Abstract
Thermal oxidation of 150-nm sputtered pure samarium metal film on silicon substrate has been carried out in oxygen ambient at various temperatures (600°C to 900°C) for 15 min and the effect of the oxidation temperature on the structural, chemical, and electrical properties of the resulting Sm2O3 layers investigated. The crystallinity of the Sm2O3 films and the existence of an interfacial layer were evaluated by x-ray diffraction (XRD) analysis, Fourier-transform infrared (FTIR) spectroscopy, and Raman analysis. The crystallite size and microstrain of Sm2O3 were estimated by Williamson–Hall (W–H) plot analysis, with comparison of the former with the crystallite size of Sm2O3 as calculated using the Scherrer equation. High-resolution transmission electron microscopy (HRTEM) with energy-dispersive x-ray (EDX) spectroscopy analysis was carried out to investigate the cross-sectional morphology and chemical distribution of selected regions. The activation energy or growth rate of each stacked layer was calculated from Arrhenius plots. The surface roughness and topography of the Sm2O3 layers were examined by atomic force microscopy (AFM) analysis. A physical model based on semipolycrystalline nature of the interfacial layer is suggested and explained. Results supporting such a model were obtained by FTIR, XRD, Raman, EDX, and HRTEM analyses. Electrical characterization revealed that oxidation temperature at 700°C yielded the highest breakdown voltage, lowest leakage current density, and highest barrier height value.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J.B. Casady and R.W. Johnson, Solid-State Electron. 39, 1409 (1996).
A. Elford and P.A. Mawby, Microelectron. J. 30, 527 (1999).
P.R. Chalker, Thin Solid Films 343, 616 (1999).
Y.H. Wong and K.Y. Cheong, J. Mater Sci-Mater. El. 21, 980 (2010).
S.I. Ohmi, C. Kobayashi, K. Aizawa, S.I. Yamamoto, E. Tokumitsu, H. Ishiwara, and H. Iwai, in 31st European Solid-State Device Research Conference, ESSDERC (2001) 235.
H.D. Kim and Y. Roh, J. Korean Phys. Soc. 49, 755 (2006).
V.V. Atuchin, V.N. Kruchinin, Y.H. Wong, and K.Y. Cheong, Mater. Lett. 105, 72 (2013).
Y.H. Wong and K.Y. Cheong, Ceram. Int. 39, 475 (2013).
Y.H. Wong and K.Y. Cheong, Mater. Chem. Phys. 136, 624 (2012).
Y.H. Wong and K.Y. Cheong, J. Electrochem. Soc. 159, 293 (2012).
Y.H. Wong and K.Y. Cheong, Thin Solid Films 520, 6822 (2012).
Y.H. Wong and K.Y. Cheong, J. Alloy. Compd. 509, 8728 (2011).
C.C. Chew, M.S. Gorji, K.H. Goh, C.G. Tan, S. Ramesh, and Y.H. Wong, Appl. Phys. A-Mater. 122, 66 (2016).
L. Shi, Y. Yuan, X.F. Liang, Y.D. Xia, J. Yin, and Z.G. Liu, Appl. Surf. Sci. 253, 3731 (2007).
J. Paivasaari, M. Putkonen, and L. Niinisto, Thin Solid Films 472, 275 (2005).
S.J. Jo, J.S. Ha, N.K. Park, D.K. Kang, and B.H. Kim, Thin Solid Films 513, 253 (2006).
G.D. Wilk, R.M. Wallace, and J.M. Anthony, J. Appl. Phys. 89, 5243 (2001).
M. Houssa, L. Pantisano, L.A. Ragnarsson, R. Degraeve, T. Schram, G. Pourtois, S. De Gendt, G. Groeseneken, and M.M. Heyns, Mater. Sci. Eng. R 51, 37 (2006).
T.M. Pan, W.T. Chang, and F.C. Chiu, Appl. Surf. Sci. 257, 3964 (2011).
W.C. Chin, K.Y. Cheong, and Z. Hassan, Mater. Sci. Semicond. Proc. 13, 303 (2010).
K.H. Goh, A.S.M.A. Haseeb, and Y.H. Wong, Thin Solid Films 606, 80 (2016).
T.M. Pan and C.C. Huang, Appl. Surf. Sci. 256, 7186 (2010).
F.H. Chen, M.N. Hung, J.F. Yang, S.Y. Kuo, J.L. Her, Y.H. Matsuda, and T.M. Pan, J Phys. Chem. Solids 74, 570 (2013).
C.H. Kao, H. Chen, K.S. Chen, C.Y. Huang, C.H. Huang, J.C. Ou, C.J. Lin, K.M. Lin, L.T. Kuo, in 10th IEEE International Conference on Solid-State and Integrated Circuit Technology Proceedings (2010) p. 1425.
X.Y. Zhao, X.L. Wang, H. Lin, and Z.Q. Wang, Phys. B 403, 1787 (2008).
K. Shalini and S.A. Shivashankar, Bull. Mater. Sci. 28, 49 (2005).
C. Constantinescu, V. Ion, A.C. Galca, and M. Dinescu, Thin Solid Films 520, 6393 (2012).
A.A. Dakhel, J. Alloy. Compd. 365, 233 (2004).
V.A. Rozhkov, A.Y. Trusova, and I.G. Berezhnoy, Thin Solid Films 325, 151 (1998).
V.A. Rozhkov, V.P. Goncharov, A.Y. Trusova, in Proceedings of the 1995 IEEE 5th International Conference on Conduction and Breakdown in Solid Dielectrics (1995) p. 552.
S.Y. Huang, T.C. Chang, M.C. Chen, S.C. Chen, H.P. Lo, H.C. Huang, D.S. Gan, S.M. Sze, and M.J. Tsai, Solid-State Electron. 63, 189 (2011).
S. Kaya, E. Yilmaz, A. Kahraman, and H. Karacali, Nucl. Instrum. Meth. B 358, 188 (2015).
A.A. Dakhel, J. Alloy. Compd. 422, 1 (2006).
X.H. Cheng, D.P. Xu, Z.R. Song, D.W. He, Y.H. Yu, Q.T. Zhao, and D.S. Shen, Appl. Surf. Sci. 256, 921 (2009).
Y.P. Wu, S.F. Zhu, T.W. Liu, F.F. Li, Y.Z. Zhang, Y.C. Rao, and Y.B. Zhang, Appl. Surf. Sci. 307, 615 (2014).
M.A. Pampillon, P.C. Feijoo, E.S. Andres, M.L. Lucia, A. del Prado, and M. Toledano-Luque, Microelectron. Eng. 88, 2991 (2011).
K. Venkateswarlu, A.C. Bose, and N. Rameshbabu, Phys. B 405, 4256 (2010).
K. Santra, P. Chatterjee, and S.P. Sen Gupta. Bull. Mater. Sci. 25, 251 (2002).
S. Vives, E. Gaffet, and C. Meunier, Mater. Sci. Eng. A-Str. 366, 229 (2004).
V.D. Mote, Y. Purushotham, and B.N. Dole, Cryst. Res. Technol. 46, 705 (2011).
E.J. Mittemeijer and U. Welzel, Z. Kristallogr. 223, 552 (2008).
M. Herrmann, U. Forter-Barth, P.B. Kempa, and H. Krober, Chem. Eng. Technol. 32, 1067 (2009).
A.K. Zak, W.H.A. Majid, M.E. Abrishami, and R. Yousefi, Solid State Sci. 13, 251 (2011).
S. Miyazaki, Appl. Surf. Sci. 190, 66 (2002).
G.A.M. Hussein, D.J. Buttrey, P. DeSanto, A.A. Abd-Elgaber, H. Roshdy, and A.Y.Z. Myhoub, Thermochim. Acta 402, 27 (2003).
M.A. Ruiz-Gomez, C. Gomez-Solis, M.E. Zarazua-Morin, L.M. Tones-Martinez, I. Juarez-Ramirez, D. Sanchez-Martinez, and M.Z. Figueroa-Torres, Ceram. Int. 40, 1893 (2014).
H.M. Ismail, Colloids Surfaces A 97, 247 (1995).
E. Kusrini, R. Arbianti, N. Sofyan, M.A.A. Abdullah, and F. Andriani, Spectrochim. Acta A 120, 77 (2014).
S. Jiang, J. Liu, C.L. Lin, X.D. Li, and Y.C. Li, J. Appl. Phys. 113, 113502 (2013).
J. Mandal, B.J. Sarkar, A.K. Deb, and P.K. Chakrabarti, J. Magn. Magn. Mater. 371, 35 (2014).
T. Hongo, K.I. Kondo, K.G. Nakamura, and T. Atou, J. Mater. Sci. 42, 2582 (2007).
X.Y. Zhao, X.L. Wang, H. Lin, and Z.Q. Wang, Mater. Sci. Semicond. Proc. 33, 42 (2015).
Acknowledgements
This project is funded by University of Malaya Research Grant (UMRG) Nos. RP013D-13AET and RP024A-13AET, Fundamental Research Grant Scheme (FRGS) Grant No. FP010-2013B, and Postgraduate Research Grant (PPP) No. PG048-2014A. The authors would also like to acknowledge the Faculty of Engineering and Faculty of Science, University of Malaya for providing the facilities and resources necessary for this research.
Authors’ contributions
K.H.G. was involved in experimental design, data acquisition, data interpretation and analysis, and drafting and revision of the manuscript. Y.H.W. and A.S.M.A.H. were involved in revising the manuscript critically for important intellectual content and gave final approval for the version submitted for publication.
Conflict of interest
The authors declare that they have no competing interests.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Goh, K.H., Haseeb, A.S.M.A. & Wong, Y.H. Effect of Oxidation Temperature on Physical and Electrical Properties of Sm2O3 Thin-Film Gate Oxide on Si Substrate. J. Electron. Mater. 45, 5302–5312 (2016). https://doi.org/10.1007/s11664-016-4694-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-016-4694-z