Abstract
Plasma etching is a powerful technique for transferring high-resolution lithographic patterns into HgCdTe material with low etch-induced damage, and it is important for fabricating small-pixel-size HgCdTe infrared focal plane array (IRFPA) detectors. P- to n-type conversion is known to occur during plasma etching of vacancy-doped HgCdTe; however, it is usually unwanted and its removal requires extra steps. Etching at cryogenic temperatures can reduce the etch-induced type conversion depth in HgCdTe via the electrical damage mechanism. Laser beam-induced current (LBIC) is a nondestructive photoelectric characterization technique which can provide information regarding the vertical and lateral electrical field distribution, such as defects and p–n junctions. In this work, inductively coupled plasma (ICP) etching of HgCdTe was implemented at cryogenic temperatures. For an Ar/CH4 (30:1 in SCCM) plasma with ICP input power of 1000 W and RF-coupled DC bias of ∼ 25 V, a HgCdTe sample was dry-etched at 123 K for 5 min using ICP. The sample was then processed to remove a thin layer of the plasma-etched region while maintaining a ladder-like damaged layer by continuously controlling the wet chemical etching time. Combining the ladder etching method and LBIC measurement, the ICP etching-induced electrical damage depth was measured and estimated to be about 20 nm. The results indicate that ICP etching at cryogenic temperatures can significantly suppress plasma etching-induced electrical damage, which is beneficial for defining HgCdTe mesa arrays.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. Rogalski, J. Antoszewski, and L. Faraone, J. Appl. Phys. 105, 4 (2009).
JTM Wotherspoon, U.K. Patent No. GB2095898 (1981).
M.V. Blackman, D.E. Charlton, M.D. Jenner, D.R. Purdy, J.T.M. Wotherspoon, C.T. Elliott, and A.M. White, Electron. Lett. 23, 978 (1987).
V. Srivastav, R. Pal, and H.P. Vyas, Opto-Electron. Rev. 13, 197 (2005).
C.R. Eddy, E.A. Dobisz, J.R. Meyer, and C.A. Hoffman, J. Vac. Sci. Technol. A 11, 1763 (1993).
A.J. Stoltz, J.D. Benson, P.R. Boyd, M. Martinka, J.B. Varesi, A.W. Kaleczyc, E.P.G. Smith, S.M. Johnson, W.A. Radford, and J.H. Dinan, J. Electron. Mater. 32, 692 (2003).
E. Laffosse, J. Baylet, J.P. Chamonal, G. Destefanis, G. Cartry, and C. Cardinaud, J. Electron. Mater. 34, 740 (2005).
E.P.G. Smith, J.K. Gleason, L.T. Pham, E.A. Patten, and M.S. Welkowsky, J. Electron. Mater. 32, 816 (2003).
A.J. Stoltz, J.D. Benson, and P.J. Smith, J. Electron. Mater. 37, 1225 (2008).
E. Belas, J. Franc, A. Toth, P. Moravec, R. Grill, H. Sitter, and P. Höschl, Semicond. Sci. Technol. 11, 1116 (1996).
E.P.G. Smith, J.F. Siliquini, C.A. Musca, J. Antoszewski, J.M. Dell, L. Faraone, and J. Piotrowski, J. Appl. Phys. 83, 5555 (1998).
A. Gaucher, J. Baylet, J. Rothman, E. Martinez, and C. Cardinaud, J. Electron. Mater. 42, 3006 (2013).
E. Belas, R. Grill, J. Franc, A. Toth, P. Hoschl, H. Sitter, and P. Moravec, J. Cryst. Growth 159, 1117 (1996).
J. Bajaj, L.O. Bubulac, P.R. Newman, W.E. Tennant, and P.M. Raccah, J. Vac. Sci. Technol. A 5, 3186 (1987).
W.C. Qiu, X.A. Cheng, R. Wang, Z.J. Xu, and T. Jiang, J. Appl. Phys. 115, 204506 (2014).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Liu, L.F., Chen, Y.Y., Ye, Z.H. et al. Inductively Coupled Plasma-Induced Electrical Damage on HgCdTe Etched Surface at Cryogenic Temperatures. J. Electron. Mater. 47, 5759–5762 (2018). https://doi.org/10.1007/s11664-018-6172-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-018-6172-2