Abstract
By combining photophysical measurements with transmission electron microscopy, we proved that the thickness of the silica shell around gold nanorods determines the position of the longitudinal plasmonic band when they are isolated in solution or assembled in solid. The silica thickness has been tuned by modulating the reaction time and the ratio between CTAB-coated gold nanorods and TEOS concentration, obtaining gold nanorods covered by a silica shell with a thickness varying from 3.5 to 24 nm. Considering this shell as a spacer between the gold cores, it is possible to modulate the coupling of the localized surface plasmon resonance (LSPR) of neighboring nanorods. Moreover, the comparison between the extinction spectra in solution and in solid, recorded from nanorods covered by silica shell with different thickness, can be used to estimate the inter-nanoparticles distance required for plasmon interaction. We found that LSPR coupling is effective when the distance between the gold cores is no more than 10 nm. When the distance is greater, the nanorods do not interact with each other.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Gold nanoparticles (AuNPs) with various shapes, size, and organization show unique scattering spectra depending on their geometries (Hao et al. 2004; Xia et al. 2003; Creighton and Eadon 1991; Candreva et al. 2020). Spectroscopy and TEM are precious techniques to identify, characterize, and study nanoparticle features. Anisotropic nanoparticles show more than one plasmonic peak located in the visible and near-infrared region of the electromagnetic spectrum, associated with the various orientations of the particle axes relative to the electric field of light (Hao et al. 2004; Eustis and El-Sayed 2006; Burda et al. 2005; Teranishi et al. 2000; Yamada and Niidome 2006). In particular, for gold nanorods (AuNRs), the transverse oscillation is peaked at around 513 nm (Wu et al. 2016; Murphy et al. 2011), while the longitudinal resonance gives rise to a band whose position, ranging from 700 to 850 nm, depends on the aspect ratio and other factors, such as the covering agent (Pérez-Juste et al. 2005; Chen et al. 2013; Wang et al. 2013a; Wang et al. 2020; Wu and Tracy 2015; Mayer and Hafner 2011). Organized superstructures of gold nanorods show an optical appearance different from the isolated nanorods (Zhang et al. 2015; Vial et al. 2007; Lunn et al. 2015), and this behavior has been attributed to the plasmon coupling (Jain et al. 2006).
To spatially organize anisotropic gold nanoparticles, two strategies should in principle be followed: one based on the interparticle forces due to a proper functionalization of the AuNPs (direct assembly) (Ni et al. 2010; Kumar et al. 2013; Kawamura et al. 2007; Ahijado-Guzmán et al. 2016); the other based on the presence of an orienting medium (indirect assembly) (Coursault et al. 2012; Rožič et al. 2017). In any case, plasmonic coupling was found to be highly dependent on interparticle spacing and the effectiveness of the NP coating in modulating the plasmonic field. Coverage can modulate the plasmonic field in several ways: it can guide the assembly of nanoparticles in a precise structural order, (Jain et al. 2006) or avoid plasmon interaction (Comenge et al. 2016) by increasing the distance between nanoparticles. The effectiveness of plasmonic coupling increases as the distance between the nanorods decreases and the number of interacting NPs increases. (Kumar et al. 2013; Sahu and Raj n.d.).
In this perspective, by using a versatile coating agent such as silica, it is possible to adjust the maximum distance between the nanoparticles necessary for the plasmon interaction. The thickness of the silica coating that covers AuNPs can be adjusted with the consequence of modulating the distance between the assembled gold nanorods and controlling their plasmonic coupling properties. With this in mind, the silica coating strategy (Wu and Tracy 2015; Jiang et al. 2016; Gorelikov and Matsuura 2008; Liz-Marzán et al. 1996; Carrasco et al. 2016; Guerrero-Martínez et al. 2010; Abadeer et al. 2014; Pellas et al. 2020) consists of a pH-controlled condensation of tetraethylorthosilicate (TEOS) precursor onto CTAB-capped gold nanorods. Hydrolysis and condensation of TEOS require alkaline conditions, generally reached by adding to the sample ammonia or strong bases such as NaOH. CTAB surfactant deposited onto AuNRs is a structure-directing agent (Ming et al. 2009) that facilitates the formation of mesostructured silica shell around nanorods. The silica shell grows anisotropically on AuNRs; it is deposited first selectively at the two ends of the nanorods, due to the greater curvature, then grows over the entire surface of the nanoparticles (Adelt et al. 2021; Wang et al. 2013b).
The synthesis of silica-coated AuNRs requires fine-tuning the value of some parameters and the quantities of the reagents: here the individual contributions are discussed, estimating the quantity of each to obtain a homogeneous silica shell. Considering the reaction time and the ratio between the concentrations of the CTAB-coated AuNRs and TEOS, we adjusted the thickness of the silica around NRs. Using this cover agent as spacer between AuNRs, we found that the coupling of the plasmonic fields is effective when the distance between nanoparticles is not higher than 10 nm. When the distance is greater, no nanorod interact each other.
Materials and methods
Chemicals
Hexadecyltrimethylammonium bromide (CTAB, ≥96%), 5-bromosalicylic acid (technical grade, 90%), hydrogen tetrachloroaurate trihydrate (HAuCl4•H2O, ≥99.9%), silver nitrate (AgNO3, ≥99.0%), L-ascorbic acid (≥99%), sodium iodide 99.99%), trisodium citrate (99%), polyvinilpolypyrrolidone (PVP K15, Mn 10000), and sodium borohydride (NaBH4, 99%) were purchased from Aldrich and used as received. Milli-Q water (resistivity 18.2 MΩ•cm at 25 °C) was used in all experiments. All glasswares were washed with aqua regia, rinsed with water, sonicated threefold for 3 min with Milli-Q water, and dried before use. TEOS (Alfa Aesar, 99.9%), NaOH (Sigma Aldrich, 98%), and MeOH (Sigma Aldrich) were used for the SiO2 over coating.
Instruments and methods
A Perkin Elmer Lambda 900 spectrophotometer was employed to obtain the extinction spectra (Cretu et al. 2018; Pf et al. 2020; Ionescu et al. 2019). The size and morphology of the gold nanoparticles were measured using a transmission electron microscope (Jeol JEM-1400 Plus 120 kV). The samples for transmission electron microscopy (TEM) were prepared by depositing a drop of a diluted solution on 300 mesh copper grids. After evaporation of the solvent in air at room temperature, the particles were observed at an operating voltage of 80 kV.
Synthesis
An aqueous solution of CTAB (until a final concentration of 1.0E-3 M) has been added to 2 mL of an aqueous dispersion of AuNR@CTAB (0.3 E-3 M, A.R. 4) (Cretu et al. 2018; Pf et al. 2020). After few seconds, 20 μL of a 0.1 M NaOH aqueous solution were added under vigorous stirring, reaching a pH value of 8.5, followed by three additions, in intervals of 1 h from each other, each of 12 μL, of TEOS 20% v/v in methanol under gentle stirring, at room temperature. After 14 h, the mixture was centrifuged in MilliQ water twice at 6000 rpm for 10 min and the sample was dispersed in 2 mL of MilliQ water (Wu and Tracy 2015; Jiang et al. 2016). Undesired core-free silica particles can be eliminated by the appropriate centrifugation step, but it is not unusual that a small fraction remains in the final sample.
This sample made up of AuNRs coated by silica, AuNR@SiO2, (hereinafter referred to as the Starting Sample) and the protocol followed to obtain it, are the point of reference with which to compare the obtained results.
Results and discussion
Thickness control of silica shell and photophysical measurements of isolated gold nanorods
TEM image of the nanorods of the Starting Sample (Fig. 1a) shows the silica shell around nanorods with a thickness of 24 nm × 12 nm, long axis × short axis, respectively. Silica shell modifies the spectral position of the AuNRs longitudinal LSPR peak (Fig. 1b): the peak at 836 nm of AuNR@SiO2 solution is red-shifted compared to that of the AuNR@CTAB solution, positioned at 783 nm. This is due to the fact that the metal-dielectric interface in the case of AuNR@SiO2 is made up of silica which has a higher refractive index (nd20=1.45) than the AuNR@CTAB interface, which is actually made up of the water (nd20 =1.33) embedding CTAB. As shown below, as the thickness of the silica shell increases, the longitudinal band shifts towards red accordingly.
Experimental parameters controlled during the silica coverage of gold nanorods include pH, concentration of the added CTAB solution, TEOS amount, concentration of the AuNR@CTAB solution, and the reaction time. Firstly, we have optimized the pH value and CTAB concentration, to obtain a detectable and homogeneous silica shell, and then we have studied the correlation between the [TEOS]/[AuNR@SiO2] ratio and the silica coverage.
Hydrolysis and condensation: pH value
The quantity of NaOH necessary to obtain the Starting Sample corresponds to a pH value of 8.5. By changing the amount of NaOH to measure a pH value of around 10, the gold nanorods precipitate to the bottom of the vials in seconds. By lowering the amount of NaOH to reach a final pH value of 8, no precipitation was recorded, but the TEM image (Fig. 1 in SI) showed the absence of an appreciable silica coating.
In the first case (pH=10), the alkalinity of the reaction environment causes a rapid TEOS polymerization creating a sort of cloud that incorporates a number of gold nanorods, triggering their precipitation. In the second case (pH=8), the alkalinity of the reaction environment is insufficient to prompt a good TEOS polymerization, so the silica coverage of nanorods is poor. In conclusion, pH=8.5 can be considered an optimal value.
Homogeneity of the silica shell: CTAB concentration
As previously reported, the first step of the silica shell growth is the addition of an aqueous solution of CTAB to an aqueous dispersion of AuNR@CTAB. In the Starting Sample (see experimental part), we used a solution of CTAB 1.0E-3 M, but we ascertained that using a CTAB concentration of 5.0E-4 M, the silica coverage appears to be unchanged (Fig. 2 in SI). By halving the CTAB concentration again down to 2.5E-4 M, we obtained a disappointing result as shown in the TEM image of Fig. 3 in SI, while reducing again the CTAB concentration down to 2.5E-5 M, after few hours from the latest TEOS addition, a burgundy cloud appeared in the solution which in a few seconds precipitated on the bottom of the vials.
Because CTAB molecules adsorbed on AuNRs act as templates for the growth of the silica shell, it is necessary to maintain this coverage during TEOS condensation; nevertheless, the addition of NaOH can dislodge CTAB molecules from the gold surface (on which they are held by electrostatic interactions) due to the presence of the Na+ hard ions.
Successively, we increased CTAB concentration up to 4.0E-3 M. TEM images (Fig. 4 in SI) show the expected AuNR@SiO2 nanoparticles, but the silica coverage is not uniform on the gold surface, and the size of AuNR@SiO2 appears inhomogeneous. These features can be attributed to the excessive CTAB concentration over the CMC (Scarabelli et al. 2015) that hampers the formation of the templating micelles, leading to a disordered silica growth.
Thickness control: TEOS concentration
The silica shell thickness can be modulated by varying the amount of TEOS. On this basis, we carry out various syntheses keeping constant the concentration of AuNR@CTAB (0.3E-3 M) and the other parameters (as reported in the paragraph Synthesis), and varying only the quantity of TEOS.
We tested four protocols with different amounts of TEOS, obtaining AuNR@SiO2 samples with different thicknesses of silica determined by TEM (Table 1): Figs. 2, 3, 4, and 5 report TEM images, Fig. 6 the extinction spectra of the samples.
The silica thickness is reduced by decreasing the quantity of TEOS, although a considerable reduction of TEOS does not correspond to a notable thickness reduction. The extinction spectra show the typical red-shift due to the presence silica cover. It is interesting to note that the magnitude of the redshift is reduced by decreasing the amount of TEOS; this is to be attributed to a greater porosity of the shell, which incorporates a greater quantity of water.
Thickness control: AuNR@CTAB concentration
To test the effect of the AuNR@CTAB concentration on silica thickness, we increased this concentration up to 3.0E-3 M (Starting Sample’ in Table 2). We estimated the AuNR concentration, according to Scarabelli et al., considering that all Au3+ has been reduced to Au0 (Scarabelli et al. 2015). By increasing the concentration of AuNR@CTAB, we correspondingly doubled the amount of NaOH to have a pH = 8.5. As expected, the thickness of the silica was significantly reduced compared to the products of the Starting Sample (12 nm × 7 nm vs 24 nm × 12 nm, respectively), because the amount of TEOS available for each AuNR is reduced.
Taking into account that TEOS amount used to obtain sample 3 (Table 1) allows to attain the thinner silica thickness, we fixed a TEOS amount of 0.1E-4 mol (12 μL) (while Starting Sample sets a 0.3E-4 mol value). Therefore, we prepared two samples, 3′ and 3′′, with the same TEOS amount (0.1E-4 mol, 12 μL) but different AuNR@CTAB concentration (Table 2), observing a different silica thickness: Fig. 7 a, b, c report TEM images of the samples, Fig. 7d the extinction spectra. In particular, spectra show the usual red-shift of the longitudinal NR band substituting CTB coverage with silica one, which is reduced according to the thinning of silica thickness.
Thickness control: reaction time
Silica shell growth is rapid during the first hour, but slows down considerably during the second hour of reaction. In the Starting Sample, the reaction time (i.e., the time interval between the last addition of TEOS and the purification step) was set at 14 h. To study the effect of the reaction time variation on the silica thickness, we synthesized AuNR@SiO2 samples starting from the three recipes already illustrated (Starting Sample, 3 and 3′), and reducing the reaction time to 1h.
The obtained results are reported in Table 3 and TEM images in Figures 8, 9, and 10.
Photophysical measurement of assembled gold nanorods covered with silica
To explore the occurrence of the coupling among AuNR@SiO2, taking into account that the reciprocal distance between nanorods can be tuned by controlling the thickness of their silica shells, we compared the Starting Sample′, 3′,3′′. In particular, we compared extinction spectra from the water solution and from the film obtained by drop-casting of the solutions on quartz windows, thus, taking into account that in the solution there are no assemblies and therefore no coupling (Scarabelli et al. 2013), any difference should be attributable to the interaction of gold nanorods.
Observing the TEM image in Fig. 7a, we noticed the tendency of the nanoparticles to remain closed as much as possible, but no spectral variations were noted: the superimposition between the spectrum in solution and the spectrum of the film (Fig. 11) accounts for the absence of coupling. The small blue-shift of the longitudinal band of film sample compared to that in solution (hardly observable also in the previous sample), is attributed to the high sensitivity of this band to the refractive index variation on passing from water (nd20 =1.33) to air (nd20 = 1.00).
Sample 3′ 10 nm × 8 nm
Observing the TEM images of Fig. 7b, we noticed that, due to the reduced thickness of the silica, the distance between the gold cores appears reduced. In this case, the spectrum of the solution and the spectrum of the film (Fig. 11) are different; in particular, the longitudinal plasmonic bands of the film spectrum are red-shifted and broadened with respect to those of the spectrum in solution. This behavior is attributed to the coupling of the plasmonic fields, allowed by the reduced distance between the gold cores.
Sample 3′′ 5 nm × 3.5 nm
Looking at the TEM images in Fig. 7c, the thickness of the silica shell is so thin that it is barely visible. The longitudinal plasmon band of the film spectrum (Fig. 11), with respect to the spectrum in solution, is red-shifted, but the band broadening in the film spectrum is impressive. This behavior is attributed to the coupling of the plasmonic fields, allowed by the reduced distance between the gold cores of the AuNRs due to a very thin silica shell of 5 nm × 3.5 nm.
Conclusion
Various parameters control the growth and thickness of silica shell of gold nanorods, but the obtained results show that the impact of the parameters is different, and small variations of someone can produce very important effects. For example, pH and CTAB concentration are difficult to modulate, while TEOS concentration is not very sensitive, because, as reported in Table 1, important variations of this parameter do not cause relevant thickness variations; on the contrary, the amount of AuNR@CTAB seems to be more decisive for determining the thickness of the silica (Table 2). What appears to be decisive in controlling silica thickness is the [TEOS]/[AuNR@CTAB] ratio (Fig. 12), while to monitor the actual growth of silica on AuNRs, the most suitable observable is the volume of silica shell, calculated from TEM images.
The thickness of the silica determines the position of the plasmon band of single and assembled gold nanorods. The effectiveness of the coupling depends on the mutual distance of the gold cores, which in turn depends on the thickness of the silica. In this perspective, using the silica shell as a spacer, it is possible to measure the edge-to-edge distance between the gold cores. By measuring the edge-to-edge distance between the gold cores of the examined samples, we found that it shortens by decreasing the silica thickness, thus allowing for better coupling. In particular, the coupling of the plasmonic fields is effective when the distance between the nanoparticles is not greater than 10 nm, that is, in samples 3′ and 3′′, while if the distance is greater, no nanorods interact with each other and no difference is visible between solution and film spectra. The use of silica as a covering agent is an interesting way to regulate the plasmonic properties of gold nanorods. The longitudinal band moves towards the near-infrared as a function of the thickness of the shell, which determines the interaction between the gold cores and consequently the occurrence of plasmonic coupling. Consequently, gold-core/silica-shell nanorods are of considerable interest for a wide range of possible fields of application.
References
Abadeer NS, Brennan MR, Wilson WL, Murphy CJ (2014) Distance and plasmon wavelength dependent fluorescence of molecules bound to silica-coated gold nanorods. 8392–8406
Adelt M, Maclaren DA, Birch DJS, Chen Y (2021) Morphological changes of silica shells deposited on gold nanorods: implications for nanoscale photocatalysts. ACS Applied Nano Materials 4:7730–7738. https://doi.org/10.1021/acsanm.1c00977
Ahijado-Guzmán R, González-Rubio G, Izquierdo JG et al (2016) Intracellular pH-induced tip-to-tip assembly of gold nanorods for enhanced plasmonic photothermal therapy. ACS Omega 1:388–395. https://doi.org/10.1021/acsomega.6b00184
Burda C, Chen X, Narayanan R, El-Sayed MA (2005) Chemistry and properties of nanocrystals of different shapes
Candreva A, Di Maio G, La Deda M (2020) A quick one-step synthesis of luminescent gold nanospheres. Soft Matter 16:10865–10868. https://doi.org/10.1039/d0sm02024a
Carrasco S, Benito-Peña E, Navarro-Villoslada F et al (2016) Multibranched gold-mesoporous silica nanoparticles coated with a molecularly imprinted polymer for label-free antibiotic surface-enhanced raman scattering analysis. Chem Mater 28:7947–7954. https://doi.org/10.1021/acs.chemmater.6b03613
Chen H, Shao L, Li Q, Wang J (2013) Gold nanorods and their plasmonic properties. Chem Soc Rev 42:2679–2724. https://doi.org/10.1039/c2cs35367a
Comenge J, Fragueiro O, Sharkey J et al (2016) Preventing plasmon coupling between gold nanorods improves the sensitivity of photoacoustic detection of labeled stem cells in vivo. ACS Nano 10:7106–7116. https://doi.org/10.1021/acsnano.6b03246
Coursault D, Grand J, Zappone B et al (2012) Linear self-assembly of nanoparticles within liquid crystal defect arrays. Adv Mater 24:1461–1465. https://doi.org/10.1002/adma.201103791
Creighton JA, Eadon DG (1991) Ultraviolet-visible absorption spectra of the colloidal metallic elements. J Chem Soc, Faraday Trans 87:3881–3891. https://doi.org/10.1039/FT9918703881
Cretu C, Aa A, Candreva A et al (2018) Bisubstituted-biquinoline cu(i) complexes: synthesis, mesomorphism and photophysical studies in solution and condensed states. Journal of Materials Chemistry c 6:10073–10082. https://doi.org/10.1039/c8tc02999g
Eustis S, El-Sayed MA (2006) Why gold nanoparticles are more precious than pretty gold: noble metal surface plasmon resonance and its enhancement of the radiative and nonradiative properties of nanocrystals of different shapes. Chem Soc Rev 35:209–217. https://doi.org/10.1039/b514191e
Gorelikov I, Matsuura N (2008) Single-step coating of mesoporous silica on cetyltrimethyl ammonium bromide-capped nanoparticles. Nano Lett 8:369–373. https://doi.org/10.1021/nl0727415
Guerrero-Martínez A, Pérez-Juste J, Liz-Marzán LM (2010) Recent progress on silica coating of nanoparticles and related nanomaterials. Adv Mater 22:1182–1195. https://doi.org/10.1002/adma.200901263
Hao E, Schatz GC, Hupp JT (2004) Synthesis and optical properties of anisotropic metal nanoparticles. J Fluoresc 14:331–341. https://doi.org/10.1023/B:JOFL.0000031815.71450.74
Ionescu A, Caligiuri R, Godbert N et al (2019) Electropolymerizable iriii complexes with β-ketoiminate ancillary ligands. Chem Asian J 14:3025–3034. https://doi.org/10.1002/asia.201900521
Jain PK, Eustis S, El-Sayed MA (2006) Plasmon coupling in nanorod assemblies: optical absorption, discrete dipole approximation simulation, and exciton-coupling model. J Phys Chem B 110:18243–18253. https://doi.org/10.1021/jp063879z
Jiang L, Mundoor H, Liu Q, Smalyukh II (2016) Electric switching of fluorescence decay in gold-silica-dye nematic nanocolloids mediated by surface plasmons. ACS Nano 10:7064–7072. https://doi.org/10.1021/acsnano.6b03216
Kawamura G, Yang Y, Nogami M (2007) Facile assembling of gold nanorods with large aspect ratio and their surface-enhanced Raman scattering properties. Appl Phys Lett 90:1–3. https://doi.org/10.1063/1.2752026
Kumar J, Wei X, Barrow S et al (2013) Surface plasmon coupling in end-to-end linked gold nanorod dimers and trimers. Phys Chem Chem Phys 15:4258–4264. https://doi.org/10.1039/c3cp44657c
Liz-Marzán LM, Giersig M, Mulvaney P (1996) Synthesis of nanosized gold-silica core-shell particles. Langmuir 12:4329–4335. https://doi.org/10.1021/la9601871
Lunn DJ, Finnegan JR, Manners I (2015) Self-assembly of “patchy” nanoparticles: a versatile approach to functional hierarchical materials. Chem Sci 6:3663–3673. https://doi.org/10.1039/c5sc01141h
Mayer KM, Hafner JH (2011) Localized surface plasmon resonance sensors. Chem Rev 111:3828–3857. https://doi.org/10.1021/cr100313v
Ming T, Zhao L, Yang Z, et al (2009) Strong polarization dependence of.pdf
Murphy CJ, Thompson LB, Chernak DJ et al (2011) Gold nanorod crystal growth: from seed-mediated synthesis to nanoscale sculpting. Curr Opin Colloid Interface Sci 16:128–134. https://doi.org/10.1016/j.cocis.2011.01.001
Ni W, Mosquera RA, Párez-Juste J, Liz-Marzán LM (2010) Evidence for hydrogen-bonding-directed assembly of gold nanorods in aqueous solution. J Phys Chem Lett 1:1181–1185. https://doi.org/10.1021/jz1002154
Pellas V, Hu D, Mazouzi Y, et al (2020) Gold nanorods for lspr biosensing: synthesis, coating by silica, and bioanalytical applications
Pérez-Juste J, Pastoriza-Santos I, Liz-Marzán LM, Mulvaney P (2005) Gold nanorods: synthesis, characterization and applications. Coord Chem Rev 249:1870–1901. https://doi.org/10.1016/j.ccr.2005.01.030
Pf L, Ghedini M, La Deda M et al (2020) Electrochromic behaviour of ir(iii) bis-cyclometalated 1,2-dioxolene tetra-halo complexes: fully reversible catecholate/semiquinone redox switches. Dalton Trans 49:2628–2635. https://doi.org/10.1039/c9dt04848k
Rožič B, Fresnais J, Molinaro C et al (2017) Oriented gold nanorods and gold nanorod chains within smectic liquid crystal topological defects. ACS Nano 11:6728–6738. https://doi.org/10.1021/acsnano.7b01132
Sahu AK, Raj S Effect of plasmonic coupling in different assembly of gold nanorods
Scarabelli L, Grzelczak M, Liz-Marzán LM (2013) Tuning gold nanorod synthesis through prereduction with salicylic acid. Chem Mater 25:4232–4238. https://doi.org/10.1021/cm402177b
Scarabelli L, Sánchez-Iglesias A, Pérez-Juste J, Liz-Marzán LM (2015) A “Tips and Tricks” practical guide to the synthesis of gold nanorods. J Phys Chem Lett 6:4270–4279. https://doi.org/10.1021/acs.jpclett.5b02123
Teranishi T, Kurita R, Miyake M (2000) Shape control of Pt nanoparticles. J Inorg Organomet Polym Mater 10:145–156. https://doi.org/10.1023/A:1009476128466
Vial S, Pastoriza-Santos I, Pérez-Juste J, Liz-Marzán LM (2007) Plasmon coupling in layer-by-layer assembled gold nanorod films. Langmuir 23:4606–4611. https://doi.org/10.1021/la063753t
Wang Y, Long S, Vdović S, Wang X (2013a) Fine tuning of the longitudinal plasmon resonance of gold nanorods by depleting gold precursor. Chem Mater 25:1372–1376. https://doi.org/10.1021/cm301832d
Wang F, Cheng S, Bao Z, Wang J (2013b) Anisotropic overgrowth of metal heterostructures induced by a site-selective silica coating. Angewandte Chemie - International Edition 52:10344–10348. https://doi.org/10.1002/anie.201304364
Wang S, Lin Q, Xu W et al (2020) Precisely tuning the longitudinal localized surface plasmon resonance of gold nanorods: Via additive-regulated overgrowth. RSC Adv 10:12619–12625. https://doi.org/10.1039/d0ra00579g
Wu WC, Tracy JB (2015) Large-scale silica overcoating of gold nanorods with tunable shell thicknesses. Chem Mater 27:2888–2894. https://doi.org/10.1021/cm504764v
Wu J, Xiang D, Gordon R (2016) Characterizing gold nanorods in aqueous solution by acoustic vibrations probed with four-wave mixing. Opt Express 24:12458. https://doi.org/10.1364/oe.24.012458
Xia BY, Yang P, Sun Y, et al (2003) One-dimensional nanostructures: synthesis, characterization, and applications**. 353–389
Yamada S, Niidome Y (2006) Chapter 14 Gold nanorods: preparation, characterization, and applications to sensing and photonics. Handai Nanophotonics 2:255–274. https://doi.org/10.1016/S1574-0641(06)80020-3
Zhang Y, Liu Q, Mundoor H et al (2015) Metal nanoparticle dispersion, alignment, and assembly in nematic liquid crystals for applications in switchable plasmonic color filters and E-polarizers. ACS Nano 9:3097–3108. https://doi.org/10.1021/nn5074644
Acknowledgements
The author, A.C., is grateful to Prof. Luis Liz-Marzan (Scientific director of CIC-Biomagune, Spain) for welcoming her into his laboratory and for her mentoring of nanoparticle synthesis techniques.
Funding
Italian Ministry of University and Research supported this research through DEMETRA project (PON ARS01_00401).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Candreva, A., Lewandowski, W. & La Deda, M. Thickness control of the silica shell: a way to tune the plasmonic properties of isolated and assembled gold nanorods. J Nanopart Res 24, 19 (2022). https://doi.org/10.1007/s11051-022-05402-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11051-022-05402-w