Abstract
In this paper, the effects of different CdCl2 annealing methods, including vapor annealing and dip-coating annealing, on the performance of CdS/CdTe polycrystalline thin-film solar cells are studied. After annealing, the samples are lightly etched with 1% bromine in methanol to remove surface oxides. Both annealing methods give CdTe polycrystalline thin films with good crystallinity and complete structure. For solar cells containing the annealed CdTe films, cell efficiency first increases and then decreases as the concentration of CdCl2 solution used for dip-coating annealing increases, and the optimized CdCl2 concentration is 12%. The uniformity of the performance of all cells is analyzed by calculating the relative standard deviation for each parameter. The uniformity of cell performance can be improved dramatically by dip-coating annealing instead of vapor annealing. Most notably, an appropriate concentration of CdCl2 (12%) acts as a protective layer that is conducive to realizing uniform high-performance CdS/CdTe solar cells. According to the location of depletion regions, the CdTe films treated by dip-coating annealing show a relatively low doping concentration, except for the sample treated with a CdCl2 concentration of 6%, which is consistent with the changes of short-circuit current density of the cells. It is believed that these results can be applied to the large-scale production of CdTe polycrystalline thin-film solar cells.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Rajeshwar, K. Electrosynthesized thin films of group II-VI compound semiconductors, alloys and superstructures. Adv Mater, 1992, 4: 23–29
Siepchen B, Drost C, Späth B, et al. Thin film CdTe solar cells by close spaced sublimation: Recent results from pilot line. Thin Solid Films, 2013, 535: 224–228
Martin A G, Keith E, Yoshihiro H, et al. Solar cell efficiency tables (Version 45). Prog Photovolt: Res Appl, 2015, 23: 1–9
Lemmon J P, Evgueni P, Wendy D, et al. Thin metal oxide films to modify a window layer in CdTe-based solar cells for improved performance. Appl Phys Lett, 2012, 100: 213908–4
Salavei A, Rimmaudo I, Piccinelli F, et al. Influence of CdTe thickness on structural and electrical properties of CdTe/CdS solar cells. Thin Solid Films, 2013, 535: 257–260
Emziane M, Durose K, Halliday D P. Efficiency improvement in thin-film solar cell devices with oxygen containing absorber layer. Appl Phys Lett, 2005, 87: 261901–2
Pookpanratana S, Liu X, Paudel N R, et al. Effects of postdeposition treatments on surfaces of CdTe/CdS solar cells. Appl Phys Lett, 2010, 97: 172109–3
Potlog T, Ghimpu L, Gashin P, et al. Influence of annealing in different chlorides on the photovoltaic parameters of CdS/CdTe solar cells. Sol Energ Mat Sol C, 2003, 80: 327–334
Antolin G D C, Dhere R G, de Avillez R R, et al. Rietveld analysis of CdS/CdTe thin film junctions submitted to a CdCl2 heat treatment. Thin Solid Films, 2013, 539: 356–359
Riech I, Pena J L, Ares O, et al. Effect of annealing time of CdCl2 vapor treatment on CdTe/CdS interface properties. Semicond Sci Technol, 2012, 27: 045015–6
Rimmaudo I, Salavei A, Romeo A. Effects of activation treatment on the electrical properties of low temperature grown CdTe devices. Thin Solid Films, 2013, 535: 253–256
Kim M J, Sang H S, Lee S H. Reaction kinetics study of CdTe thin films during CdCl2 heat treatment. Sol Energ Mat Sol C, 2011, 95: 2295–2301
Wu X Z. High-efficiency polycrystalline CdTe thin-film solar cells. Solar Energy, 2004, 77: 803–814
Zeng G G, Feng L H, Li B, et al. Preparation and properties of CdTe thin-film deposited on glass. Semicon Optoelectron, 2005, 6: 226–228
Gu S S, Hu X J, Huang K. Effects of annealing temperature on the microstructure and p-type conduction of B-doped nanocrystalline diamond films. Acta Phys Sin, 2013, 62: 118101–10
Wu X W, Wu D J, Liu X J. Effects of B (N,F) doping on optical properties of TiO2 nanoparticles. Acta Physica Sinica, 2010, 59: 4788–2793
Proskuryakov Y Y, Durose K, Major J D, et al. Doping levels, trap density of states and the performance of co-doped CdTe (As,Cl) photovoltaic devices. Sol Energ Mat Sol C, 2009, 93: 1572–1581
Major J D, Treharne R E, Phillips L J. A low-cost non-toxic post-growth activation step for CdTe solar cells. Nature, 2014, 511: 334–337
Major J D, Proskuryakov Y Y, Durose K. Impact of CdTe surface composition on doping and device performance in close Space sublimation deposited CdTe solar cells. Prog Photovolt: Res Appl, 2013, 21: 436–443
Blood P, Orton J W. The Electrical Characterization of Semiconductors: Majority Carriers and Electron States. London: Academic Press, 1992. 237–247
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zeng, G., Zhang, J., Li, B. et al. Effects of different CdCl2 annealing methods on the performance of CdS/CdTe polycrystalline thin film solar cells. Sci. China Technol. Sci. 58, 876–880 (2015). https://doi.org/10.1007/s11431-015-5787-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-015-5787-2