The features of structure formation and properties of bronze-steel composite samples formed by wire-feed electron beam additive manufacturing are studied. The studies show that at the bronze-to-steel ratio of 1:1 quite homogeneous structure is formed in them, with dendritic steel fragments and bronze filling the interdendritic space. When fabricated at the optimum process parameters, the samples do not contain any pores, inclusions, discontinuities or delamination. The strength characteristics of the resulting composites significantly exceed those of the base pure bronze. The mechanical properties of the samples are very similar in the compression and build direction. The yield strength values, calculated based on the contributions from different phases, differ from the measured values by up to 20%.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M. Hosseini, N. Pardis, H. D. Manesh, et al., Mater. Des., 113, 128 (2017). https://doi.org/10.1016/j.matdes.2016.09.094.
N. V. Martyushev, I. V. Semenkov, Y. N. Petrenko, et al., Nanomater, 89 (2014). https://doi.org/10.4028/www.scientific.net/AMR.880.174.
G. P. Chaudhari and V. Acoff, Compos. Sci. Technol., 69, 1667 (2009). https://doi.org/10.1016/j.compscitech.2009.03.018.
I. Hordych, K. Barienti, S. Herbst, et al., Metals, 11, 917 (2021). https://doi.org/10.3390/met11060917.
E. S. Statnik, P. A. Somov, D. D. Zherebtsov, et al., Mater. Sci. Eng. A, 858, 144110 (2022). https://doi.org/10.1016/j.msea.2022.144110.
I. N. Maliutina, V. I. Mali, I. A. Bataev, et al., Sci. World J., 256758 (2013). https://doi.org/10.1155/2013/256758.
C. Tan, K. Zhou, W. Ma, et al., Mater. Des., 155, 77 (2018). https://doi.org/10.1016/j.matdes.2018.05.064.
E. A. Kolubaev, V. E. Rubtsov, A. V. Chumaevsky, et al., Phys. Mesomech., 25, 479 (2022). https://doi.org/10.1016/j.jallcom.2018.01.318.
J. Chen, Y. Yang, C. Song, et al., Mater. Sci. Eng., A, 752, 75 (2019). https://doi.org/10.1016/j.msea.2019.02.097.
X. Cai, Z. Wang, L. Dong, et al., Mater. Des., 221, 110969 (2022). https://doi.org/10.1016/j.matdes.2022.110969.
S. Y. Tarasov, A. V Filippov, N. L. Savchenko, et al., Int. J. Adv. Manuf. Technol., 99, 2353 (2018). https://doi.org/10.1007/s00170-018-2643-0.
V. R. Utyaganova, A. V. Filippov, N. N. Shamarin, et al., Int. J. Adv. Manuf. Technol., 108, 2823 (2020). https://doi.org/10.1007/s00170-020-05539-9.
B. Song, X. Zhao, S. Li, et al., Front. Mech. Eng., 10, 111 (2015). https://doi.org/10.1007/s11465-015-0341-2.
E. A. Jägle, P. P. Choi, J. Van Humbeeck, et al., J. Mater. Res., 29, 2072 (2014). https://doi.org/10.1007/s11465-015-0341-2.
Y. Bai, Y. Yang, D. Wang, M. Zhang, Mater. Sci. Eng. A., 703, 116 (2017). https://doi.org/10.1016/j.msea.2017.06.033.
V. Juechter, T. Scharowsky, R. F. Singer, et al., Acta Mater., 76, 252 (2014). https://doi.org/10.1016/j.actamat.2014.05.037.
X. He, T. DebRoy, P. W. Fuerschbach, J. Appl. Phys., 94, 6949–6958 (2003). https://doi.org/10.1063/1.1622118.
J. Zhou, J. Zhang, C. Hu, et al., Mater. Sci. Eng. A, 874, 145088 (2023). https://doi.org/10.1016/j.msea.2023.145088.
Ya. B. Fridman, Mechanical Engineering [in Russian], Mashinostroyeniye, Moscow (1974).
A. Zykova, A. Panfilov, A. Chumaevskii, et al., Mat. Lett., 338, 108477 (2023). https://doi.org/10.1016/j.matlet.2023.134064.
Q. Luo and A. H. Jones, Surf. Coat. Technol., 205, 1403–1408 (2010). https://doi.org/10.1016/j.surfcoat.2010.07.108.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chumaevskii, A.V., Osipovich, K.S., Panfilov, A.O. et al. Structure Formation of Composite Material Based on Ferrite-Pearlite Steel and Aluminum Bronze Produced by Wire-Feed Electron Beam Additive Manufacturing. Russ Phys J 66, 1021–1030 (2023). https://doi.org/10.1007/s11182-023-03039-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-023-03039-3