Abstract
Shales are a major sink for K into seawater delivered from continental weathering, and are potential recorders of K cycling. High precision K isotope analyses reveal a > 0.6 ‰ variation in δ41K values (41K/39K relative to NIST SRM 3141a) from a set of well characterized post-Archean Australian shale (PAAS) samples. By contrast, loess samples have relatively homogenous δ41K values (− 0.5 ± 0.1 ‰), which may represent the average K composition of upper continental crust. Most of the shales analyzed in this study have experienced K enrichment relative to average continental crust, and the majority of them define a trend of decreasing δ41K value (from − 0.5 to − 0.7 ‰) with increasing K content and K/Na ratio, indicating cation exchange in clays minerals is accompanied by K isotope fractionation. Several shale samples do not follow the trend and have elevated δ41K values up to − 0.1 ‰, and these samples are characterized by variable Fe isotope compositions, which reflect post-depositional processes. The K isotope variability observed in shales, in combination with recent findings about K isotope fractionation during continental weathering, indicates that K isotopes fractionate during cycling of K between different reservoirs, and K isotopes in sediments may be used to trace geological cycling of K.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
Potassium (K) is a major constituent in Earth’s mantle (190–260 ppm; Palme and O’Neill 2014), crust (2.3 wt%; Rudnick and Gao 2003), river waters (0.2–20 ppm; Meybeck 2003), and seawater (399 ppm). During its global cycling, K is added into oceans via riverine runoff and mid-ocean ridge (MOR) hydrothermal fluxes (Elderfield and Schultz 1996a; Garrels and Mackenzie 1971). The influx of K in seawater is balanced by K removal by chemical exchange involving clays in sediments, and low temperature basalt alteration (Bloch and Bischoff 1979; Kronberg 1985). The K influx is affected by the relative intensity of continental weathering and mid-ocean ridge activities. Changes in the relative intensity of continental weathering and MOR activities have been suggested to account for the changes in seawater chemistry, and the shifting between “calcite sea” and “aragonite sea” in the Phanerozoic (Hardie 1996). In addition, either changes in mid-ocean ridge spreading rate (Berner et al. 1983) or changes in erosion due to mountain uplift (Raymo and Ruddiman 1992) have been suggested to be the primary driving force for variations in atmospheric CO2 level, a topic that has been hotly debated for decades. Understanding of the relative intensity of continental weathering and mid-ocean ridge activities from a perspective of K cycling, therefore, may provide insights into the fundamental questions about secular changes in ocean chemistry and sediment mineralogy, as well as atmospheric CO2 levels in geological history.
Potassium has three naturally occurring isotopes, which are 39K (93.258%), 40K (0.012%, radioactive, half-life 1.248 billion years), and 41K (6.730%). The precisions of 41K/39K ratio measurements in earlier studies using TIMS and SIMS techniques were not sufficient to resolve the sub per mil level K isotope differences between most terrestrial samples (Humayun and Clayton 1995). Recently, advances in multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) has led to significant improvements in precision of 41K/39K ratio measurements (Li et al. 2016; Morgan et al. 2018; Wang and Jacobsen2016). Indeed, the 41K/39K ratio can be can be routinely measured to a precision of better than 0.1 ‰ (Chen et al. 2019; Hu et al. 2018; Xu et al. 2019). Subsequently, significant K isotope fractionation effects have been observed during biological processes (Li 2017), K-salts precipitation (Li et al. 2017), and continental weathering (Li et al. 2019). One of the remarkable discoveries with the improved analytical precision is that modern seawater has a 41K/39K ratio that is about 0.6 ‰ higher than igneous rocks (Li et al. 2016; Wang and Jacobsen 2016). The cause of such isotopic contrast, however, is not known yet. Here we report new K isotope data for a range of well-characterized loess and shale samples to better understand the origin of the K isotope difference between seawater and igneous rocks, and to explore the potential of K isotope geochemistry for tracing global K cycling.
2 Materials and methods
2.1 Samples and preparation
Most of the shale and loess samples analyzed in this study were originally collected to characterize the composition of upper continental crust (Nance and Taylor 1976; Taylor et al. 1983). Specifically, the shale samples were used to define the post Archean Australian shale (PAAS) composite for rare earth element concentrations. All of the shale samples are from areas of unmetamorphosed regions extending back into the Proterozoic, and these samples are from deep drill cores and thus were not subject to surface weathering and leaching like samples from outcrops (Nance and Taylor 1976). Also analyzed were three USGS rock standards that included modern marine mud (MAG-1) and two shales (SCo-1 and SGR-1; Flanagan 1976). Loess samples analyzed in this study are from Germany, New Zealand and United States, which were originally collected and studied by Taylor et al. (1983). Detailed Fe isotope analyses by Beard et al. (2003) have been reported on these shale and loess samples, and these results are used to aid in interpreting the K isotope data. Chemical and Fe isotope compositions of the loess and shale samples are provided in Table 1.
Sample preparation was undertaken at Nanjing University, where all chemical procedures were performed in a clean room (class 1000) with laminar flow hoods (class 100) and HEPA filtered air. Deionized (18.2 MΩ) water, Teflon-coated hot plates, Teflon beakers, double distilled reagents were used throughout the experiments; other labwares, such as centrifuge tubes and pipette tips, were soaked in 6 M HCl overnight and rinsed using deionized water before usage. Silicate powders were dissolved using a standard HF-HNO3 digestion procedure at 130 °C. An aliquot of the dissolved sample, which typically contained 50–200 μg of K, was converted into nitrate salts by repeatedly drying and re-dissolution in 50–100 μL concentrated HNO3. The sample was subsequently dried and dissolved in 0.5 mL 1.5 M HNO3, and ready for chemical purification using ion exchange chromatography.
Separation of K from matrix elements followed a two-stage ion exchange protocol that has been described in Li et al. (2016). A dissolved sample was firstly loaded on to a first-stage column that contained 1 mL wet volume (in deionized water, gravity packing) of 100–200 mesh BioRad® AG50W-x12 resin and eluted using 1.5 M HNO3. Effective separation of K from Na, Al and Ca was achieved using the first stage column, but a proportion of Ti and all of Mg was also collected with K. The K-bearing solution collected from the first stage column was dried and re-dissolved in a weak HNO3-HF acid that contained 0.2 M HNO3 and 0.05 M HF, and loaded onto the second stage column that contained 0.4 mL wet volume of 100–200 mesh BioRad® AG50 W-x8 resin, and was pre-conditioned with the weak HNO3-HF acid. Ti4+ form ion-complex with F− and was effectively washed off the cation exchange resin during elution with the weak HNO3-HF acid. Following that, a 0.5 M HNO3 was used to effectively separate K from Mg and the remaining vestiges of Na (Li et al. 2016). Such two-stage column procedure balances between versatility, quality of separation, robustness, acid consumption, and efficiency for chemical purification of K. Potassium recovery of the method was 99.4 ± 2.1 ‰ (2SD, n = 54), and the total procedural blank of K was 3–8 ng (n = 5), which is negligible compared with the > 50 μg mass of K in samples.
2.2 Mass spectrometry
41K/39K isotope ratio measurements were performed on a Micromass IsoProbe MC-ICP-MS at the University of Wisconsin-Madison, using instrument settings that have been detailed in Li et al. (2016). The IsoProbe MC-ICP-MS was run with a standard 1350 W forward RF power, using high purity He (flow rate: 10 mL/min) as the collision gas and high purity D2 (flow rate: 6 mL/min) as the reaction gas. Argon hydride (ArH+), the most outstanding issue for high precision 41K/39K ratio measurement using MC-ICP-MS, was near quantitatively suppressed via proton transfer and atom transfer reactions with D2 in the collision cell (Li et al. 2016). Potassium solutions were introduced into the plasma using a self-aspirating Glass Expansion Micromist nebulizer with an uptake rate of ~ 0.1 mL/min and a Glass Expansion Cyclonic spray chamber cooled to 5 °C using a water jacket. Typical sensitivity for 1 ppm K solution under standard mass resolution (~ 400 resolving power) was 7–11 V on 39K and 0.6–1 V on 41K. It should be noted that in the analytical session for most of samples reported in this study, weak interferences on 41K and 39K were identified during mass scan of blank acid. The mass of these interferences were 0.06–0.08 atomic mass units (AMU) heavier than 39K and 41K, respectively. These interferences cannot be removed using collision cell, therefore the defining slit for the ion beam was narrowed down to about 25% transmission (> 1000 resolving power), to fully resolve these interferences from K isotopes in the mass spectrum. Subsequently, instrument sensitivity was reduced to 1.5–2 V on 39K.
A standard-sample-standard bracketing routine was applied for K isotope ratio measurement, against a 1 ppm or 5 ppm in-house K stock solution (UW-K), depending on if the defining slit was narrowed to avoid isobars. Sample solutions were diluted to match the concentration of standard solution to better than ± 10%. A 60 s on-peak acid blank was measured prior to each isotopic analysis of K solution, and was subtracted from the analyte signal. Each K isotopic analysis consisted forty 5 s integrations.
2.3 Data reporting, precision, and accuracy
Potassium isotope compositions are reported using the standard per mil (‰) notation of δ41K for a 41K/39K ratio, where δ41K = [(41K/39Ksample)/(41K/39Kstandard) − 1] × 1000. All K isotope data are reported relative to international K standard NIST SRM 3141a. The in-house K stock solution (UW-K) has a δ41K value of − 0.12 ± 0.03 ‰ (2 standard error, or 2SE, n = 43) relative to NIST SRM 3141a. Internal precision for 41K/39K ratio measurement of the method was better than ± 0.07 ‰ (2SE), mostly better than ± 0.04 ‰ (2SE). Accuracy of the method was checked by analyzing pure NIST 3141a K and synthetic samples that were treated as samples using the two-stage ion exchange columns. The synthetic samples were made by mixing UW-K solution with matrix elements separated from different natural samples during ion exchange column chemistry. The measured δ41K values for five processed NIST 3141a K cluster around 0 ‰ (− 0.03 ± 0.13 ‰, 2SD, n = 5), and the measured δ41K values for seven synthetic samples that were doped with UW-K cluster around − 0.12 ‰ (− 0.10 ± 0.08 ‰, 2SD, n = 7) (Li et al. 2016). Narrowing of defining slit of MC-ICP-MS did not affect accuracy of K isotope analysis, as the measured seawater δ41K value using narrow slit and 5 ppm solution was 0.04 ± 0.01 ‰ (2SD, n = 2), which is consistent with δ41K value of 0.06 ± 0.10 ‰ (2SD, n = 3) reported in Li et al. (2016) that used a standard slit and 1 ppm K solution.
3 Results
The measured K isotope compositions for the shale and loess samples are plotted in Fig. 1 and tabulated in Table 1. Overall there is a 0.6 ‰ variability in δ41K values within sedimentary samples. The δ41K values of six loess samples from North America and Western Europe vary between − 0.48 and − 0.43 ‰, whereas δ41K values of five loess from New Zealand are slightly more negative and vary between − 0.58 and − 0.54 ‰. Two USGS standards, the Cretaceous Cody Shale (SCo-1) and modern marine mud (MAG-1), have δ41K values of − 0.41 ‰ and − 0.57 ‰ respectively (Fig. 1, Table 1). The twenty-three post-Archean Australian shales that have been analyzed have δ41K values that vary from − 0.69 to − 0.08 ‰. The 9 samples from the Mt Isa Group shale and the Canning and Perth basins all have δ41K that are within 0.15 ‰ of igneous rocks. In contrast the State Circle Shale and Amadeus Basin shale samples have δ41K values that are typically more than 0.15 ‰ different than igneous rocks. The Silurian State Circle shales all have lower δ41K values that range from − 0.69 to − 0.63 ‰. Four shale samples from the Amadeus Basin have that range from − 0.61 to − 0.65 ‰ and two other samples have anomalously high δ41K values of − 0.34 and − 0.08 ‰ (Fig. 1, Table 1).
4 Discussions
4.1 K isotope baseline of the upper continental crust
The K isotope composition for the Bulk Silicate Earth value was first proposed by Wang and Jacobsen (2016), based on analyses of basalts from different localities and tectonic settings. However, subsequent studies have revealed that considerable K isotope variability exist in upper continental rocks, particularly in the evolved, felsic rocks (Chen et al. 2019; Morgan et al. 2018; Xu et al. 2019). For the purpose of understanding global K cycling, it is necessary to estimate the average K isotope composition of upper continental crust, which is an important source of K in seawater. Loess is derived from physical abrasion in a cold climate of typically upper continental crustal material coupled with Aeolian deposition (Taylor et al. 1983), therefore the amount of chemical weathering these sediments have experienced would be limited. Indeed, cross plots of K content versus contents of immobile elements Al and Ti (Fig. 2a, b) show that the loess samples did not experience unequivocal K addition or loss, therefore the possible K isotope fractionation associated with loess formation would be insignificant, and it is possible to infer the average K isotope composition of upper continental crust from loess. The loess samples analyzed in this study have relative uniform K isotope compositions that cluster around − 0.5 ‰, close to the Bulk Silicate Earth value (− 0.48 ‰) proposed by Wang and Jacobsen (2016) (Fig. 1; Table 1). Such consistency implies that, K was enriched in crust during Earth’s differentiation without a distinguishable overall K isotope fractionation between mantle rocks and melts. Further, although seawater is an important geological reservoir and has a K isotope composition distinct from the igneous rocks (Li et al. 2016; Wang and Jacobsen 2016), the mass of K in seawater (~ 5.6 × 1020 g) is too small compared to that in Earth’s continental crust (~ 3.5 × 1023 g) to shift the isotopic mass balance to a significant degree. Based on the measured K isotope compositions of loess, a δ41K value of − 0.5 ± 0.1 ‰ is proposed as the δ41K baseline for average continental crust, the source material of shales that are discussed below.
4.2 K isotope fractionation recorded in shales
In contrast to the limited K isotope variability in loess, the K isotope composition of shales varies over a 0.6 ‰ range in δ41K values (Fig. 1; Table 1). This range in K isotope compositions is correlated to K addition for many samples. For example, cross plots of K content versus immobile element concentration of Al and Ti show that the majority of shale samples have experienced K addition by over 50% of the original contents (Fig. 2a, b). Because the particulate precursor of shales is depleted in K (Amundson 2004; Viers et al. 2009), a K enrichment process must have occurred in sedimentary basins during and after deposition, through interaction between the shale precursor with seawater and pore fluids in the sediment. A large proportion of the shales display a negative correlation between δ41K values and K2O concentration (Fig. 2d), that is interpreted to reflect addition or incorporation of K with a low 41K/39K ratio during deposition and post-depositional processes. Enrichment of K is mirrored by Na depletion in shales (Fig. 2c), and the δ41K values of a large proportion of the shales decrease with increasing K/Na ratios (Fig. 2e). These facts suggest that the K isotope fractionation process may be accompanied by either K–Na exchange in existing clay minerals, or neoformation of K-rich minerals (e.g., illite) at the expense of dissolution of Na-silicates (e.g., albite).
In the cross plots of δ41K versus K, K/Na and K/Al (Fig. 2d, e), a few samples do not follow the negatively-correlated trend defined by the majority of the shales. Iron isotopes provide hints about the origin of shale with elevated δ41K values. The shale sample (A012 of Amadeous Basin Shale, Table 1) with the highest δ41K value has the highest δ56Fe value among the shales (Fig. 2f), and another the Amadeous Basin Shale sample with a more typical shale K isotope compositions has one of the lowest δ56Fe value (− 0.28 ‰, sample AO07, Table 1) of the shales analyzed by Beard et al. (2003). Thus, the Amadeous Basin shales define a 0.6 ‰ range in Fe isotope compositions which stands in marked contrast to the Fe isotope variation (0 ± 0.1 ‰ in δ56Fe) found in modern marine sediments, river suspended materials, loess and aerosols (Beard et al. 2003). Because solubility of Fe(III) phases in oxidized aqueous conditions is extremely low (Kuma et al. 1996) and large Fe isotope fractionation is ubiquitously associated with redox processes of Fe (Johnson et al. 2008), the Fe isotope variation in Amadeous Basin Shales was likely produced via post-depositional processes in the sediments, where redox-driven Fe cycling and Fe isotope fractionation was feasible. The elevated δ41K signatures in shales may have been produced via post-depositional processes such as glauconite production. Glauconite is a K rich mica with some reduced Fe (Meunier and El Albani 2007) and production of this mineral may have changed both the Fe and K isotope composition or the sample.
4.3 K isotope response to global K cycling
Because significant K isotope fractionation occurs during silicate weathering and clay formation (Li et al. 2019), stable K isotopes offer a novel approach to quantify the relative contributions of continental weathering and mid-ocean ridge activities for the K global cycle, based on a few assumptions of chemical and isotopic steady state of seawater. As suggested in Li et al. (2019), elemental and isotopic mass balance for K in oceans can be formularized as:
where J and δ represent the K flux and K isotope compositions for riverine inputs (riv),K released from high temperature mid-ocean hydrothermal fluids (MOR), as well as K incorporated into clay minerals in sediments (clay), and K removed through low temperature alteration of basalts (alt), respectively. Combining Eqs. (1) and (2), we can derive:
Equation (3) shows that K isotope composition of clay is essentially a function of Jriv/JMOR. The other parameters in the equation can be obtained from Eqs. (1) and (2) based on modern K cycling. There have been significant uncertainties in the literature data for estimated Jriv (Berner and Berner 2012; Holland 2005; Jarrard 2003), JMOR (Holland 2005; Jarrard 2003), Jclay (Bloch and Bischoff 1979; Holland 2005; Jarrard 2003), and Jalt (Bloch and Bischoff 1979; Elderfield and Schultz 1996b; Holland 2005; Jarrard 2003; Staudigel 2014), more recently the large uncertainties in JMOR and Jclay have been remarkably reduced by Monte Carlo simulations (Li et al. 2019), and based on the average values of the Monte Carlo simulation results in Li et al. (2019), we set Jriv = 5.5 × 1013 g y−1, JMOR = 0.8 × 1013 g y−1‚ Jclay = 4.9 × 1013 g y−1, and Jalt = 1.4 × 1013 g y−1. The study of Li et al. (2019) also gave new estimates of δriv = − 0.22 ‰. Based on the study of Parendo et al. (2017), δalt is set as the modern seawater value (+ 0.1 ‰). δMOR is set as − 0.6 ‰ based on the assumption that little K isotope fractionation occurred at high temperature when hydrothermal fluid leaches K from basalts in MOR center. Using the above parameters and solving Eq. (2), δclay is calculated to be − 0.4 ‰.
Analyzing Eq. (3), we note that the term δclay–δalt is a constant (− 0.5 ‰) that reflects the difference in K isotope fractionation factor between the seawater-clay and seawater-altered basalt pairs. On the other hand, high continental weathering intensity would bring more detrital materials and Al into oceans to boost clay formation, whereas higher MOR activity would enlarge the zone of low temperature seawater-basalt interaction. Therefore, we assume that JMOR/JRiv is positively correlated with JAlt/Jclay at variable conditions:
q is set as a constant, and using the modern flux data, q is calculated to be 0.5, subsequently, Jalt/JMOR in Eq. (3) can be calculated based on this function and Eq. (1) in the discussion. Using Eqs. (3) and (4), and the parameters defined above, we can model the relation between K isotope composition of clays and the relative contribution of MOR fluids for the K influx to ocean (Fig. 3). Assuming a Δ41Ksw-clay fractionation of 0.5 ‰ between seawater and clays, the curve for seawater is also derived. We note that there are uncertainties in the parameters in Eqs. (3) and (4) that may lead to inaccuracy in modeling results. However, changes in these parameters shift the curves up and down and along the y axis but they do not change the trend and pattern of the curves. Figure 3 shows that in a scenario of little continental weathering, but dominant MOR activity, which likely occurred in early Earth and the Snowball Earth period, δ41K of seawater is essentially buffered by igneous rocks at high temperature and should be down to − 0.6 ‰. In contrast, in a scenario of dominant continental weathering but very weak MOR activity, δ41K of clays should be close to δ41K of riverine input and the δ41K of seawater should be 0.5 ‰ higher. Phanerozoic shales analyzed in this study cover a range of − 0.7 to − 0.4 ‰ in δ41K, and the increase in δ41K from − 0.7 ‰ for Silurian shales to − 0.6 ‰ for Triassic shales corresponds to a ca. 10% decrease of MOR fluids contribution to the total K influx (Fig. 3). This is consistent with the study of Hardie (1996), who calculated that the ratio between riverine input and MOR input increased by a factor of 20% from Silurian to Triassic.
5 Conclusions and implications
Significant K isotope variability has been observed in shales, and the majority of the shales follow a trend of decreasing δ41K with increasing K content, implying preferential uptake of light K isotopes into clay minerals in oceanic sediments. Global cycling of K involves continental weathering, clay formation in oceanic sediments, and hydrothermal alteration of seafloor basalts. These processes are associated with K isotope fractionation, thus K isotopes could be used to understand global K cycling. Fluxes of K in oceans involving continental weathering and mid-ocean ridge hydrothermal activities may have changed in geological histories in response to secular climate change or plate tectonics, and these may result in change in δ41K of seawater. It is possible that the changes in δ41K of seawater may be recorded in shales, and K isotope compositions of shales may hold clues for understanding the major events (e.g., melting of Snowball Earth) of global K cycling in geological history.
References
Amundson R (2004) Soil formation. In: Holland HD, Turekian KK (eds) Treatise on geochemistry, vol 5. Elsevier, Amsterdam, pp 1–35
Beard BL, Johnson CM, Von Damm KL, Poulson RL (2003) Iron isotope constraints on Fe cycling and mass balance in oxygenated Earth oceans. Geology 31:629–632
Berner EK, Berner RA (2012) Global environment: water, air, and geochemical cycles. Princeton University Press, Princeton
Berner RA, Lasaga AC, Garrels RM (1983) The carbonate-silicate geochemical cycle and its effect on atmospheric carbon dioxide over the past 100 million years. Am J Sci 283:641–683
Bloch S, Bischoff JL (1979) The effect of low-temperature alteration of basalt on the oceanic budget of potassium. Geology 7:193–196
Chen H, Tian Z, Tuller-Ross B, Korotev Randy L, Wang K (2019) High-precision potassium isotopic analysis by MC-ICP-MS: an inter-laboratory comparison and refined K atomic weight. J Anal At Spectrom 34:160–171
Elderfield H, Schultz A (1996a) Mid-ocean ridge hydrothermal fluxes and the chemical composition of the ocean. Annu Rev Earth Planet Sci 24:191–224
Elderfield H, Schultz A (1996b) Mid-ocean ridge hydrothermal fluxes and the chemical composition of the ocean. Annu Rev Earth Planet Sci 24:191–224
Flanagan FJ (1976) Descriptions and analyses of eight new USGS rock standards. U.S. Geological Survey Professional Paper 840, pp 1–192
Garrels RM, Mackenzie FT (1971) Evolution of sedimentary rocks. Norton, New York
Hardie LA (1996) Secular variation in seawater chemistry: an explanation for the coupled secular variation in the mineralogies of marine limestones and potash evaporites over the past 600 m.y. Geology 24:279–283
Holland HD (2005) Sea level, sediments and the composition of seawater. Am J Sci 305:220–239
Hu Y, Chen X-Y, Xu Y-K, Teng F-Z (2018) High-precision analysis of potassium isotopes by HR-MC-ICPMS. Chem Geol 1:1. https://doi.org/10.1016/j.chemgeo.2018.05.033
Humayun M, Clayton RN (1995) Precise determination of the isotopic composition of potassium: application to terrestrial rocks and lunar soils. Geochim Cosmochim Acta 59:2115–2130
Jarrard RD (2003) Subduction fluxes of water, carbon dioxide, chlorine, and potassium. Geochem Geophys Geosyst. https://doi.org/10.1029/2002GC000392
Johnson CM, Beard BL, Roden EE (2008) The iron isotope fingerprints of redox and biogeochemical cycling in modern and ancient earth. Annu Rev Earth Planet Sci 36:457–493
Kronberg BI (1985) Weathering dynamics and geosphere mixing with reference to the potassium cycle. Phys Earth Planet Interiors 41:125–132
Kuma K, Nishioka J, Matsunaga K (1996) Controls on iron(III) hydroxide solubility in seawater: the influence of pH and natural organic chelators. Limnol Oceanogr 41:396–407
Li W (2017) Vital effects of K isotope fractionation in organisms: observations and a hypothesis. Acta Geochim 36:374–378
Li S, Li, W, Beard BL, Raymo ME, Wang X, Chen Y, Chen J (2019) K isotopes as a tracer for continental weathering and geological K cycling. In: Proceedings of the national academy of sciences, p 201811282
Li W, Beard BL, Li S (2016) Precise measurement of stable potassium isotope ratios using a single focusing collision cell multi-collector ICP-MS. J Anal At Spectrom 31:1023–1029
Li W, Kwon KD, Li S, Beard BL (2017) Potassium isotope fractionation between K-salts and saturated aqueous solutions at room temperature: laboratory experiments and theoretical calculations. Geochim Cosmochim Acta 214:1–13
Meunier A, El Albani A (2007) The glauconite–Fe-illite–Fe-smectite problem: a critical review. Terra Nova 19:95–104
Meybeck M (2003) Global occurrence of major elements in rivers. In: Drever JI (ed) Treatise on geochemistry. Elsevier, Amsterdam, pp 207–223
Morgan LE, Ramos DPS, Davidheiser-Kroll B, Faithfull J, Lloyd NS, Ellam RM, Higgins JA (2018) High-precision 41 K/39 K measurements by MC-ICP-MS indicate terrestrial variability of δ 41K. J Anal At Spectrom 33:175–186
Nance WB, Taylor SR (1976) Rare earth element patterns and crustal evolution-I. Australian post-Archean sedimentary rocks. Geochim Cosmochim Acta 40:1539–1551
Parendo CA, Jacobsen SB, Wang K (2017) K isotopes as a tracer of seafloor hydrothermal alteration. Proc Natl Acad Sci 114:1827–1831
Palme H, O'Neill HSC (2014) Cosmochemical estimates of mantle composition. In: Treatise on geochemistry, 2nd edn. Elsevier, Oxford, pp 1–39
Raymo ME, Ruddiman WF (1992) Tectonic forcing of late Cenozoic climate. Nature 359:117
Rudnick RL, Gao S (2003) Composition of the continental crust. In: Holland HD, Turekian KK (eds) Treatise on geochemistry. Elsevier, Amsterdam, pp 1–64
Staudigel H (2014) Chemical fluxes from hydrothermal alteration of the oceanic crust. In: Holland HD, Turekian KK (eds) Treatise on geochemistry, 2nd edn. Elsevier, London, pp 583–606
Taylor SR, McLennan SM, McCulloch MT (1983) Geochemistry of loess, continental crustal composition and crustal model ages. Geochim Cosmochim Acta 47:1897–1905
Viers J, Dupre B, Gaillardet J (2009) Chemical composition of suspended sediments in World Rivers: new insights from a new database. Sci Tot Environ 407:853–868
Wang K, Jacobsen SB (2016) An estimate of the Bulk Silicate Earth potassium isotopic composition based on MC-ICPMS measurements of basalts. Geochim Cosmochim Acta 178:223–232
Xu Y-K, Hu Y, Chen X-Y, Huang T-Y, Sletten RS, Zhu D, Teng F-Z (2019) Potassium isotopic compositions of international geological reference materials. Chem Geol 513:101–107
Acknowledgements
This study was supported by the National Key R&D Program of China (Project No. 2017YFC0602801) and National Science Foundation of China (Grant Nos. 41622301, 41873004) to WL. The work done at the University of Wisconsin was in part supported by the NASA Astrobiology Institute (NNA13AA94A to BLB) and the National Science Foundation (1741048-EAR to BLB). On behalf of all authors, the corresponding author states that there is no conflict of interest. The authors appreciate the efficient reviewing and editorial handling of the manuscript by Prof. Yun Liu. This study benefited from constructive criticisms from reviewers who reviewed the earlier version of this manuscript submitted to the journal of Geology in 2016.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, W., Li, S. & Beard, B.L. Geological cycling of potassium and the K isotopic response: insights from loess and shales. Acta Geochim 38, 508–516 (2019). https://doi.org/10.1007/s11631-019-00345-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11631-019-00345-x