Abstract
Effective thermal conductivity and thermal tortuosity are crucial parameters for evaluating the effectiveness of heat conduction within porous media. The direct pore-scale numerical simulation method is applied to investigate the heat conduction processes inside porous structures with different morphologies. The thermal conduction performances of idealized porous structures are directly compared with real foams across a wide range of porosity. Real foam structures are reconstructed using X-ray computed tomography and image processing techniques, while Kelvin and Weaire-Phelan structures are generated through periodic unit cell reconstruction. The detailed temperature fields inside the porous structures are determined by solving the heat conduction equation at the pore scale. The results present that the equivalent thermal conductivity of Kelvin and Weaire-Phelan structures is similar to and greater than that of the real foam structure with the same strut porosity. The thermal tortuosity of real foam structure is relatively larger and the heat conduction path becomes straighter by adopting the anisotropic design. The thermal tortuosity of the fluid channels for Kelvin, Weaire-Phelan, and real foam structures is close to one. The thermal conductivity of porous structures with heat transfer fluid increases as the thermal conductivity ratio of fluid to solid becomes larger. A small porosity of porous media leads to a larger equivalent thermal conductivity due to the dominant contribution of porous skeleton in the heat conduction process. Correlations derived from parallel and series models, as well as the Maxwell-Eucken models, provide decent predictions of effective thermal conductivity, with an average error of less than 8% in the entire range of thermal conductivity ratio.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Mujeebu M A, Abdullah M Z, Bakar M Z A, et al. Applications of porous media combustion technology–A review. Appl Energy, 2009, 86: 1365–1375
Rashidi S, Kashefi M H, Kim K C, et al. Potentials of porous materials for energy management in heat exchangers–A comprehensive review. Appl Energy, 2019, 243: 206–232
He Y L, Du S, Shen S. Advances in porous volumetric solar receivers and enhancement of volumetric absorption. Energy Rev, 2023, 2: 100035
Zhang S, Feng D, Shi L, et al. A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage. Renew Sustain Energy Rev, 2021, 135: 110127
Zhao C B, Hobbs B, Ord A. Near-field performance of chemical dissolution-front instability around a circular acid-injection-well in fluid-saturated porous media. Sci China Tech Sci, 2023, 66: 2025–2035
Du S, Li M J, He Y, et al. Experimental and numerical study on the reflectance losses of the porous volumetric solar receiver. Sol Energy Mater Sol Cells, 2020, 214: 110558
Du S, Li Z Y, He Y L, et al. Experimental and numerical analysis of the hydraulic and thermal performances of the gradually-varied porous volumetric solar receiver. Sci China Tech Sci, 2020, 63: 1224–1234
Petrasch J, Schrader B, Wyss P, et al. Tomography-based determination of the effective thermal conductivity of fluid-saturated reticulate porous ceramics. J Heat Transfer, 2008, 130: 032602
Zafari M, Panjepour M, Davazdah Emami M, et al. Microtomography-based numerical simulation of fluid flow and heat transfer in open cell metal foams. Appl Thermal Eng, 2015, 80: 347–354
Ranut P, Nobile E, Mancini L. High resolution microtomography-based CFD simulation of flow and heat transfer in aluminum metal foams. Appl Thermal Eng, 2014, 69: 230–240
Bodla K K, Murthy J Y, Garimella S V. Microtomography-based simulation of transport through open-cell metal foams. Numer Heat Transfer Part A-Appl, 2010, 58: 527–544
Ranut P, Nobile E, Mancini L. High resolution X-ray microtomography-based CFD simulation for the characterization of flow permeability and effective thermal conductivity of aluminum metal foams. Exp Thermal Fluid Sci, 2015, 67: 30–36
Mendes M A A, Ray S, Trimis D. A simple and efficient method for the evaluation of effective thermal conductivity of open-cell foam-like structures. Int J Heat Mass Transfer, 2013, 66: 412–422
Bianchi E, Schwieger W, Freund H. Assessment of periodic open cellular structures for enhanced heat conduction in catalytic fixed-bed reactors. Adv Eng Mater, 2016, 18: 608–614
Bracconi M, Ambrosetti M, Maestri M, et al. A fundamental analysis of the influence of the geometrical properties on the effective thermal conductivity of open-cell foams. Chem Eng Process, 2018, 129: 181–189
Fiedler T, Solórzano E, Garcia-Moreno F, et al. Lattice monte Carlo and experimental analyses of the thermal conductivity of random-shaped cellular aluminum. Adv Eng Mater, 2009, 11: 843–847
Wang N, Kaur I, Singh P, et al. Prediction of effective thermal conductivity of porous lattice structures and validation with additively manufactured metal foams. Appl Thermal Eng, 2021, 187: 116558
Fu J, Thomas H R, Li C. Tortuosity of porous media: Image analysis and physical simulation. Earth-Sci Rev, 2021, 212: 103439
Haussener S, Coray P, Lipiński W, et al. Tomography-based heat and mass transfer characterization of reticulate porous ceramics for high-temperature processing. J Heat Transfer, 2009, 132: 023305
Kumar P, Topin F, Vicente J. Determination of effective thermal conductivity from geometrical properties: Application to open cell foams. Int J Thermal Sci, 2014, 81: 13–28
Xu W, Jia M, Gong Z. Thermal conductivity and tortuosity of porous composites considering percolation of porous network: From spherical to polyhedral pores. Compos Sci Tech, 2018, 167: 134–140
Zhao Z, Zhou X P, Qian Q H. Fracture characterization and permeability prediction by pore scale variables extracted from X-ray CT images of porous geomaterials. Sci China Tech Sci, 2020, 63: 755–767
Du S, Li M J, Ren Q, et al. Pore-scale numerical simulation of fully coupled heat transfer process in porous volumetric solar receiver. Energy, 2017, 140: 1267–1275
Du S, Tong Z X, Zhang H H, et al. Tomography-based determination of Nusselt number correlation for the porous volumetric solar receiver with different geometrical parameters. Renew Energy, 2019, 135: 711–718
Dietrich B, Schell G, Bucharsky E C, et al. Determination of the thermal properties of ceramic sponges. Int J Heat Mass Transfer, 2010, 53: 198–205
Meinicke S, Dietrich B, Wetzel T. Pore-scale numerical analysis of hydrodynamics and conjugate heat transfer in solid sponges. In: International Heat Transfer Conference 16. Beijing, 2018
Rezaei E, Barbato M, Gianella S, et al. Pressure drop and convective heat transfer in different SiSiC structures fabricated by indirect additive manufacturing. J Heat Transfer, 2020, 142: 032702
Rieks S, Wende M, Preußer N, et al. A hydrodynamic analogy based modelling approach for zero-gravity distillation with metal foams. Chem Eng Res Des, 2019, 147: 615–623
Ranut P. On the effective thermal conductivity of aluminum metal foams: Review and improvement of the available empirical and analytical models. Appl Thermal Eng, 2016, 101: 496–524
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the National Natural Science Foundation of China (Grant Nos. 52306272 and 52341601).
Rights and permissions
About this article
Cite this article
Du, S., Li, D., Li, MJ. et al. Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies. Sci. China Technol. Sci. 67, 1685–1694 (2024). https://doi.org/10.1007/s11431-023-2481-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-023-2481-4