, Powder Metall. 46, 251 (2003).
E.J. De Souza, M. Brinkmann, C. Mohrdieck, and E. Arzt, Langmuir 24, 8813 (2008).
J. Zürcher, B.R. Burg, L. Del Carro, A.R. Studart, and T. Brunschwiler, Transp. Porous Media 125, 173 (2018).
R. Stadler, L. Del Carro, J. Zurcher, G. Schlottig, A.R. Studart, and T. Brunschwiler, in 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). IEEE, p. 167 (2017).
T. Sugiyama, M. Kanzaki, R. Arakawa, and H. Kawasaki, J. Mater. Sci. Mater. Electron. 27, 7540 (2016).
C. Kim, G. Lee, C. Rhee, and M. Lee, Nanoscale 7, 6627 (2015).
F.F. Lange, J. Am. Ceram. Soc. 67, 83 (1984).
Z.Z. Fang, H. Wang, X. Wang, and V. Kumar, Ceram. Trans. 209, 389 (2010).
J.R. Groza, Nanostructured Mater. 12, 987 (1999).
R.H.R. Castro, Sintering: Mechanisms of Convertion Nanodensification and Field Assisted Processes (Berlin, Heidelberg: Springer-Verlag, 2013).
S.K. Volkman, S. Yin, T. Bakhishev, K. Puntambekar, V. Subramanian, and M.F. Toney, Chem. Mater. 23, 4634 (2011).
M. Zenou, O. Ermak, A. Saar, and Z. Kotler, J. Phys. D Appl. Phys. 47, 025501 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic Supplementary Material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Del Carro, L., Zinn, A.A., Ruch, P. et al. Oxide-Free Copper Pastes for the Attachment of Large-Area Power Devices. J. Electron. Mater. 48, 6823–6834 (2019). https://doi.org/10.1007/s11664-019-07452-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-019-07452-8