In this paper, an isothermal diagram of the second phase formation in the Hastelloy G35 alloy was constructed to understand possible phase transformations during welding. A welded joint has been studied in three areas: fusion zone (FZ), the heat affected zone (HAZ), and the base metal (BM). The FZ is represented by a dendritic structure; in addition, σ-phase intermetallic compounds are present in the FZ and HAZ. Furthermore, the FZ and BM present similar hardness values, while the hardness increases in the HAZ. It has been established that thermal effects for different areas are characterized by different rates of increase up to 650°C.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. Ramu, V. Pavlik, V. Sillikova, O. Matselko, and M. Boca, Mater. Corros., 74 (5), 670–682 (2023); https://doi.org/10.1002/maco.202213412.
G. M. Chirieleison, G. L. Hoback, P. Crook, et al., Weld. J., 87, No. 5, 119–123 (2008).
P. Houlle and M. Chagraoui, Procedia Eng., 46, 279–284 (2012); https://doi.org/10.1016/j.proeng.2012.09.473.
N. Keskar, A. K. Pattanaik, K. V. Mani Krishna, et al., Metall. Mater. Trans. A, 48, 3096–3107 (2017); https://doi.org/10.1007/s11661-017-4066-1.
K. C. Tekin and U. Malayoglu, Tribol. Lett., 37 (3), 563–572 (2010); https://doi.org/10.1007/s11249-009-9552-1.
A. Laureys, E. Wallaert, L. Claeys, et al., Procedia Struct. Integr., 42, 1458–1466 (2022); https://doi.org/10.1016/j.prostr.2022.12.186.
A. Ramu, V. Pavlik, V. Sillikova, and M. Boca, Materials, 16, 2679 (2023); https://doi.org/10.3390/ma16072679.
J.-O. Nilsson, P. Kangas, A. Wilson, and T. Karlsson, Metall. Mater. Trans. A, 31, 35–45 (2000); https://doi.org/10.1007/s11661-000-0050-1.
H. M. Tawancy, J. Mater. Sci., 18, 2976–2986 (1983); https://doi.org/10.1007/BF00700780.
S. A. David and J. M. Vitek, Int. Mater. Rev., 34 (5), 213–245 (1989); https://doi.org/10.1179/imr.1989.34.1.213.
H. Schönmaier, R. Krein, M. Schmitz-Niederau, and R. Schnitzer, J. Mater. Eng. Perform., 30 (10), 7138–7151 (2021); https://doi.org/10.1007/s11665-021-05922-x.
The SAO Astrophysics Data System; https://ui.adsabs.harvard.edu/abs/2021JMEP...30.7138S/abstract.
A. Y. Zhilyakov, S. V. Belikov, A. F. Gibadullina, et al., Met. Sci. Heat Treat., 11–12, 792–797 (2020); https://doi.org/10.1007/s11041-020-00502-7.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chuquimarca, P.K., Pyrin, D.V., Ivanov, K.O. et al. Structure and Properties of a Welded Joint of a Corrosion-Resistant Nickel Alloy Used for Work in Molten Salts. Russ Phys J (2024). https://doi.org/10.1007/s11182-024-03269-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11182-024-03269-z