Abstract
This paper investigates the frictional thermoelastic contact of a rigid spherical punch and functionally graded material (FGM) coated half-space with arbitrarily varying material properties. These material parameters include the elastic modulus, Poisson’s ratio, heat conduction parameter, and thermal expansion coefficient. The material parameters of the FGM coating and half-space are assumed to be temperature dependent. The spherical punch is rotated in the FGM-coated half-space at a constant angular speed. The generated frictional heat is related to the friction coefficient, contact radius, angular velocity, and contact pressure. A theoretical formula for the thermoelastic rotating contact problem is established and solved using the finite element method. The main objective of this paper is to investigate the effects of temperature dependence, gradient index, friction coefficient, angular velocity, and gradient form on the surface temperature and stresses.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Barber J R, Ciavarella M. Contact mechanics. Int J Solids Struct, 2000, 37: 29–43
Suresh S. Graded materials for resistance to contact deformation and damage. Science, 2001, 292: 2447–2451
Zhang Y, Kim J W. Graded zirconia glass for resistance to veneer fracture. J Dent Res, 2010, 89: 1057–1062
Jørgensen O, Giannakopoulos A E, Suresh S. Spherical indentation of composite laminates with controlled gradients in elastic anisotropy. Int J Solids Struct, 1998, 35: 5097–5113
Suresh S, Olsson M, Giannakopoulos A E, et al. Engineering the resistance to sliding-contact damage through controlled gradients in elastic properties at contact surfaces. Acta Mater, 1999, 47: 3915–3926
Pender D C, Padture N P, Giannakopoulos A E, et al. Gradients in elastic modulus for improved contact-damage resistance. Part I: The silicon nitride-oxynitride glass system. Acta Mater, 2001, 49: 3255–3262
Pender D C, Thompson S C, Padture N P, et al. Gradients in elastic modulus for improved contact-damage resistance. Part II: The silicon nitride-silicon carbide system. Acta Mater, 2001, 49: 3263–3268
Kashtalyan M, Menshykova M. Three-dimensional elastic deformation of a functionally graded coating/substrate system. Int J Solids Struct, 2007, 44: 5272–5288
Chen P J, Chen S H. Partial slip contact between a rigid punch with an arbitrary tip-shape and an elastic graded solid with a finite thickness. Mech Mater, 2013, 59: 24–35
Demirhan N, Kanber B. Finite element analysis of frictional contacts of FGM coated elastic members. Mech Based Des Struct Machines, 2013, 41: 383–398
Jobin K J, Abhilash M N, Murthy H. A simplified analysis of 2D sliding frictional contact between rigid indenters and FGM coated substrates. Tribol Int, 2017, 108: 174–185
Yilmaz K B, Comez I, Yildirim B, et al. Frictional receding contact problem for a graded bilayer system indented by a rigid punch. Int J Mech Sci, 2018, 141: 127–142
Chen X W, Yue Z Q. Contact mechanics of two elastic spheres reinforced by functionally graded materials (FGM) thin coatings. Eng Anal Bound Elem, 2019, 109: 57–69
Alinia Y, Asiaee A, Hosseini-nasab M. Stress analysis in rolling contact problem of a finite thickness FGM layer. Meccanica, 2018, 54: 183–203
Çömez I, El-Borgi S, Yildirim B. Frictional receding contact problem of a functionally graded layer resting on a homogeneous coated half-plane. Arch Appl Mech, 2020, 90: 2113–2131
Guler M A, Erdogan F. Contact mechanics of graded coatings. Int J Solids Struct, 2004, 41: 3865–3889
Guler M A, Erdogan F. The frictional sliding contact problems of rigid parabolic and cylindrical stamps on graded coatings. Int J Mech Sci, 2007, 49: 161–182
Ke L L, Wang Y S. Two-dimensional sliding frictional contact of functionally graded materials. Eur J Mech-A Solids, 2007, 26: 171–188
Liu T J, Wang Y S, Zhang C Z. Axisymmetric frictionless contact of functionally graded materials. Arch Appl Mech, 2008, 78: 267–282
Dag S, Guler M A, Yildirim B, et al. Sliding frictional contact between a rigid punch and a laterally graded elastic medium. Int J Solids Struct, 2009, 46: 4038–4053
Çömez İ. Contact problem for a functionally graded layer indented by a moving punch. Int J Mech Sci, 2015, 100: 339–344
Chen P J, Chen S H, Peng J. Frictional contact of a rigid punch on an arbitrarily oriented gradient half-plane. Acta Mech, 2015, 226: 4207–4221
Chen P J, Chen S H, Peng J. Sliding contact between a cylindrical punch and a graded half-plane with an arbitrary gradient direction. J Appl Mech, 2015, 82: 041008
El-Borgi S, Abdelmoula R, Keer L. A receding contact plane problem between a functionally graded layer and a homogeneous substrate. Int J Solids Struct, 2006, 43: 658–674
El-Borgi S, Usman S, Güler M A. A frictional receding contact plane problem between a functionally graded layer and a homogeneous substrate. Int J Solids Struct, 2014, 51: 4462–4476
Aizikovich S M, Krenev L I, Trubchik I S. The deformation of a half-space with a gradient elastic coating under arbitrary axisymmetric loading. J Appl Math Mech, 2008, 72: 461–467
Aizikovich S M, Alexandrov V M, Kalker J J, et al. Analytical solution of the spherical indentation problem for a half-space with gradients with the depth elastic properties. Int J Solids Struct, 2002, 39: 2745–2772
Barik S P, Kanoria M, Chaudhuri P K. Steady state thermoelastic contact problem in a functionally graded material. Int J Eng Sci, 2008, 46: 775–789
Shahzamanian M M, Sahari B B, Bayat M, et al. Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads. Mater Des, 2010, 31: 4655–4665
Afsar A M, Go J. Finite element analysis of thermoelastic field in a rotating FGM circular disk. Appl Math Model, 2010, 34: 3309–3320
Liu J, Ke L L, Wang Y S. Two-dimensional thermoelastic contact problem of functionally graded materials involving frictional heating. Int J Solids Struct, 2011, 48: 2536–2548
Krenev L I, Aizikovich S M, Tokovyy Y V, et al. Axisymmetric problem on the indentation of a hot circular punch into an arbitrarily nonhomogeneous half-space. Int J Solids Struct, 2015, 59: 18–28
Kulchytsky-Zhyhailo R, Bajkowski A S. Axisymmetrical problem of thermoelasticity for halfspace with gradient coating. Int J Mech Sci, 2016, 106: 62–71
Zhang H B, Wang W Z, Zhang S G, et al. Semi-analytical solution of three-dimensional steady state thermoelastic contact problem of multilayered material under friction heating. Int J Thermal Sci, 2018, 127: 384–399
Çömez İ. Thermoelastic receding contact problem of a layer resting on a half plane with frictional heat generation. J Thermal Stresses, 2021, 44: 566–581
Choi H J, Paulino G H. Thermoelastic contact mechanics for a flat punch sliding over a graded coating/substrate system with frictional heat generation. J Mech Phys Solids, 2008, 56: 1673–1692
Barik S P, Chaudhuri P K. Thermoelastic contact between a functionally graded elastic cylindrical punch and a half-space involving frictional heating. J Eng Math, 2012, 76: 123–138
Chen P J, Chen S H, Peng Z L. Thermo-contact mechanics of a rigid cylindrical punch sliding on a finite graded layer. Acta Mech, 2012, 223: 2647–2665
Chen P J, Chen S H. Thermo-mechanical contact behavior of a finite graded layer under a sliding punch with heat generation. Int J Solids Struct, 2013, 50: 1108–1119
Liu J, Ke L L, Wang Y S, et al. Thermoelastic frictional contact of functionally graded materials with arbitrarily varying properties. Int J Mech Sci, 2012, 63: 86–98
Balci M N, Dag S, Yildirim B. Subsurface stresses in graded coatings subjected to frictional contact with heat generation. J Thermal Stresses, 2017, 40: 517–534
Nili A, Adibnazari S, Karimzadeh A. Stress field in the thermoelastic rolling contact of graded coatings. Arch Appl Mech, 2018, 88: 1805–1814
Nili A, Adibnazari S, Karimzadeh A. Rolling contact mechanics of graded coatings involving frictional heating. Acta Mech, 2019, 230: 1981–1997
Kim Y W. Temperature dependent vibration analysis of functionally graded rectangular plates. J Sound Vib, 2005, 284: 531–549
Liu J, Ke L L, Zhang C Z. Axisymmetric thermoelastic contact of an FGM-coated half-space under a rotating punch. Acta Mech, 2021, 232: 2361–2378
Civelek M B. The axisymmetric contact problem for an elastic layer on a frictionless half-space. Dissertation for Doctoral Degree. Bethlehem: Lehigh University, 1972
Malekzadeh P, Ghorbani Shenas A, Ziaee S. Thermal buckling of functionally graded triangular microplates. J Braz Soc Mech Sci Eng, 2018, 40: 418
Gao J X, Cao Y Z, Lu L H, et al. Study on the interaction between nanosecond laser and 6061 aluminum alloy considering temperature dependence. J Alloys Compd, 2022, 892: 162044
Johnson K L. Contact Mechanics. Cambridge: Cambridge University Press, 1985
Liu T J, Wang Y S. Axisymmetric frictionless contact problem of a functionally graded coating with exponentially varying modulus. Acta Mech, 2008, 199: 151–165
Shi Z. Mechanical and thermal contact analysis in layered elastic solids. Dissertation for Doctoral Degree. Minnesota: University of Minnesota, 2001
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the National Natural Science Foundation of China (Grant Nos. 11725207 and 12021002).
Rights and permissions
About this article
Cite this article
Zhou, J., Shen, F., Liu, J. et al. Thermoelastic rotating contact of an FGM coating with temperature-dependent and arbitrary varying properties. Sci. China Technol. Sci. 66, 1038–1049 (2023). https://doi.org/10.1007/s11431-022-2219-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-022-2219-9