Using equal-channel angular pressing as an example, the effect of metal-flow kinematics under condition of severe plastic deformation of metals on the value of strain and features of structural changes is considered. The role of shear and rotational strain in the formation of ultrafine-grained structures is shown and the contribution into the total deformation is defined. Using equal-channel angular pressing as an example, the effect of metal-flow kinematics under condition of severe plastic deformation of metals on the value of strain and features of structural changes is considered. The role of shear and rotational strain in the formation of ultrafine-grained structures is shown and the contribution into the total deformation is defined.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R. R. Mulyukov, Nanotechnologies in Russia, 2, Nos. 7–8, 38–53 (2007).
A. A. Nazarov and R. R. Mulyukov, Nanoscience, Engineering and Technology, Handbook (Eds. S. Lyshevski, D. Brenner, J. Iafrate, and W. Goddard), Boca Raton, CRC Press (2002).
R. Z. Valiev, A. P. Zhilyaev, and T. G. Langdon, Bulk Nanostructured Materials, Hoboken, Wiley (2013).
A. M. Glazer and L. S. Metlov, J. Phys. Sol. State, 52, No. 6, 1162–1169 (2010).
R. R. Mulyukov, A. A. Nazarov, and R. M. Imaev, Russ. Phys. J., 51, No. 5, 492–504 (2008).
L. I. Sedov, Continuum Mechanics [in Russian], Moscow, Nauka (1976).
V. V. Rybin, Large Plastic Deformations and Failure of Metals [in Russian], Moscow, Metallurgiya (1986).
F. Z. Utyashev, Zh. Kuzn. Stamp. Proizv. (Metal forming processes), No. 5, 33–35 (2011).
F. Z. Utyashev, Zh. Kuzn. Stamp. Proizv. (Metal forming processes), No. 6, 25–33 (2011).
F. Z. Utyashev, Zh. Kuzn. Stamp. Proizv. (Metal forming processes), No. 7, 31–36 (2011).
V. Segal, V. I. Reznikov, V. I. Kopylov, D. A. Pavlik, and V. F. Malyshev, Processes for Plastic Structuring of Metals [in Russian], Minsk, Nauka i Tekh. (1994).
F. Z. Utyashev and G. I. Raab, Deformation Method for Production and Processing of Ultrafinegrained and Nanostructured Materials [in Russian], Ufa, Gilem (2013).
F. Z. Utyashev, Advance Methods of Severe Plastic Deformation [in Russian], RIK UGATU (2008).
J. Friedel, Dislocations, Addison-Wesley (1964).
Recrystallization of Metallic Materials (Ed. F. Hessner), Dr. Riederer Verlag GmbH, Stuttgart (1978).
I. I. Novikov, The Theory of Heat Treatment [in Russian], Moscow, Metallurgiya (1986).
D. A. Hughes and N. Hansen, Acta Mater., 48, 2985–3004 (2000).
F. Z. Utyashev and G. I. Raab, J. Phys. Met. Metallogr., 104, 582–594 (2007).
K. De Witte, Theory of Disclinations: Continuus and Discrete, Washington DC, J. Res. Nat. Bureau Stand. (1973).
F. Z. Utyashev, Mater. Sci. Forum, 667–669, 45–49 (2011).
V. V. Rybin, Voprosy Materialoved., No. 1(29), 11–33 (2002).
A. P. Zhilyaev, K. Ohishi, G. I. Raab, and T. R. McNelley, Ultrafine-Grained Materials IV (Eds. Y. T. Zhu, T. G. Langdon, Z. Horita, N. I. Zehetbauer, and S. L. Semiatin), TMS (2006).
F. Z. Utyashev and G. I. Raab, J. Phys. Met. Metallogr., 101, No. 10, 285–295 (2006).
F. Z. Utyashev and G. I. Raab, Zh. Kuzn. Shtamp. Proizv. (Metal forming processes), No. 11, 13–20 (2008).
F. Z. Utyashev, F. U. Enikeev, and V. V. Latysh, Izv. RAS. Metals, No. 4, 72–79 (1998).
F. Z. Utyashev, R. U. Sukhorukov, V. L. Afonin, et al., Zh. Probl. Mashinostr. Avtomatiz., No. 1, 109–116 (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 1, pp. 64–71, January, 2015.
Rights and permissions
About this article
Cite this article
Utyashev, F.Z., Sukhorukov, R.U., Nazarov, A.A. et al. The Values of Strain Components and Their Role in Formation of Ultrafine-Grained and Nanosized Structure in Materials by Means of Severe Plastic Deformation. Russ Phys J 58, 70–78 (2015). https://doi.org/10.1007/s11182-015-0464-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-015-0464-2