Abstract
The subsurface soil and rock characteristics in the Colachel Harbor area are investigated in this study utilizing resistivity and magneto-telluric methods. The obtained data utilizing clay formation investigations and the Carbon Floating 2D Electrical Resistivity Tomography (ERT) method, which included CRM-500 AUTO-C equipment, multi-carbon floating electrodes, multicore cables, and a manually operated switching unit. Two 2D electrical resistivity imaging profiles were obtained utilizing the Wenner configuration, providing precise insights into subsurface lithology up to a depth of 300 m. High-wave impact on fractured rock fragments in Varkala sandstone resulted in clay soil layers at depths ranging from 2.52 m to 2.75 m. The findings demonstrate the effectiveness of 2D Electrical Resistivity Imaging (ERI) in identifying underlying soil and rock exposures, which is critical for harbor building and coastal management. Identifying an expanding clay layer resembling fine-grained silt and clay on the seafloor is crucial for understanding sediment transport and deposition mechanisms in the region. Implications point to the necessity for additional geotechnical evaluations and ongoing monitoring to ensure coastal infrastructure stability and sustainability. For thorough subsurface characterization, the combination of resistivity and magneto-telluric techniques works well, and the results provide useful information for coastal development plans in the future.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
The main objective of this study is to determine the apparent resistivity of the bedrock formation and shallow clay soil using an electrical resistivity method, an magneto-telluric study for future construction, and a geological and electrical resistivity investigation using the Auger borehole soil sampling method. Several studies have highlighted the importance of geophysical and geochemical methods in understanding coastal and subsurface dynamics in southern India. Jeyapaul et al. (2020) conducted a case study on freshwater discharge in porous calcarenite formations in the coastal terrace at Manapad, South India, providing valuable insights into the groundwater flow and storage characteristics of such formations. Ravindran et al. (2024a, b) investigated tectonic signatures in Proterozoic quartzite formations in the Kovilpatti region, focusing on the Kurumalai and Oodumalai hills, revealing significant tectonic features and underscoring the area complex geological history. Ravindran et al. (2024a, b) conducted geophysical and geochemical studies on sinking stream occurrences in Ayankulam village, highlighting the interaction between surface water and groundwater in karst terrains. Abishek et al. (2024) assessed depositional environmental factors in Quaternary sediments of the Thamirabarani River basin, offering a detailed examination of sediment characteristics and depositional environments. Together, these studies provide a robust framework for understanding the geological, hydrological, and environmental dynamics in southern India, supporting the need for integrated geophysical and geochemical approaches in coastal and subsurface investigations. Geotechnical and geoelectrical investigations play critical roles in engineering construction (Stummer et al. 2004; Kouzana et al. 2009; Batayneh et al. 2010). It also plays a significant virtual role in the construction of structures near coastlines (Bo 2015). The geotechnical investigation was applied to shallow foundation studies, specifically subsoil investigations (Nwankwoala and Amadi 2013; Oghenero et al. 2014). Geotechnical investigations have found soil and rock properties for civil engineering construction and design in a variety of situations (Rong, 2024). The region is dominated by Palaeo marine deposits of alluvium soil. The Deep Sea Drilling Project and deep wells in recent and tertiary sediments from Japan and Italy demonstrate that these sediments do not conform to a single, simple compaction (porosity-depth) equation at all depths. Velde (1996) discovered that clay-rich sediments in the deep sea have an initial porosity of 75–90%, which drops to around 40% at 500 m depth. The geotechnical properties of clay sediments were examined using laboratory and in-situ measurements as part of a Geohazards assessment in the Romanian Black Sea region impacted by landslides and seafloor deformation. Ballas et al. (2018) describe the sediments as mostly high-plastic silty clay with high compressibility, low untrained shear strength, low cohesion, and moderate sensitivity. According to Hashemi et al. (2022), layered seabed soil strata found in many geographical locations complicate assessing the ice keel-seabed interaction process by indicating the effect of strain rate dependence and strain softening in soil layer interaction areas and the ice-seabed contact zone. This research examines the effect of basic geotechnical characteristics on the electrical resistivity (ρ) of marine clay. Zhang et al. (2018) performed resistivity piezocone cone penetration tests (RCPTU) at six locations in Jiangsu, China. These findings should help engineers evaluate resistivity investigations in coastal clay areas. Increased urbanization and development in previously marginal areas has forced the need to protect people, the environment, and infrastructure from risks like quick-clay landslides. Solberg (2016) analyzes and studies the potential given by gathering significant volumes of data in the aftermath of the quick-clay landslide at Esp, Trondheim, Norway, in 2012. In this study, the 2D ERI marine resistivity of unique carbon floating electrodes was determined using the Wenner configuration approach. The acquired resistivity data was interpreted using the Res2DINV software, which produced the apparent resistivity and pseudo-profile of exposed rock and soil under water. During deep mapping, Antony Ravindran et al. (2021) used the magneto-telluric resistivity technique to identify underground rock characteristics in the port rock formation. The 2D resistivity measurements were utilized to estimate the spread of leached clay, and the results guided the subsequent geotechnical investigations. This is one of the rare Norwegian studies that use two-dimensional resistivity measurements to assess ground conditions in an industrial project. The data sets agreed quite well on the existence of sensitive or fast clays. The study clearly demonstrates that the combination of resistivity measurements and geotechnical borings has the potential to be a powerful site investigation strategy, particularly for mapping large areas or long-stretched road corridors, as conducted by Sandven, R., and Solberg, I. L. (2014). The factors that control grain size distribution in the Gulf, as well as the clay mineralogy and chemistry of some bottom sediments from the outer Thermaikos Gulf, are examined. Pehlivanoglou et al. (2004) identify source mixing during transportation, flocculation, differential settling processes, and organic matter as the key factors governing clay mineral distribution in shallow waters. The mineralogy and geotechnical qualities of maritime clay at Changi, Singapore, have been thoroughly investigated (Bo et al. 2015). Eberl (1984) investigated the creation and change of clay minerals in rocks and soils, providing useful insights. In another study, Watson et al. (2013) examined historical sediment deposition in a closed estuary lagoon in Central California, with a focus on particle size characterisation. However, only a few studies have looked at the sediment characteristics of the entire Qiantang Estuary, namely the link between hydrodynamics and sediment properties. Wang et al. (2015) and 2022) use systematic sampling to investigate the geographical distribution of the Qiantang Estuary surface sediment, including grain size composition and particle size parameters, in various areas of the estuary. Antony Ravindran and Mondal (2015) used CRM-500 equipment and a microscope to undertake geotechnical research in maritime environments, including grain size analysis and the electrical resistivity approach. The electrical resistivity values in the research area range from 1 to 5 Ω-m for saltwater, 5–50 Ω-m for sandstone, and above 400 Ω-m for weathered genesis rock. The existence of clay formations on the seafloor has significant ramifications for a wide range of geological and environmental processes. The objective of this study is to define and comprehend the clay deposits in the Colachel coastal area using resistivity and granulometric techniques.
Study area
The research area, located at 8°10’16.1"N 77°15’01.4"E, consists mostly of coastal sand and clay deposits (Fig. 1). This region has a variety of coastal landforms, including elevated coastal cliffs with marine sediments. Through diagenesis process of these sediments is metamorphism into sand and clay mediums. This research aims to estimate the underwater seabed formations of soil, clay, and sand, as well as bedrock exposure in the Colachel area and its environs, as recorded by Thamarai (2008) and Perumal and Subramanian (2022).
The area is distinguished by huge dune terraces connected by tectonic uplift at the coastal and oceanic plate boundaries. These terraces are distinguished by their upper layers, which are fully coated in shell debris, indicating strong maritime influence and sedimentation. The underlayment beneath this shell-covered layer consists of a mixture of very coarse and fine clay, sandstone, and the characteristic reddish-colored Varkala clay intermingled with sandstone, as described by Hentry (2010). A distinctive coastal environment has developed as a result of the interplay between tectonic processes and sediment deposition, which has resulted in the construction of a complicated stratigraphy throughout the region’s geological history. This location not only displays a diverse range of sediment types, but it also demonstrates the dynamic processes of sediment transformation and tectonic movement that define the coastal landscape. A thorough investigation of these formations will provide light on the geological evolution of the Colachel region and contribute to our understanding of coastal sediment dynamics.
Materials and methods
The current research focuses on clay formation investigations in the seabed utilizing electrical resistivity imaging, electromagnetic methods, and soil sampling with an auger (Fig. 2). The process entails performing two profiles of electrical resistivity imaging up to a distance of 100 m and electromagnetic profiling to a depth of 1000 feet. In addition, 5 clay soil samples were taken from the seabed using an auger, as well as rock and soil samples for additional investigation. The magneto telluric (MT) approach was used to discriminate between fresh and salt water interfaces throughout the coastal terrace. Seabed formation was determined using a 2D electrical resistivity imaging approach, while electromagnetic deeper profiles offered extensive information on structurally controlled seabed formation, charnockite, fault zones, vertical dipping of rock formations, and groundwater seepages. This study expands on the findings of Aro et al. (2023), Folk and Ward (1957), Venkatramanan et al. (2013), Watson (2013) on statistical grain size distribution and coastal geomorphology. The clay soil samples taken from the field were mechanically sieved before being analyzed microscopically for grain sorting at V.O. Chidambaram College Research Laboratory in Thoothukudi. This complete description of the study procedures guarantees a thorough comprehension of the methodologies employed in clay formation investigations.
Result and discussion
The resistivity analysis revealed distinct stratifications within the seabed, highlighting areas with higher resistivity values that are indicative of clay deposits. Granulometric analysis further validated the presence of clay-sized particles in the sediment samples, providing insight into the distribution and characteristics of the clay formations.
Electrical resistivity technique (2D ERT)
The 2D Electrical Resistivity Imaging (ERI) technology is a quick and inexpensive way to detect both perpendicular and linear variations in subsurface resistivity (Fig. 3). This technique is commonly used to characterize shallow subsurface research, including the assessment of mining reserves. Profile 1, which measured 100 m and used the Wenner configuration, revealed distinct subsurface stratigraphy: a subsurface clay layer with resistivity values of 2–4 ohm.m., granulitic gneiss rock with resistivity values of 4–10 ohm.m., and weathered gneissic rock with intrusive rock with resistivity values of 10–25 ohm.m. This profile identifies locations with high porosity and potential groundwater storage. Profile 2, located on the eastern side of the building site and spanning 100 m, revealed a top layer of clay formation with resistivity values ranging from 1 to 5 ohm/m, as well as shallow sandy-shell formations at a depth of 3 m. The middle section had a downward layer of clay and silt deposition due to rocky topography, with apparent resistivity values ranging from 10 to 200 ohm.m (Table 1). Low resistivity readings (blue color) suggested clay layers on the construction site, indicating areas prone to water retention and deformation.
Magneto Telluric method
The ADMT-300 S water detector, which uses the magneto telluric (MT) technology, is a dependable tool for electrical prospecting (Vinoth Kingston et al. 2022). It efficiently addresses concerns with fluctuating natural electric field sources by delivering stable and high-resolution measurements (Fig. 4). The entire hillock in Profile 1, which was 100 m in length and 300 m in depth, was covered in rough, hard charnockite rock. Intrusive genesis and granitic rock were found with resistivity values of 0.0020–0.004 Ω.m. The gneissic rock formation, at a depth of 300 m with a top layer of 40 m, showed less fragmented zones with a resistivity of 0.0075 Ω.m., indicating a highly resistive and compact subsurface (Table 2). Profile 2, stretching 54 m in length and 300 m in depth, revealed an intrusive formation at a depth of 300 m. The top layer of 180 m comprised hard, compact, and fractured zones with resistivity values ranging from 0.050 to 0.062 Ω.m indicating a significant presence of charnockite and intrusive gneiss. Profile 3, measuring 100 m in length and 300 m in depth, revealed the presence of sea water with clay formations showing resistivity ranges of 0.091 to 0.111 Ω.m. and meta-sedimentary rock associated with charnockite with resistivity ranges of 0.116 to 0.126 Ω.m. These findings are crucial for understanding the hydrological and geological dynamics of the area.
Grain size analysis
The systematic technique included collecting five soil samples from within and around the Colachel site area. The grain size investigation employs a column of sieve wire mesh cloth and a distinct sieve size, as well as systematic analysis. The grain was sorted based on size using higher and lower opening sieve sizes. The experimental test was carried out using a sieve shaker. The sample was mechanically tested and sieved using a sieve shaker to evaluate the size and form of the soil grains (Fig. 5). Soil samples taken at bottom depths ranging from 0 to 2.52 m are thoroughly examined in the geology department mechanical research laboratory (Fig. 6). The cumulative frequency curve is generated by graphing the size (Phi) values against the cumulative percentage (Table 3). The microscopic examination is utilized to determine the shape and size of the grain, as well as to properly sort the grain, which aids in the differentiation between coastal and estuarine habitats. Five samples’ grain size examination revealed the following grains: sand, loamy sand, sandy loam, sandy clay loam, sandy clay, clay, silty clay, silty clay loam, loam, silty loam, silt, very coarse sand, coarse sand, medium sand, fine sand, very fine sand, coarse silt, fine silt, and clay. Coastal and estuarine geomorphologies exhibit unique grain sorting and transit patterns, such as coarse-grained river sediments; medium to fine sorting suggests coastal settings. The mixing of coastal and estuarine sediment populations is investigated using shape index analysis. Sandy loam, sandy clay loam, clay, sandy clay, silty clay loam, silty loam, and silt (Fig. 7). The data show that considerable clay deposition affects the seabed of the Colachel coastal area, potentially affecting coastal dynamics, sediment transport, and marine habitats. The combination of resistivity and granulometric approaches provides a thorough understanding of clay formations, which contributes to a better understanding of geological processes in coastal areas.
Conclusion
The extensive resistivity and granulometric analyses conducted in the Colachel coastal area have revealed important information about the region’s underlying properties and sediment composition. The 2D Electrical Resistivity Imaging (ERI) technology successfully revealed various stratifications in the seabed, highlighting places with higher resistivity values, which are indicative of clay deposits. The comprehensive profiles provided vital information on subsurface clay layers, granulitic gneiss rocks, and weathered gneissic rocks, indicating areas with high porosity and possible groundwater storage. The magneto telluric (MT) approach, which uses the ADMT-300 S water detector, has improved our understanding of geological formations at higher depths. The profiles derived from MT measurements verified the presence of hard, compact, and cracked zones inside charnockite and intrusive gneissic rocks, as well as sea water in clay formations and meta-sedimentary rocks. These findings are critical for determining the geological integrity and hydrological dynamics of the region. The grain size analysis examined soil samples in depth, revealing a wide range of particle sizes and kinds, such as sand, loamy sand, sandy loam, sandy clay loam, sandy clay, clay, silty clay, silty clay loam, loam, silty loam, silt, and various sand fractions. The analysis revealed unique grain sorting and transport patterns in coastal and estuarine environments, with considerable clay deposition influencing bottom dynamics and sediment transport mechanisms. The combination of resistivity and granulometric techniques has proven to be a reliable way for describing clay formations and understanding geological processes in coastal areas. The findings of this study help to improve our understanding of coastal dynamics, sediment transport, and marine ecosystems in the Colachel coastal area. These findings have significant implications for future construction projects, groundwater management, and environmental monitoring, all of which aim to ensure sustainable development and the protection of coastal resources.
Data availability
No datasets were generated or analysed during the current study.
References
Abishek SR, Christinal J, Ravindran AA, Priya RS (2024) Assessment of depositional environmental factors in quaternary sediments: a case study of Thamirabarani River basin, Srivaikundam region of southern India. Discover Geoscience 2(1):13
Antony Ravindran A, Mondal NC (2015) Geotechnical investigation for resort construction using resistivity and granulometric studies in Pattinamaruthur Coast, Southern India. Geotech Geol Eng 33:1335–1350
Antony Ravindran A, Vinoth Kingston J, Hepzibah Premshiya K (2021) Mitigation dredging in seabed geotechnical engineering study using marine 2D ERI and textural characteristics in Thengapattanam harbour, South India. Geotech Geol Eng 39:897–907
Aro OE, Jones SJ, Meadows NS, Gluyas J, Charlaftis D (2023) The importance of facies, grain size and clay content in controlling fluvial reservoir quality–an example from the triassic skagerrak formation, Central North Sea, UK. Pet Geosci, 29(2)
Ballas G, Garziglia S, Sultan N, Pelleter E, Toucanne S, Marsset T, Ker S (2018) Influence of early diagenesis on geotechnical properties of clay sediments (Romania, Black Sea). Eng Geol 240:175–188
Batayneh AT, Elawadi EA, Al-Arifi NS (2010) Use of geoelectrical technique for detecting subsurface fresh and saline water: a case study of the eastern gulf of Aqaba coastal aquifer, Jordan. J Coastal Res 26(6):1079–1084
Bo MW, Arulrajah A, Sukmak P, Horpibulsuk S (2015) Mineralogy and geotechnical properties of Singapore Marine clay at Changi. Soils Found 55(3):600–613
Eberl DD (1984) Clay mineral formation and transformation in rocks and soils. Philosophical Trans Royal Soc Lond Ser Math Phys Sci 311(1517):241–257
Folk RL, Ward WC (1957) Brazos River bar [Texas]; a study in the significance of grain size parameters. J Sediment Res 27(1):3–26
Hashemi S, Shiri H, Dong X (2022) The influence of layered soil on ice-seabed interaction: soft over stiff clay. Appl Ocean Res 120:103033
Hentry C, Chandrasekar N, Saravanan S, Dajkumar Sahayam J (2010) Influence of geomorphology and bathymetry on the effects of the 2004 tsunami at Colachel, South India. Bull Eng Geol Environ 69:431–442
Jeyapaul VK, Jebamalai A, Selvam AR, Krishnaveni RAS, A., Johnson A, A. A. P (2020) A case study of freshwater discharge in porous calcarenite formation in coastal terrace at Manapad, South India. Carbonates Evaporites 35:1–14
Kouzana L, Mammou AB, Felfoul MS (2009) Seawater intrusion and associated processes: case of the Korba aquifer (Cap-Bon, Tunisia). CR Geosci 341(1):21–35
Nwankwoala HO, Amadi AN (2013) Geotechnical Investigation of Sub-soiland Rock characteristics in parts of Shiroro. -Muya-Chanchaga Area of Niger State, Nigeria
Oghenero AE, Akpokodje EG, Tse AC (2014) Geotechnical Properties of Subsurface Soils in Warri, Western Niger Delta, Nigeria. J Earth Sci Geotech Eng 4(1):89–102
Pehlivanoglou KG, Trontsios G, Tsirambides A (2004) Grain size distribution, clay mineralogy and chemistry of bottom sediments from the outer Thermaikos Gulf, Aegean Sea, Greece. Mediterranean Mar Sci 5(1):43–54
Perumal SB, Subramanian VB (2022) Study of geological parameters along the Coastal Area of Arabian Sea, Kanyakumari to Colachel, South Tamilnadu, India. Elementary Educ Online 20(1):4888–4888
Ravindran AA, Abinaya R, Abishek SR, Kingston JV, Promilton AAA, Priya RS (2024a) Geophysical exploration of tectonic signatures in proterozoic quartzite of the Kovilpatti region, Southern India: a study in the Kurumalai and Oodumalai hills. Carbonates Evaporites 39(2):59
Ravindran AA, Promilton A, Kingston JV, Abishek SR, Aswin SK, Abinaya R, Priya RS (2024b) Geophysical and geochemical studies on sinking stream occurrence in Ayankulam village of South Tamilnadu, India. Proceedings of the Indian National Science Academy, 1–15
Rong J, Nazem M, Chow SH, Zhou A, Moridpour S (2024) Design and application of dynamic seabed penetrators in offshore geotechnical engineering: a review. Ocean Eng 293:116599
Sandven R, Solberg IL (2014) Geophysical and geotechnical investigations for a major highway in a quick-clay area. Landslides Sensitive Clays: Geosci Risk Manage, 205–216
Solberg IL, Long M, Baranwal VC, Gylland AS, Rønning JS (2016) Geophysical and geotechnical studies of geology and sediment properties at a quick-clay landslide site at Esp, Trondheim, Norway. Eng Geol 208:214–230
Stummer P, Maurer H, Green AG (2004) Experimental design: Electrical resistivity data sets that provide optimum subsurface information. Geophysics 69(1):120–139
Thamarai SBPP (2008) Lithological Studies and types of soils along Coastal Area of Kanyakumari to Colachel Coastal Belt, South Tamil Nadu, India. Nat Environ Pollution Technol, 7
Velde B (1996) Compaction trends of clay-rich deep sea sediments. Mar Geol 133(3–4):193–201
Venkatramanan S, Ramkumar T, Anithamary I (2013) Distribution of grain size, clay mineralogy and organic matter of surface sediments from Tirumalairajanar Estuary, Tamilnadu, east coast of India. Arab J Geosci 6:1371–1380
Vinoth Kingston J, Antony Ravindran A, Abishek R, Aswin S, S. K., Promilton AA, A (2022) Integrated Geophysical and geochemical assessment of submarine groundwater discharge in coastal terrace of Tiruchendur, Southern India. Appl Water Sci 12(1):9
Wang J, Li A, Xu K, Zheng X, Huang J (2015) Clay mineral and grain size studies of sediment provenances and paleoenvironment evolution in the middle Okinawa Trough since 17 ka. Mar Geol 366:49–61
Wang S, Pan C, Xie D, Xu M, Yan Y, Li X (2022) Grain size characteristics of surface sediment and its response to the dynamic sedimentary environment in Qiantang Estuary, China. Int J Sedim Res 37(4):457–468
Watson EB, Pasternack GB, Gray AB, Goñi M, Woolfolk AM (2013) Particle size characterization of historic sediment deposition from a closed estuarine lagoon, Central California. Estuar Coast Shelf Sci 126:23–33
Zhang T, Liu S, Cai G (2018) Correlations between electrical resistivity and basic engineering property parameters for marine clays in Jiangsu, China. J Appl Geophys 159:640–648
Acknowledgements
The First author expresses his gratefully acknowledges to Shri. A. P. C. V. Chockalingam, Secretary and Dr. C. VeeraBhahu, Principal, V.O.Chidambaram College, Tuticorin for their support and guidance. The help was extended by our professors and research scholars in PG and Research Department of Geology, V.O.Chidambaram College, Thoothukudi. This part of the work is PhD research work of second author Sakthi Priya R, (Reg.no:23112232222008).
Funding
There is no funding source for this study.
Author information
Authors and Affiliations
Contributions
Antony Ravindran A - Supervision and Project administration. Sakthi Priya R – Conceptualization, Software, Writing - Original Draft and Data Curation. Richard Abishek S - Data Collection, Review and Editing. Vinoth Kinston J – Data Collection, Review and Editing. Antony Alosanai Promilton A - Data Collection and Methodology. Abinaya R - Writing - Review & Editing and Methodology.
Corresponding author
Ethics declarations
Ethical approval
Not applicable.
Consent to participate
Not applicable.
Consent to publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
A, A.R., R, S.P., S, R.A. et al. Exploring clay formation in the seabed of Colachel coastal area, southern Tamil Nadu, India: a geophysical and granulometric analysis. Mar Geophys Res 45, 20 (2024). https://doi.org/10.1007/s11001-024-09554-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11001-024-09554-3